Parts Place Catalog

1.0 INTERIOR

Factory interior colors that are available -- specify when ordering


64	BLACK, LIGHT BLUE, RED, SADDLE, WHITE
65	BLACK, LIGHT BLUE, PEARL, RED, OFF WHITE, IVY GOLD, METALLIC RED, SLATE
66	BLACK, LIGHT BLUE, PARCHMENT, RED, METALLIC RED
67	BLACK, LIGHT BLUE, RED, PARCHMENT
68	BLACK, LIGHT BLUE, 68 BLUE, PEARL, IVY GOLD
69	BLACK, LIGHT BLUE, MUSTARD GOLD, LIGHT GREEN, RED, OFF WHITE


70	BLACK, 68 BLUE, DARK GREEN METALLIC, PEARL, DARK SADDLE, LIGHT BLUE, GOLD
71	BLACK, SIENNA BROWN, DARK BLUE, NAVY BLUE, JADE GREEN, PEARL, DARK SADDLE
72	BLACK, SIENNA BROWN, SANDALWOOD, DARK BLUE, DARK GREEN, WHITE, DARK SADDLE
73-77	SEE SEAT COVER APPLICATION FOR AVAILABLE COLORS
78-88	SEE SEAT COVER APPLICATION FOR AVAILABLE COLORS



SEAT COVERS (PUI)
72	IN3011T: FRONT BUCKET SEAT COVERS ("S" PUI) - PR	$249
72	IN3012T: FRONT BENCH SEAT COVER ("S" PUI)	$249
72	IN3013T: REAR BENCH SEAT COVER ("S" PUI) COUPE	$159
72	IN3014T: FRONT BUCKETS & REAR BENCH SEAT COVER SET ("S" PUI)	$399

72	IN5363T: FRONT BENCH & REAR BENCH SEAT COVER SET ("S" PUI)	$399
71-72	IN3025T: FRONT BUCKET SEAT COVERS (SUPREME PUI) - PR	$249
71-72	IN3026T: FRONT BENCH SEAT COVER WITH ARM REST (SUPREME PUI)	$249
71-72	IN3027T: REAR BENCH SEAT COVER (SUPREME PUI) COUPE	$159
71-72	IN3028T: REAR BENCH SEAT COVER (SUPREME PUI) CONVERTIBLE	$159
71-72	IN3029T: FRONT BUCKETS & REAR BENCH SEAT COVER SET (SUPREME PUI) COUPE	$399
71-72	IN5370T: FRONT BUCKETS & REAR BENCH SEAT COVER SET (SUPREME PUI) CONVERTIBLE	$399
71-72	IN5371T: FRONT BENCH & REAR BENCH SEAT COVER SET (SUPREME PUI) COUPE	$399
71-72	IN5372T: FRONT BENCH & REAR BENCH SEAT COVER SET (SUPREME PUI) CONVERTIBLE	$399


SEAT COVERS (LEGENDARY)
72	IN3003T: FRONT BUCKET SEAT COVERS ("S" LEGENDARY) - PR	$299
72	IN3005T: FRONT BENCH SEAT COVER ("S" LEGENDARY)	$299
72	IN3007T: REAR BENCH SEAT COVER ("S" LEGENDARY) COUPE	$179
72	IN3009T: FRONT BUCKETS & REAR BENCH SEAT COVER SET ("S" LEGENDARY)	$469

72	IN5361T: FRONT BENCH & REAR BENCH SEAT COVER SET ("S" LEGENDARY)	$469
71-72	IN3015T: FRONT BUCKET SEAT COVERS (SUPREME LEGENDARY) - PR	$289
71-72	IN3017T: FRONT BENCH SEAT COVER WITH ARM REST (SUPREME LEGENDARY)	$299


71-72	IN3019T: REAR BENCH SEAT COVER (SUPREME LEGENDARY) COUPE	$179
71-72	IN3021T: REAR BENCH SEAT COVER (SUPREME LEGENDARY) CONVERTIBLE	$179
71-72	IN3023T: FRONT BUCKETS & REAR BENCH SEAT COVER SET (SUPREME LEGENDARY) COUPE	$459
71-72	IN5364T: FRONT BUCKETS & REAR BENCH SEAT COVER SET (SUPREME LEGENDARY) CONVERTIBLE	$459
71-72	IN5366T: FRONT BENCH & REAR BENCH SEAT COVER SET (SUPREME LEGENDARY) COUPE	$469
71-72	IN5368T: FRONT BENCH & REAR BENCH SEAT COVER SET (SUPREME LEGENDARY) CONVERTIBLE	$469

HOG RING & PLIER KIT
INCLUDES OVER 100 HOG RINGS

	IN3142Z: HOG RING & PLIER KIT NEW HEAVY DUTY KIT	$15

BENCH SEAT RELATED ITEMS
64-72	IN3051T: BENCH SEAT SIDE SUPPORT SPRINGS (LOWER)	$34

66-72	IN5249Z: BENCH SEAT SIDE COVERS (THESE ARE THE COVERS ON THE SIDE OF THE SEAT THAT COVER THE HINGES) - PR	$49
68-72	IN3053T: FRONT SPLIT-BENCH SEAT FOAM FOR CARS WITHOUT ARMREST (UPPER & LOWER - THIN FOAM WITH SEAT BACK FRAME WITH SPRING)	$189
68-72	IN9736T: FRONT SPLIT-BENCH SEAT FOAM FOR CARS WITHOUT ARMREST (UPPER & LOWER - THICK FOAM WITH SEAT BACK FRAME WITHOUT SPRING)	$199

69-72	IN5265Z: BENCH SEAT HEADREST LOCK ASSEMBLY WITH KNOB (CHROME) - PR	$25

69-72	IN5266Z: BENCH SEAT HEADREST LOCK ASSEMBLY WITH KNOB (BLACK) - PR	$20

69-72	IN5270Z: BENCH SEAT HEADREST ESCUTCHEONS (CHROME) - PR	$16
64-72	IN8458T: BENCH SEAT BACK RELEASE BUTTON	$6


REAR SEAT RETAINER KIT
WELDS TO FLOOR PANS AND IS WHAT THE REAR SEAT SNAPS INTO

64-72	IN9643Z: REAR SEAT RETAINER KIT (4 PIECES)	$19

BUCKET SEATS
69-72	IN3058T: BUCKET SEAT	$CALL

BUCKET SEAT FRAME ASSEMBLY
NEW SEAT FRAME ASSEMBLY WITH SPRINGS. MADE OUT OF QUALITY STEEL. MUST ORDER ALL SEAT PARTS SEPARATELY (SEAT FOAM, SEAT BACKS, SEAT APRONS, SEAT TRACKS, SEAT COVERS, ETC.)
69-72	IN3061T: BUCKET SEAT FRAME ASSEMBLY NEW - EA	$329

BUCKET SEAT BACK LOCK ASSEMBLY
69-72	IN5936Z: BUCKET SEAT BACK LOCK ASSEMBLY NEW - INCLUDES THE WHOLE LOCK MECHANISM, SLIDER WITH CHROME BUTTON	$129

HEADRESTS & COVERS
NEW MOLDED HEADRESTS FOR BUCKET SEATS ONLY

70-72	IN2708Z: BUCKET SEAT HEADREST (BLACK) - EA	$79
68-72	IN3065T: BUCKET SEAT HEADREST COVERS (FACTORY COLORS) - PR	$39
68-72	IN10507T: BENCH SEAT HEADREST COVERS (FACTORY COLORS) - PR	$39

HEADREST CHROME LOCKS
THESE ARE THE CHROME HEADREST LOCKS THAT HAVE PLASTIC COVERS AND LOCK & RELEASE KNOBS

70-72	IN3812Z: HEADREST CHROME LOCK - EA	$10

70-72	IN3813Z: HEADREST CHROME LOCKS - SET OF FOUR	$35
69-72	IN10118T: HEADREST MOUNTING KIT (CAN BE USED TO REPLACE DAMAGED OR MISSING ORIGINAL COMPONENTS OR CAN BE USED TO ADD HEADRESTS TO 68 SEATS THAT DO NOT HAVE HEADRESTS. INCLUDES 2 INNER CHANNEL THAT HEADREST SLIDES INTO, LOCKS WITH KNOB (70-72), ESCUTCHEON, BACKING PLATE & 4 SCREWS - 1 KIT DOES 1 SEAT)	$49

SEAT FOAM - BUCKETS
68-72	IN3074T: BUCKET SEAT FOAM (BACK & BOTTOM FOR ONE SEAT) - EA	$59
68-72	IN3075T: BUCKET SEAT FOAM (BACK & BOTTOM FOR BOTH SEATS) - PR	$115

SEAT BACK (PLASTIC)
PLASTIC SEAT BACKS COME WITH SEAT CHROME ATTACHED
68-72	IN5294T: PLASTIC SEAT BACKS 68 ALL & 69-72 RECLINING SEATS ONLY (BLACK) - PR	$79
68-72	IN5295T: PLASTIC SEAT BACKS 68 ALL & 69-72 RECLINING SEATS ONLY (RED) - PR	$89


68-72	IN5296T: PLASTIC SEAT BACKS 68 ALL & 69-72 RECLINING SEATS ONLY (PEARL) - PR	$89
68-72	IN5297T: PLASTIC SEAT BACKS 68 ALL & 69-72 RECLINING SEATS ONLY (LIGHT BLUE) - PR	$89
68-72	IN5298T: PLASTIC SEAT BACKS 68 ALL & 69-72 RECLINING SEATS ONLY (MEDIUM BLUE) - PR	$89
68-72	IN9769T: PLASTIC SEAT BACKS 68 ALL & 69-72 RECLINING SEATS ONLY (WHITE) - PR	$89
69-72	IN5299T: PLASTIC SEAT BACKS (BLACK) - PR	$79
69-72	IN5300T: PLASTIC SEAT BACKS (RED) - PR	$89
69-72	IN5301T: PLASTIC SEAT BACKS (DARK BLUE) - PR	$89
69-72	IN5302T: PLASTIC SEAT BACKS (BRIGHT BLUE) - PR	$89
69-72	IN5303T: PLASTIC SEAT BACKS (PARCHMENT) - PR	$89
69-72	IN5304T: PLASTIC SEAT BACKS (DARK GREEN) - PR	$89
69-72	IN5305T: PLASTIC SEAT BACKS (LIGHT SADDLE) - PR	$89
69-72	IN5306T: PLASTIC SEAT BACKS (DARK SADDLE) - PR	$89
69-72	IN5307T: PLASTIC SEAT BACKS (SANDALWOOD) - PR	$89
69-72	IN5308T: PLASTIC SEAT BACKS (WHITE) - PR	$89
69-72	IN5309T: PLASTIC SEAT BACKS (PEARL) - PR	$89

SEAT SIDE APRONS (PLASTIC)
COMES WITH SEAT CHROME ATTACHED. ONE PAIR DOES ONE BUCKET SEAT
69-72	IN5271T: PLASTIC SEAT APRONS (BLACK) - PR	$49
69-72	IN5272T: PLASTIC SEAT APRONS (RED) - PR	$59
69-72	IN5273T: PLASTIC SEAT APRONS (DARK BLUE) - PR	$59
69-72	IN5274T: PLASTIC SEAT APRONS (BRIGHT BLUE) - PR	$59
69-72	IN5275T: PLASTIC SEAT APRONS (PARCHMENT) - PR	$59
69-72	IN5276T: PLASTIC SEAT APRONS (DARK GREEN) - PR	$59
69-72	IN5277T: PLASTIC SEAT APRONS (LIGHT SADDLE) - PR	$59
69-72	IN5278T: PLASTIC SEAT APRONS (DARK SADDLE) - PR	$59
69-72	IN5279T: PLASTIC SEAT APRONS (SANDALWOOD) - PR	$59
69-72	IN5280T: PLASTIC SEAT APRONS (WHITE) - PR	$59
69-72	IN5281T: PLASTIC SEAT APRONS (PEARL) - PR	$59


SEAT BACKS & SEAT APRONS KITS (PLASTIC)
KIT IS ENOUGH FOR BOTH SEATS AND INCLUDES CHROME
69-72	IN3096T: SEAT BACK & APRON KIT (BLACK) - 6 PIECES	$169
69-72	IN3097T: SEAT BACK & APRON KIT (RED) - 6 PIECES	$189
69-72	IN4952T: SEAT BACK & APRON KIT (DARK BLUE) - 6 PIECES	$189
69-72	IN4953T: SEAT BACK & APRON KIT (BRIGHT BLUE) - 6 PIECES	$189
69-72	IN4954T: SEAT BACK & APRON KIT (PARCHMENT) - 6 PIECES	$189
69-72	IN4955T: SEAT BACK & APRON KIT (DARK GREEN) - 6 PIECES	$189
69-72	IN4956T: SEAT BACK & APRON KIT (LIGHT SADDLE) - 6 PIECES	$189
69-72	IN4957T: SEAT BACK & APRON KIT (DARK SADDLE) - 6 PIECES	$189
69-72	IN4958T: SEAT BACK & APRON KIT (SANDALWOOD) - 6 PIECES	$189
69-72	IN4959T: SEAT BACK & APRON KIT (WHITE) - 6 PIECES	$189
69-72	IN4960T: SEAT BACK & APRON KIT (PEARL) - 6 PIECES	$189

BUCKET SEAT CHROME
SEAT CHROME GOES ON THE SEAT BACK AND APRONS. ONE KIT IS ENOUGH FOR BOTH SEATS - MUST ORDER STAINLESS END CAPS SEPARATELY

66-72	IN4697Z: BUCKET SEAT CHROME KIT (6 PIECE KIT MADE FROM BULK CHROME EDGING) - SET	$18
68-72	IN10733T: MOLDED BUCKE SEAT CHROME KIT (CORRECT MOLDED PLASTIC WITH CHROME MYLAR INSERTS WITH MOLDED ENDS) - SET	$85

66-72	IN4698Z: BUCKET SEAT CHROME STAINLESS END CAPS - EA	$1.50
66-72	IN5253T: BUCKET SEAT CHROME STAINLESS END CAPS - SET OF 12	$18

BUCKET SEAT HINGE CAP
4 NEEDED PER CAR

SEAT SUPPORT SPRINGS BUCKET
66-72	IN3104T: SIDE SUPPORT SEAT SPRING 1 BUCKET	$34
68-72	IN3107T: BACK BUCKET SEAT SPRING 1 BUCKET	$84
68-72	IN3108T: BOTTOM AND SIDE SEAT SPRING KIT 1 BUCKET	$89

SEAT TRACKS BUCKET - MANUAL
66-72	IN3110T: SEAT TRACKS BUCKET MANUAL - USED	$CALL

66-72	IN6660Z: SEAT TRACKS BUCKET MANUAL NEW (INCLUDES BOTH TRACKS FOR ONE SEAT) - LH	$99



66-72	IN6661Z: SEAT TRACKS BUCKET MANUAL NEW (INCLUDES BOTH TRACKS FOR ONE SEAT) - RH	$99
66-72	IN10501T: BUCKET SEAT EXTENDERS (MOUNTS BETWEEN FLOOR AND SEAT TRACK AND MOVES SEAT BACK 2 INCHES FOR TALLER PEOPLE - LH ONLY	$79
SEAT MOUNTING BRACKETS - MANUAL

66-72	IN8511Z: BUCKET SEAT MOUNTING BRACKET SET - 1 BUCKET (REPRODUCTION) BRACKET CONVERTS BENCH SEAT CARS TO BUCKETS. 1 KIT IS 2 BRACKETS. WELDS TO FLOOR PAN ON INSIDE BY TRANS HUMP AND YOU RE-USE THE OTHERS FROM BENCH FOR YOUR BUCKETS.	$29

71-72	IN8513Z: BUCKET SEAT MOUNTING BRACKETS (ORIGINAL STYLE) THIS IS AN EXACT COPY KIT TO PUT BUCKET SEATS INTO A CAR, OR IF REPLACING RUSTED FLOORS, THESE ARE A MUST. 1 KIT DOES 2 BUCKETS AND IS 4 PIECES - LOOKS LIKE FACTORY GM.	$49

SEAT TRACKS POWER BUCKET
68-72	IN3115T: POWER BUCKET SEAT TRACK LH ONLY	$CALL

MOUNTING BRACKETS POWER BUCKETS
WELDS TO FLOOR PAN

64-72	IN6680Z: POWER SEAT MOUNTING BRACKET SET LH ONLY	$69

ADJUSTMENT KNOBS BUCKET

67-72	IN3032Z: BLACK BUCKET SEAT ADJUSTMENT KNOB - EA	$5

67-72	IN3033Z: CHROME BUCKET SEAT ADJUSTMENT KNOB - EA	$7

BUMPERS - SEAT BACK
64-72	IN3120T: SEAT BACK BUMPER (ROUND) - PR	$5

64-72	IN2685Z: SEAT BACK BUMPER (OVAL) - PR	$6

SEAT BACK RELEASE BUTTON
MOUNTS ON SEAT BACK

69-72	IN3037Z: CHROME SEAT BACK RELEASE BUTTON - EA	$18

DOOR PANELS FRONT - UNASSEMBLED (PUI)
SPECIFY COLOR WHEN ORDERING. YOU MUST RE-USE YOUR OLD TRIM
72	IN3134T: S & 442 HT UNASSEMBLED FRONT DOOR PANELS (PUI) - PR	$169
72	IN3135T: SUPREME & CONV 442 UNASSEMBLED FRONT DOOR PANELS (PUI) - PR	$169

DOOR PANELS FRONT - ASSEMBLED (PUI)
PANELS COME WITH TRIM INSTALLED IN MOST CASES, AND UPPER REINFORCEMENT WITH FELT
72	IN3143T: FRONT DOOR PANELS S & 442 (PUI ASSEMBLED) - PR	$279
72	IN3144T: FRONT DOOR PANELS SUPREME & CONVERTIBLE 442 (PUI ASSEMBLED) - PR	$279


DOOR PANELS FRONT - UNASSEMBLED (LEGENDARY)
*ALL LEGENDARY DOOR PANELS ARE HAND MADE AND WILL TAKE A MINIMUM OF 8 WEEKS FOR DELIVERY*
YOU MUST RE-USE YOUR OLD TRIM. SPECIFY MANUAL OR POWER
71-72	IN3157T: UNASSEMBLED FRONT DOOR PANELS (LEGENDARY) SUPREME & 442: HARDTOP COUPE & CONVERTIBLE - PR	$229
71-72	IN3158T: UNASSEMBLED FRONT DOOR PANELS (LEGENDARY) CUTLASS HARDTOP COUPE "BENCH STYLE" - PR	$319
72	IN10749T: UNASSEMBLED FRONT DOOR PANELS (LEGENDARY) S & 442: SPORTS COUPE & HARDTOP COUPE - PR	$229

DOOR PANELS FRONT - ASSEMBLED (LEGENDARY)
*ALL LEGENDARY DOOR PANELS ARE HAND MADE AND WILL TAKE A MINIMUM OF 8 WEEKS FOR DELIVERY*
YOU MUST RE-USE YOUR OLD TRIM. SPECIFY MANUAL OR POWER
71-72	IN10750T: ASSEMBLED FRONT DOOR PANELS (LEGENDARY) SUPREME & 442: HARDTOP COUPE & CONVERTIBLE - PR	$319
71-72	IN10751T: ASSEMBLED FRONT DOOR PANELS (LEGENDARY) CUTLASS HARDTOP COUPE (BENCH STYLE) - PR	$449
72	IN10748T: ASSEMBLED FRONT DOOR PANELS (LEGENDARY) S & 442: HARDTOP COUPE - PR	$319
72	IN10756T: ASSEMBLED FRONT DOOR PANELS (LEGENDARY) S & 442: SPORTS COUPE (POST) - PR	$319

REAR QUARTER TRIMS - UNASSEMBLED (PUI)
VINYL WITH CARDBOARD BACKING. NEED TO USE YOUR CARDBOARD TOP RAIL. SPECIFY COLOR WHEN ORDERING
72	IN3185T: S & 442 HARDTOP REAR QUARTER TRIMS - UNASSEMBLED (PUI) - PR	$109
72	IN3186T: SUPREME HARDTOP REAR QUARTER TRIMS - UNASSEMBLED (PUI) - PR	$109
72	IN3187T: SUPREME CONVERTIBLE & 442 REAR QUARTER TRIMS - UNASSEMBLED (PUI) - PR	$109

REAR QUARTER TRIMS - ASSEMBLED (PUI)
THESE COME COMPLETE WITH TOP RAILS & WINDOWFELT
72	IN3216T: REAR QUARTER TRIM PANEL ASSEMBLED PUI (S & 442) - PR	$239
72	IN3217T: REAR QUARTER TRIM PANEL ASSEMBLED PUI (SUPREME CONV) - PR	$219


REAR QUARTER TRIMS - UNASSEMBLED (LEGENDARY)

*ALL LEGENDARY REAR QUARTER TRIMS ARE HAND MADE AND WILL TAKE A MINIMUM OF 8 WEEKS FOR DELIVERY*
71-72	IN3205T: UNASSEMBLED REAR QUARTER TRIMS (LEGENDARY) SUPREME: HARDTOP COUPE - PR	$139
71-72	IN3206T: UNASSEMBLED REAR QUARTER TRIMS (LEGENDARY) SUPREME & 442 CONVERTIBLE - PR	$139
71-72	IN3207T: UNASSEMBLED REAR QUARTER TRIMS (LEGENDARY) CUTLASS HARDTOP COUPE (BENCH STYLE) - PR	$229
72	IN3208T: UNASSEMBLED REAR QUARTER TRIMS (LEGENDARY) S & 442: HARDTOP COUPE - PR	$139

REAR QUARTER TRIMS - ASSEMBLED (LEGENDARY)

*ALL LEGENDARY REAR QUARTER TRIMS ARE HAND MADE AND WILL TAKE A MINIMUM OF 8 WEEKS FOR DELIVERY*
71-72	IN10765T: ASSEMBLED REAR QUARTER TRIMS (LEGENDARY) CUTLASS HARDTOP COUPE (BENCH STYLE) - PR	$329
72	IN10766T: ASSEMBLED REAR QUARTER TRIMS (LEGENDARY) S & 442: HARDTOP COUPE - PR	$269

DOOR PANEL CLIPS
THESE ARE THE CLIPS THAT HOLD THE DOOR PANELS ONTO THE CAR

64-72	IN2304Z: DOOR PANEL CLIP & GROMMET SET	$12

64-72	IN2302Z: PLASTIC DOOR PANEL PLUG - EA	$1

64-72	IN2303Z: METAL DOOR PANEL CLIPS - EA	$0.50

DOOR PANEL WATERSHIELDS
THESE ARE THE PANELS THAT GO BETWEEN THE DOOR PANEL AND THE DOOR SHELL. WHEN ORDERING, SPECIFY COUPE OR CONVERTIBLE
68-72	IN3229T: DOOR PANEL WATERSHIELDS FRONT & REAR - SET	$14

REFLECTORS - DOOR PANEL
MOUNT ON BOTTOM REAR OF DOOR IN CARPETED SECTION. RED WITH CHROME BORDER
70-72	IN4668T: DOOR PANEL REFLECTOR - EA	$29

INSIDE DOOR REMOTE MIRROR ESCUTCHEON

71-77	IN2359Z: INSIDE DOOR REMOTE MIRROR ESCUTCHEON - THIS IS THE TEXTURED CHROME PLATED MIRROR ESCUTCHEON THAT MOUNTS ON THE INSIDE DOOR PANEL. INCLUDES REINFORCEMENT BRACKET, RETAINING CLIP AND SCREWS. REPLACES GM # 1387797	$29

MIRROR BEZEL DOOR PANEL REMOTE
71-88	IN5427T: REMOTE MIRROR DOOR PANEL BEZEL ONLY - EA	$19
71-88	IN5429T: REMOTE MIRROR BEZEL BACKING PLATE	$9


DOOR PULL STRAP END CAP INTERIOR (CHROME)
THESE ARE THE CHROME CAPS THAT ARE USED ON CARS WITH INTERIOR DOOR PULL STRAPS. THEY GO ON THE ENDS OF EACH STRAP - 2 PER DOOR

70-77	IN4722T: DOOR PULL END CAP CHROME - EA	$15

70-77	IN4724T: DOOR PULL END CAPS CHROME - SET OF 4	$55

DOOR LOCK KNOBS

71-87	IN6728Z: DOOR LOCK KNOB (CHROME) - EA	$3

DOOR LOCK FERRULES

68-87	IN6730Z: DOOR LOCK FERRULE - EA	$2

INSIDE DOOR LOCK ROD RETAINING CLIP

68-81	IN2427Z: INSIDE DOOR LOCK RETAINING CLIP (EA) - THIS IS THE CORRECT PLASTIC SLEEVE THAT HOLDS THE DOOR PULL LOCK ROD TO THE INSIDE DOOR FRAME AND ALLOWS THE DOOR LOCK ROD SHAFT TO SWIVEL ON THE BODY OF THE DOOR FRAME. USE TWO PER SIDE AND FOUR PER CAR. THESE ARE COMMONLY BROKEN AND WITHOUT THESE SLEEVES, THE DOOR LOCK PULL ROD WILL NOT FUNCTION CORRECTLY.	$4

ARM REST PADS - FRONT
1973-77 AND 1978-87 ARE AVAILABLE IN BLUE MIST, BURGUNDY, CAMEL, CARDOVAN BROWN, EVERGREEN, FIRETHORN RED, GRAPHITE, LIGHT BUCKSKIN, MOCHA COFFEE, NAPA RED, PALOMINO, PHANTOM WHITE, PORTOLA RED, PRESIDIO GRAY, SADDLE TAN, SANTE FE, SATIN BLACK, SHADOW BLUE, TAUPE, WARM GRAY & WEDGEWOOD BLUE
68-72	IN5016T: FRONT ARM REST PAD 11" (BLACK) - LH	$20
68-72	IN5017T: FRONT ARM REST PAD 11" (BLACK) - RH	$20
68-72	IN5018T: FRONT ARM REST PAD 11" (AQUA) - LH	$20
68-72	IN5019T: FRONT ARM REST PAD 11" (AQUA) - RH	$20
68-72	IN5020T: FRONT ARM REST PAD 11" (LIGHT BLUE) - LH	$20
68-72	IN5021T: FRONT ARM REST PAD 11" (LIGHT BLUE) - RH	$20
68-72	IN5022T: FRONT ARM REST PAD 11" (68 BLUE) - LH	$20
68-72	IN5023T: FRONT ARM REST PAD 11" (68 BLUE) - RH	$20
68-72	IN5024T: FRONT ARM REST PAD 11" (DARK BLUE) - LH	$20
68-72	IN5025T: FRONT ARM REST PAD 11" (DARK BLUE) - RH	$20
68-72	IN5026T: FRONT ARM REST PAD 11" (BRIGHT BLUE) - LH	$20


68-72	IN5027T: FRONT ARM REST PAD 11" (BRIGHT BLUE) - RH	$20
68-72	IN5028T: FRONT ARM REST PAD 11" (GOLD) - LH	$20
68-72	IN5029T: FRONT ARM REST PAD 11" (GOLD) - RH	$20
68-72	IN5030T: FRONT ARM REST PAD 11" (IVY GOLD) - LH	$20
68-72	IN5031T: FRONT ARM REST PAD 11" (IVY GOLD) - RH	$20
68-72	IN5032T: FRONT ARM REST PAD 11" (LIGHT GREEN) - LH	$20
68-72	IN5033T: FRONT ARM REST PAD 11" (LIGHT GREEN) - RH	$20
68-72	IN5034T: FRONT ARM REST PAD 11" (DARK METALLIC GREEN) - LH	$20
68-72	IN5035T: FRONT ARM REST PAD 11" (DARK METALLIC GREEN) - RH	$20
68-72	IN5036T: FRONT ARM REST PAD 11" (JADE GREEN) - LH	$20
68-72	IN5037T: FRONT ARM REST PAD 11" (JADE GREEN) - RH	$20
68-72	IN5038T: FRONT ARM REST PAD 11" (DARK GREEN) - LH	$20
68-72	IN5039T: FRONT ARM REST PAD 11" (DARK GREEN) - RH	$20
68-72	IN5040T: FRONT ARM REST PAD 11" (PARCHMENT) - LH	$20
68-72	IN5041T: FRONT ARM REST PAD 11" (PARCHMENT) - RH	$20
68-72	IN5042T: FRONT ARM REST PAD 11" (PEARL) - LH	$20
68-72	IN5043T: FRONT ARM REST PAD 11" (PEARL) - RH	$20
68-72	IN5044T: FRONT ARM REST PAD 11" (RED) - LH	$20
68-72	IN5045T: FRONT ARM REST PAD 11" (RED) - RH	$20
68-72	IN5046T: FRONT ARM REST PAD 11" (70 RED) - LH	$20
68-72	IN5047T: FRONT ARM REST PAD 11" (70 RED) - RH	$20
68-72	IN5048T: FRONT ARM REST PAD 11" (70 SADDLE) - LH	$20
68-72	IN5049T: FRONT ARM REST PAD 11" (70 SADDLE) - RH	$20
68-72	IN5050T: FRONT ARM REST PAD 11" (DARK SADDLE) - LH	$20
68-72	IN5051T: FRONT ARM REST PAD 11" (DARK SADDLE) - RH	$20
68-72	IN5052T: FRONT ARM REST PAD 11" (SANDALWOOD) - LH	$20
68-72	IN5053T: FRONT ARM REST PAD 11" (SANDALWOOD) - RH	$20
68-72	IN5054T: FRONT ARM REST PAD 11" (TAN) - LH	$20
68-72	IN5055T: FRONT ARM REST PAD 11" (TAN) - RH	$20
68-72	IN5056T: FRONT ARM REST PAD 11" (WHITE) - LH	$20
68-72	IN5057T: FRONT ARM REST PAD 11" (WHITE) - RH	$20


ARM REST BASE FRONT
THESE BASES ARE PLASTIC AND ARE WHAT HOUSE THE ARM RESTS
68-72	IN3254T: ARM REST BASE (BLACK) 11" - LH	$24
68-72	IN3255T: ARM REST BASE (BLACK) 11" - RH	$24
68-72	IN3256T: ARM REST BASE (WHITE) 11" - LH	$24
68-72	IN3257T: ARM REST BASE (WHITE) 11" - RH	$24
68-72	IN3258T: ARM REST BASE (RED) 11" - LH	$24
68-72	IN3259T: ARM REST BASE (RED) 11" - RH	$24
68-72	IN3260T: ARM REST BASE (MEDIUM BLUE) 11" - LH	$24
68-72	IN3261T: ARM REST BASE (MEDIUM BLUE) 11" - RH	$24
68-72	IN3262T: ARM REST BASE (DARK BLUE) 11" - LH	$24
68-72	IN3263T: ARM REST BASE (DARK BLUE) 11" - RH	$24
68-72	IN3264T: ARM REST BASE (DARK GREEN) 11" - LH	$24
68-72	IN3265T: ARM REST BASE (DARK GREEN) 11" - RH	$24

ARM REST BASE REAR

68-72	IN3148Z: REAR ARM PANELS KIT HARDTOP ONLY - PLASTIC	$99

ARM REST BASE SCREW KIT
ENOUGH SCREWS FOR BOTH BASES

64-72	IN2915Z: ARM REST BASE SCREW KIT	$6.95

ARM REST BACKING PLATES CHROME
GOES BEHIND ARM REST AND BASE

69-72	IN3121Z: FRONT ARM REST BACKING PLATE CHROME- PR	$49

ARM REST BASE MOLDING (FRONT)

68-72	IN2757Z: STAINLESS TRIM MOUNTS IN ARM REST - PR	$36

ASH WELL COVERS - CONVERTIBLE
SPECIFY COLOR
64-72	IN3271T: ASH & WELL COVERS - FOR CONVERTIBLE CARS. MATCHING VINYL TRIM BESIDE REAR SEAT. CUT AND SEWN, READY TO INSTALL - 4 PIECE SET	$59

DASH ASH TRAY

70-72	IN10106T: DASH ASH TRAY - FACTORY CORRECT BLACK OXIDE PLATED ON METAL AND PLASTIC SLIDE RAILS ON THE SIDES, WHICH ON USED ASHTRAYS COMMONLY BECOME BRITTLE AND BREAK	$49


ASH TRAY COVER SET
THIS IS THE VINYL THAT COVERS THE METAL REAR ARM RESTS. SPECIFY COLOR
64-72	IN3272T: ASH TRAY COVER 2 PIECE SET (HARDTOP OR COUPE)	$49

CARPET
HEADLIGHT DIMMER SWITCH GROMMET INCLUDED WITH CARPET
68-72	IN3274T: PRESS MOLDED CARPET - 80/20 ORIGINAL LOOP BLEND WITH HEEL PAD, GROMMET AND JUTE BACKING (EXC. SIENNA BROWN)	$109
68-72	IN10778T: PRESS MOLDED CARPET - 80/20 ORIGINAL LOOP BLEND WITH HEEL PAD, GROMMET AND JUTE BACKING (SIENNA BROWN)	$129

RUBBER MOLDED MAT
VINYL FLOOR COVERING FOR CARS THAT DID NOT COME WITH CARPET
68-72	IN3278T: VINYL MOLDED FLOOR COVERING - BLACK ONLY	$119

CARPET UNDERLAYMENT
TAR PAPER OR SOUND DEADENER UNDER CARPET
64-72	IN3279T: CARPET UNDERLAYMENT	$45
64-87	IN4654T: CARPET UNDERLAYMENT WITH HEAT SHIELD (4' X 6')	$45

CARPET GUARD
THIS IS THE PLASTIC PANEL THAT MOUNTS AT THE FIREWALL

68-72	IN5581Z: CARPET GUARD	$23

DOOR SILL PLATES
THESE ARE THE PLATES THAT HOLD DOWN THE CARPET IN THE DOOR JAMB. INCLUDE THE BODY BY FISHER EMBLEM.
68-72	IN3283T: DOOR SILL PLATES (PAIR) - ORIGINAL STYLE CONCOURSE CORRECT FOR YOUR SHOW CAR. THEY HAVE THE ORIGINAL BODY BY FISHER RIVETED TAGS LIKE THE WAY THEY WERE IN THE EARLY 70S BEFORE GM WENT TO A STICKER	$49

DOOR SILL PLATE SCREW KIT
ENOUGH FOR TWO DOOR SILL PLATES
64-87	IN3286T: DOOR SILL PLATE SCREW KIT	$3

FLOOR MATS (RUBBER)
FACTORY RUBBER FLOOR MATS - ORIGINAL STYLE RUBBER LIKE GM USED. OLDSMOBILE IS EMBOSSED IN THE MATS
68-72	IN3288T: RUBBER FLOOR MATS BLACK SET - 4 PIECE SET	$149

FLOOR MATS (CARPETED)
ORDER COLOR TO MATCH YOUR CARPET
64-87	IN3289T: CARPETED FLOOR MATS (NOT EMBROIDERED) - 4 PIECE	$59


68-72	IN3290T: CARPETED FLOOR MATS EMBROIDERED (442 IN SILVER) WITH EMBLEM 4 PIECE SET	$79
64-87	IN3291T: CARPETED FLOOR MATS EMBROIDERED (CUTLASS) 4 PIECE SET	$79
68-87	IN3292T: CARPETED FLOOR MATS EMBROIDERED (H/O) 4 PIECE SET	$79

SEAT BELTS - UNIVERSAL

	IN10710Z: UNIVERSAL CHROME FLIP STYLE 60" LAP SEAT BELTS BLACK (PR) - CHROME FLIP STYLE SEAT BELTS THAT MIMIC THE SEAT BELTS THAT CAME IN 50S AND EARLY 60S CARS. THESE ARE AN INEXPENSIVE WAY OF PUTTING NEW BELTS IN YOUR CAR OR INSTALL SEAT BELTS IN A CAR THAT NEVER HAD FACTORY BELTS. THESE BELTS ARE 60" LONG	$59
	IN10702Z: UNIVERSAL PUSH BUTTON LAP SEAT BELTS BLACK (PR) - PUSH BUTTON STYLE SEAT BELTS THAT FEATURE A BLACK TEXTURED BUCKLE COVER WITH A BRIGHT ORANGE BUTTON THAT SAYS PUSH. THESE ARE AN INEXPENSIVE WAY OF PUTTING NEW BELTS IN YOUR CAR OR INSTALL SEAT BELTS IN A CAR THAT NEVER HAD FACTORY BELT	$59

	IN10720Z: UNIVERSAL PUSH BUTTON DELUXE LAP SEAT BELTS BLACK (PR) - OE STYLE PUSH BUTTON STYLE SEAT BELTS THAT FEATURE A DELUXE STYLE STAINLESS BUCKLE COVER WITH A SILVER STARBURST EMBLEM. THESE MIMIC THE DELUXE STYLE SEAT BELTS FOUND IN MANY 69 AND UP GM VEHICLES, BUT WOULD WORK IN OTHER APPLICATIONS BECAUSE THE EMBLEM IS NOT MAKE SPECIFIC. THESE ARE AN INEXPENSIVE WAY OF PUTTING NEW BELTS IN YOUR CAR OR INSTALL SEAT BELTS IN A CAR THAT NEVER HAD FACTORY BELTS	$59

71-87	IN10722Z: GM DELUXE STYLE BUCKLE LAP SEAT BELTS BLACK - PUSH BUTTON STYLE SEAT BELTS THAT FEATURE A BLACK TEXTURED BUCKLE COVER WITH A BLACK GM MARK OF EXCELLENCE BUTTON THAT MIMIC THE STYLE OF THE 71-UP GM DELUXE SEAT BELTS	$69

SEAT BELTS
REPLACEMENT
CHROME BUCKET SEAT BELTS - EARLY LOOKING FLIP STYLE BUCKLE IS A LAP BELT STYLE AVAILABLE IN SEVERAL COLORS, SOLD PER PERSON - INCLUDE MOUNTING HARDWARE. THEY LOOK A LOT LIKE THE 1964 FLIP STYLE BUCKLES.

	IN3176Z: BLACK SEAT BELT (1 PERSON)	$29

	IN3177Z: RED SEAT BELT (1 PERSON)	$29

	IN3178Z: FLAME RED SEAT BELT (1 PERSON)	$29
	IN3179Z: GREEN SEAT BELT (1 PERSON)	$29
	IN3180Z: DARK BLUE SEAT BELT (1 PERSON)	$29
	IN3181Z: BLUE SEAT BELT (1 PERSON)	$29


	IN3182Z: GRAY SEAT BELT (1 PERSON)	$29

	IN3183Z: TURQUOISE SEAT BELT (1 PERSON)	$29

	IN3184Z: MAROON SEAT BELT (1 PERSON)	$29

	IN3185Z: TAN SEAT BELT (1 PERSON)	$29

	IN3186Z: SILVER SEAT BELT (1 PERSON)	$29
	IN3187Z: BROWN SEAT BELT (1 PERSON)	$29

*CALL FOR AVAILABILITY ON COLORS
1966-1972 STANDARD SEAT BELTS
CALL FOR AVAILABILITY ON COLORS
67-72	IN3315T: STANDARD ORIGINAL RECONDITIONED BLACK PLASTIC BUCKLE WITH GM DECAL WITH COVERED RETRACTORS FRONTS DRIVER & PASSENGER - FRONT NO SHOULDER HARNESS BLACK WEBBING	$250
67-72	IN3316T: STANDARD NEW REPRODUCTION RETRACTOR WITH PLASTIC BUCKLE BLACK WEBBING - LH	$129
68-72	IN3317T: STANDARD NEW REPRODUCTION RETRACTOR WITH PLASTIC BUCKLE BLACK WEBBING - RH	$129
68-72	IN3318T: STANDARD ORIGINAL SHOULDER HARNESS FOR HARDTOPS RECONDITIONED BLACK PLASTIC BUCKLES BLACK WEBBING - EA	$99
68-72	IN3319T: STANDARD ORIGINAL SHOULDER HARNESS FOR CONVERTIBLES BLACK PLASTIC BUCKLES RECONDITIONED - PR	$199
68-72	IN3320T: STANDARD ORIGINAL REAR SEAT BELT BLACK PLASTIC BUCKLE BLACK WEBBING RECONDITIONED ORIGINAL - SOLD PER PERSON	$99

68-72	IN5157T: STANDARD NEW REPRODUCTION REAR SEAT BELT BLACK PLASTIC BUCKLE BLACK WEBBING - SOLD PER PERSON	$99
1968-1972 DELUXE SEAT BELTS
68-72	IN3321T: DELUXE STAINLESS BUCKLE ORIGINAL RECONDITIONED BLACK WEBBING WITH GM EMBLEM WITH COVERED RETRACTORS FRONT DRIVER & PASSENGER NO SHOULDER HARNESS	$300
68-72	IN3322T: DELUXE SHOULDER HARNESS FOR HARDTOPS STAINLESS BUCKLES BLACK WEBBING (RECONDITIONED) - EA	$99

68-72	IN3323T: DELUXE SHOULDER HARNESS FOR CONVERTIBLES STAINLESS BUCKLE BLACK WEBBING (2 PERSON) - PR	$229
OE DELUXE STYLE SEAT BELTS

69-72	IN10694Z: SMALL GM OE DELUXE STYLE LAP SEAT BELTS BLACK (PR) - THESE SEAT BELTS HAVE A GM MARK OF EXCELLENCE IN BLACK WITH A SMALL STAINLESS BUCKLE	$69

ACCESSORY SEAT BELT RETRACTOR
THIS IS A ROLL-UP STYLE SEAT BELT RETRACTOR. WILL ALLOW SEAT BELTS THAT DON'T USE A COVERED RETRACTOR TO ROLL UP THE SEAT BELT. THIS STYLE RETRACTOR IS WHAT GM OFFERED PRIOR TO 1967.
67-72	IN4602T: SEAT BELT RETRACTOR - EA	$29


SEAT BELT RETRACTOR COVERS
NEW SEAT BELT RETRACTOR COVERS TO REPLACE YOUR OLD, DRY ROTTED OR BROKEN COVERS. THEY ARE INJECTION MOLDED LIKE ORIGINAL FACTORY AND COME IN BLACK ABS PLASTIC WITH PROPER TEXTURE AND CODES ON THEM.

68-72	IN3695Z: SEAT BELT RETRACTOR COVERS ROBBINS 6715 (BLACK ONLY) - PR (FIT STANDARD SEAT BELTS. FIT MOST ALL A BODY GM CARS WITH STANDARD SEAT BELTS WITH PLASTIC BUCKLES)	$39

69-72	IN3696Z: SEAT BELT RETRACTOR COVERS RCF-400 (BLACK ONLY) - PR (FIT MOST ALL A BODY GM CARS WITH DELUXE SEAT BELTS)	$39

SEAT BELT RECONDITIONING PARTS
68-72	IN3331T: BUCKLE HEAD BLACK PLASTIC STANDARD BUCKLE WITH BUTTON & EMBLEM GM DECAL - PER PERSON	$22

SEAT BELT RESTORATION PARTS

68-74	IN2653Z: STAINLESS SEAT BELT ANCHOR WITH CLEAR RUBBER 2" LONG	$14

SEAT BELT MOUNTING HARDWARE

67-72	IN9534Z: CADMIUM PLATED SEAT BELT BOLT COARSE THREAD 13/16 USED ON ALL BOLTS THAT ARE 1-1/2" LONG - EA	$3

67-72	IN3596Z: CADMIUM PLATED SEAT BELT BOLT COARSE THREAD 13/16 USED ON ALL BOLTS THAT ARE 1-1/4" LONG - EA	$3

67-72	IN2874Z: CHROME PLATED SEAT BELT BOLT COARSE THREAD 13/16 USED ON ALL BOLTS THAT ARE 1-1/2" LONG - EA	$5

SHOULDER BELT RETAINER & COVER SET
MADE OF HIGH POLISH STAINLESS LIKE ORIGINAL. KIT INCLUDES 4 SEAT BELT RETAINER CLIPS & 4 RETAINER CLIP COVERS

68-72	IN1992Z: SHOULDER BELT RETAINER & COVER SET (8 PIECE SET)	$15

HEADLINERS
HARDTOPS
SPECIFY COLOR AND MATERIAL TYPE (BASKETWEAVE, PERFORATED, PREMIER, STAR, AND SURREY)
69-72	IN4863T: HEADLINER - BASKETWEAVE	$79
69-72	IN4864T: HEADLINER - PERFORATED	$79
69-72	IN4865T: HEADLINER - PREMIER	$79

69-72	IN4866T: HEADLINER - RIBBED	$79
WAGONS
68-72	IN4883T: HEADLINER (WAGON) - BASKETWEAVE WITHOUT SKYLIGHTS	$129
68-72	IN4884T: HEADLINER (WAGON) - TIER GRAIN WITHOUT SKYLIGHTS	$129
70-72	IN4887T: HEADLINER (VISTA CRUISER) - PREMIER NON-PERFORATED WITH SKYLIGHTS	$189
70-72	IN4888T: HEADLINER (VISTA CRUISER) - PERFORATED WITH SKYLIGHTS	$189


HEADLINER WINDLACE
THIS IS THE RUBBER TRIM THAT HOLDS THE HEADLINER UP AROUND THE REAR WINDOW AND ABOVE THE WINDSHIELD
FRONT HEADLINER WINDLACE
68-72	IN5164T: FRONT HEADLINER WINDLACE - BLACK	$39
68-72	IN3359T: FRONT HEADLINER WINDLACE - WHITE	$39
68-72	IN5165T: FRONT HEADLINER WINDLACE - LIGHT BLUE	$39
68-72	IN5166T: FRONT HEADLINER WINDLACE - MEDIUM BLUE	$39
68-72	IN5167T: FRONT HEADLINER WINDLACE - RED	$39
68-72	IN5168T: FRONT HEADLINER WINDLACE - DARK BLUE	$39
68-72	IN5169T: FRONT HEADLINER WINDLACE - BRIGHT BLUE	$39
68-72	IN5170T: FRONT HEADLINER WINDLACE - PARCHMENT	$39
68-72	IN5171T: FRONT HEADLINER WINDLACE - DARK GREEN	$39
68-72	IN5172T: FRONT HEADLINER WINDLACE - LIGHT SADDLE	$39
68-72	IN5173T: FRONT HEADLINER WINDLACE - DARK SADDLE	$39
68-72	IN5174T: FRONT HEADLINER WINDLACE - SANDALWOOD	$39

68-72	IN5175T: FRONT HEADLINER WINDLACE - PEARL	$39
REAR HEADLINER WINDLACE
68-72	IN3361T: REAR HEADLINER WINDLACE - BLACK	$69
68-72	IN5176T: REAR HEADLINER WINDLACE - WHITE	$69
68-72	IN5177T: REAR HEADLINER WINDLACE - LIGHT BLUE	$69
68-72	IN5178T: REAR HEADLINER WINDLACE - MEDIUM BLUE	$69
68-72	IN5179T: REAR HEADLINER WINDLACE - RED	$69
68-72	IN5180T: REAR HEADLINER WINDLACE - DARK BLUE	$69
68-72	IN5181T: REAR HEADLINER WINDLACE - BRIGHT BLUE	$69
68-72	IN5182T: REAR HEADLINER WINDLACE - PARCHMENT	$69
68-72	IN5183T: REAR HEADLINER WINDLACE - DARK GREEN	$69
68-72	IN5184T: REAR HEADLINER WINDLACE - LIGHT SADDLE	$69
68-72	IN5185T: REAR HEADLINER WINDLACE - DARK SADDLE	$69
68-72	IN5186T: REAR HEADLINER WINDLACE - SANDALWOOD	$69
68-72	IN5187T: REAR HEADLINER WINDLACE - PEARL	$69


HEADLINER MOLDINGS
68-72	IN5678T: SIDE HEADLINER WINDLACE MOLDINGS (BLACK) 2 PIECES - NEW	$89
HEADLINER BOW CLIPS

68-72	IN6249Z: HEADLINER BOW CLIP (HOLDS HEADLINER BOWS) - EA	$4.95

68-72	IN6250Z: HEADLINER BOW CLIP (HOLDS HEADLINER BOW AND HAS THE CLIP TO HOLD THE CENTER DOME LAMP HARNESS) - EA	$4.95

EAR MUFF BOARD - BARE
SOLD IN PAIRS
68-72	IN3354T: EAR MUFF BOARDS (BARE) - PR	$18

EAR MUFF BOARD - ASSEMBLED
SPECIFY COLOR AND MATERIAL TYPE - SOLD IN PAIRS
68-72	IN3357T: EAR MUFF BOARDS (ASSEMBLED) - PR	$32

SUNVISORS
71-72	IN8489T: SUNVISORS - S & SUPREME COUPE (PERFORATED) - PR	$89
71-72	IN8490T: SUNVISORS - S & SUPREME COUPE (RIBBED) - PR	$89
71-72	IN8491T: SUNVISORS - S & SUPREME COUPE (PREMIER) - PR	$89
71-72	IN8492T: SUNVISORS - S & SUPREME COUPE (BASKETWEAVE) - PR	$89
68-72	IN8493T: SUNVISORS - CONVERTIBLE (MADRID) - PR	$89

SUNVISOR BRACKETS
HARDTOP

64-72	IN4692Z: SUNVISOR BRACKET (HARDTOP) - EA	$18

CONVERTIBLE TOP LATCH RECEPTICLES 68-72
THESE ARE THE BRUSHED CHROME RECEPTICLES THAT MOUNT AT THE PILLAR OF THE WINDSHIELD, CONVERTIBLE TOP LATCHES TO THEM TO HOLD DOWN THE CONVERTIBLE TOP FRAME. REPLACED YOUR DAMAGED, SCRATCHED ORIGINALS WITH THESE NEW BRUSHED CHROME BEAUTIFUL PLATED RECEPTICLES.

68-72	IN3355Z: CONVERTIBLE SUNVISOR BRACKETS - PR	$89

SUNVISOR VANITY MIRROR

64-72	IN3300Z: SUNVISOR VANITY MIRROR (PIN STYLE)	$32

SUNVISOR BUSHING KIT
ENOUGH FOR BOTH SUNVISORS

64-72	IN2246Z: SUNVISOR BUSHING KIT	$5

PACKAGE TRAYS
THIS PANEL GOES FROM BACK WINDOW TO REAR SEAT SPECIFY YEAR WHEN ORDERING
68-72	IN3376T: STANDARD PACKAGE TRAY (S & 442 MODELS)	$19


68-72	IN3377T: DELUXE PACKAGE TRAY (S & 442 MODELS)	$39
70-72	IN3378T: STANDARD PACKAGE TRAY (SUPREME MODELS)	$19
70-72	IN3379T: DELUXE PACKAGE TRAY (SUPREME MODELS)	$39

PACKAGE TRAY JUTE PADDING
THIS GOES UNDER THE PACKAGE TRAY
68-72	IN5251T: PACKAGE TRAY JUTE INSULATION ("S" & 442)	$8
70-72	IN5252T: PACKAGE TRAY JUTE INSULATION (SUPREME)	$8

PACKAGE TRAY WINDLACE END CAPS
THESE ARE THE PLASTIC CAPS THAT GO AT THE END OF THE REAR WINDOW WINDLACE. THEY GET HELD IN BY ONE PHILLIPS SCREW EACH. THESE COME GRAY PAINT TO MATCH.

68-72	IN3383T: CUTLASS "S" & 442 PACKAGE TRAY WINDLACE END CAP - PR	$39
70-72	IN3384T: CUTLASS SUPREME PACKAGE TRAY WINDLACE END CAP - PR	$CALL

WINDSHIELD PILLAR INTERIOR MOLDINGS
THESE ARE THE PADS THAT GO ON THE FRONT DASH UP TO THE HEADLINER

68-72	IN2836Z: WINDSHIELD INTERIOR PILLAR MOLDING PADS CONVERTIBLE (BLACK) - PR	$59
68-72	IN3386T: WINDSHIELD INTERIOR PILLAR POST COVERS (METAL)	$CALL

INNER UPPER FRONT WINDSHIELD TRIM
68-72	IN3388T: INNER UPPER FRONT WINDSHIELD TRIM HARDTOP & SEDAN - BLACK	$39


WINDLACE
1970-72 DOOR JAMB WINDLACE PINCHES ON THE DOOR JAMB PINCHWELD. IT HAS ROLLED MATERIAL SEWN TO THE WINDLACE AND GOES ON THE DOOR JAMB FROM THE DOOR SILL TO THE QUARTER WINDOW.
70-72	IN5194T: DOOR JAMB MOLDED WINDLACE (BLACK) - PR	$43
70-72	IN5195T: DOOR JAMB MOLDED WINDLACE (WHITE) - PR	$43

WINDLACE END CAPS
THESE CAPS MOUNT ON DOOR JAMB NEXT TO THE QUARTER GLASS

DASH PADS
70-72	IN3405T: DASH PAD	$CALL

DASH OVERLAY
AN INEXPENSIVE WAY OF COVERING YOUR DASH AND GIVING A FACTORY APPEARANCE
70-72	IN10732T: DASH OVERLAY WITH OR WITHOUT A/C (WITH CENTER OPENING)	$139


DASH VIN FRAME PLASTIC
68-72	IN5657T: DASH VIN FRAME PLASTIC (STRAIGHT) - THIS WILL REPLACE YOUR BROKEN OR MISSING PLASTIC VIN FRAME. WHEN YOU ARE REFINISHING YOUR DASH, NINE OUT OF TEN TIMES THIS BRITTLE PLASTIC FRAME BREAKS. COMES BLACK PAINT TO MATCH.	$19
DASH HOUSINGS
70-72	IN3412T: PLASTIC DASH HOUSING	$CALL

ASH TRAY DOOR - FRONT
ASH TRAY DOOR ON DASH

70-72	IN4765T: DASH ASH TRAY DOOR - THIS IS A NEW PLASTIC CENTER DASH ASH TRAY DOOR WITH METAL REINFORCEMENT. IT IS BLACK IN COLOR. YOU CAN NOW REPLACE YOUR BROKEN OR MISSING CENTER DASH ASH TRAY DOOR	$59
70-72	IN4767T: DASH ASH TRAY CLIPS - PR	$6

LOWER DASH ALUMINUM INSERTS 70-72
THESE ARE BRUSHED ALUMINUM INSERTS THAT ARE SILK SCREENED AND DIE STAMPED. MOST INSERTS ARE WORN OUT OR THE BLACK LETTERS ARE WORN OFF AND ALUMINUM IS FADED. FRESHEN UP YOUR INTERIOR WITH THESE NEW PANELS!

70-72	IN3413T: ALUMINUM PANEL FOR AIR CONDITIONING INSERT	$24

70-72	IN3414T: ALUMINUM PANEL FOR AIR CONDITIONING INSERT WITH DEFOG INSERT	$24

70-72	IN3415T: ALUMINUM PANEL FOR HEATER INSERT	$24

70-72	IN3416T: ALUMINUM PANEL FOR TOP SWITCH INSERT	$14

70-72	IN3417T: ALUMINUM PANEL FOR WIPER SWITCH INSERT	$14

HAZARD FLASHER KNOB
67-72	IN9608T: HAZARD FLASHER KNOB (LATER GM STYLE)	$24

CIGARETTE LIGHTER HOUSING
71-72	IN5757T: CIGARETTE LIGHTER HOUSING (2 PIECES)	$25

DASH CHROME BEAD
THIS IS THE DECORATIVE MOLDING THAT GOES ON THE DASH PAD
70-72	IN3418T: DASH BEAD MOLDING WITH CLIPS	$39

DASH BEZEL
THIS IS THE "NEW" DASH FACE BEZEL. COMES CHROME PLATED & DETAILED IN BLACK THE SAME WAY GM DID. MUST ORDER WOODGRAIN SEPARATELY

70-72	IN3419T: CHROME DASH FACE BEZEL AROUND GAUGES	$89

VACUUM PODS
FOR CARS WITH AIR CONDITIONING

68-72	IN5816Z: VACUUM POD (ACTIVATES RH UNDER DASH DOOR)	$39

68-72	IN5817Z: VACUUM POD (ACTIVATES COWL FRESH AIR)	$39


GLOVE BOX
INNER DASH CARDBOARD GLOVEBOX - HAS FACTORY FIT & FINISH
70-72	IN3423T: GLOVE BOX	$19

DASH & GLOVE BOX EMBLEMS
REPLACE YOUR DAMAGED OR MISSING EMBLEMS WITH THESE NEW NICE REPRODUCTIONS
70-72	IN3429T: 442 GLOVE BOX EMBLEM	$24
72	IN3430T: H/O GLOVE BOX PLAQUE & EMBLEM	$89

DASH WOOD GRAIN OVERLAY KITS WITH METAL BACKING
72	IN3443T: DASH WOOD KIT WITH METAL BACKING - COUPE	$139
72	IN3444T: DASH WOOD KIT WITH METAL BACKING - CONVERTIBLE	$139
72	IN3445T: DASH WOOD KIT WITH METAL BACKING - COUPE WITH CRUISE	$139
72	IN3446T: DASH WOOD KIT WITH METAL BACKING - CONVERTIBLE WITH CRUISE	$139
72	IN3447T: DASH WOOD KIT WITH METAL BACKING - COUPE WITH RADIO DELETE	$139
KIT INCLUDES MAIN DASH, INSTRUMENT CLUSTER, GLOVE BOX SOLD IN SETS ONLY WITH METAL BACKING ONLY ON THE MAIN DASH WOODGRAIN

DASH WOOD OVERLAY - VINYL
INSTRUMENT CLUSTER WOODGRAIN

72	IN3450T: INSTRUMENT CLUSTER WOODGRAIN (GAUGES)	$24
MAIN DASH WOODGRAIN

72	IN3453T: MAIN DASH WOODGRAIN (LOWER PART)	$32
GLOVEBOX WOODGRAIN
72	IN3456T: GLOVEBOX WOODGRAIN (ON DOOR)	$19

RALLY PACK - NEW
THIS VERY SOUGHT AFTER OPTION MANUFACTURED BY THE PARTS PLACE IS NOW AVAILABLE. THESE LOOK AND FUNCTION EXACTLY LIKE THE ORIGINAL. WE EMPLOYED NEW TECHNOLOGY DURING THE MANUFACTURING OF THESE UNITS. THE CLOCKS HAVE THE QUARTZ MOVEMENT INSTALLED.
THIS IS A NEW SHOW QUALITY RALLY PACK & TACH SETUP THAT WE AT THE PARTS PLACE HAVE REPRODUCED, BUT THERE IS LIMITED AVAILABILITY! IT TAKES PLACE OF TELL TALE GAUGES. ONE UNIT GOES WHERE THE CLOCK WAS. IT HOUSES A TIC TOCK GAUGE WHICH IS A TACH WITH A CLOCK IN THE MIDDLE. THE OTHER GAUGE GOES WHERE THE FUEL GAUGE IS. THE NEW GAUGE SHOWS FUEL, OIL, AND TEMP. BOTH HOUSINGS ARE MADE OUT OF METAL.
THE CLOCK HAS A QUARTZ MOVEMENT. ALL OTHER GAUGES HAVE TOP OF THE LINE MOVEMENTS THAT ARE VERY ACCURATE. ALL GAUGES ARE NEW AND CALIBRATED; TACH HAS NEW MOVEMENT. GAUGE AND FACE ARE METAL AND SILK SCREENED. RALLY PACK INSTALLATION KIT THAT INCLUDES ALL THE NECESSARY SENDING UNITS, THE TACH HARNESS, AND OIL SENDING UNIT ELBOW IS SOLD SEPARATELY.



70-72	IN3459T: RALLY PACK* - NEW	$429
RALLY PACK INSTALLATION KIT
THIS KIT IS FOR CONVERTING THE WIRE HARNESS TO THE RALLY GAUGE HARNESS. KIT INCLUDES: TACH HARNESS WITH BRAIDED HOUSING, TEMPERATURE SENDING UNIT, OIL PRESSURE SENDING UNIT, ELBOW FOR OIL PRESSURE SENDING UNIT, AND INSTRUCTIONS FOR CONVERTING.
68-72	IN3460T: RALLY PACK INSTALLATION KIT	$109

DASH CLOCKS
FOR CARS WITHOUT RALLY GAUGES. CLOCKS ARE REBUILT WITH NEW QUARTZ MOVEMENT.
70-72	IN3463T: DASH CLOCK (CORE CHARGE $50)	$139
CLOCKS WORK ON AN EXCHANGE BASIS.

DASH CLOCK DELETE
68-72	IN3464T: DASH CLOCK DELETE PLATE - USED ORIGINAL	$25

DASH CLEAR LENS
CLEAR LENS IN FRONT OF FUEL GAUGE, SPEEDO OR CLOCK. MUST DRILL HOLE FOR CLOCK ADJUSTMENT

68-77	IN3465T: DASH LENS CLEAR - EA (USED 2 OR 3 PER CAR)	$9

DASH BEZELS
THESE ARE THE TRIM BEZELS AROUND THE GAUGES - 3 NEEDED PER CAR

SPEEDOMETERS
70-72	IN3469T: SPEEDOMETER	$CALL

SPEEDOMETER GAUGE FACE

70-72	IN5652T: SPEEDOMETER GAUGE FACE FLOOR SHIFT - THIS IS A NEW SPEEDOMETER GAUGE FACE THAT IS DESIGNED FOR CARS WITH FLOOR SHIFT, MANUAL OR AUTOMATIC. YOU CAN NOW TAKE YOUR COLUMN SHIFT SPEEDOMETER AND MAKE IT INTO A FLOOR SHIFT SPEEDOMETER BY REPLACING THE GAUGE FACE. THIS GAUGE FACE IS 100% CORRECT LIKE GM, NEW AND NOT FADED.	$39

SPEEDOMETER CABLES
THESE ARE FACTORY STYLE SPEEDOMETER CABLES, THEY HAVE THE INNER CABLE WITH THE OUTER HOUSING CASING. 64-68 SCREW ONTO THE BACK OF THE SPEEDOMETER, 69 AND UP CLIP ON.
69-72	IN3473T: SPEEDOMETER CABLE WITH HOUSING	$39
SPECIFY WHAT TRANSMISSION WHEN ORDERING

SPEEDOMETER CABLE GROMMET

64-72	IN3414Z: SPEEDOMETER CABLE GROMMET	$5


DEFLECTOR DUCT LOWER
MOUNTS ON THE HEATER BOX AND DEFLECTS THE AIR AROUND THE CONSOLE OR 8-TRACK PLAYER. COMMONLY MISSING OR BROKEN

67-72	IN4296Z: LOWER DEFLECTOR DUCT FOR CARS WITH CONSOLE	$59

AIR DUCT CABLES AND RELATED ITEMS
CABLE, CHROME AND KNOB

68-72	IN3478Z: AIR DUCT CABLE 12" (HAS ROUND LOOP END) - LH	$39

68-72	IN3479Z: AIR DUCT CABLE 14" (HAS "Z" END) - RH	$39

AIR DUCT CABLE KNOBS

68-72	IN3481Z: AIR DUCT CABLE KNOBS CHROME - 4 PIECES	$20

68-72	IN3482Z: AIR DUCT CABLE KNOBS BLACK - 2 PIECES	$10

DEFROSTER, HEATER FRESH AIR & A/C DUCT HOSE
CLOTH STYLE HOSE, NOT CHEAP PLASTIC
	IN3482T: DEFROSTER, FRESH AIR OR A/C DUCT HOSE (1-1/2" DIA) 3' STICK	$20
	IN3483T: DEFROSTER, FRESH AIR OR A/C DUCT HOSE (1-3/4" DIA) 3' STICK	$20
	IN3484T: DEFROSTER, FRESH AIR OR A/C DUCT HOSE (2" DIA) 3' STICK	$20
	IN3485T: DEFROSTER, FRESH AIR OR A/C DUCT HOSE (2-1/2" DIA) 3' STICK	$20
	IN3486T: DEFROSTER, FRESH AIR OR A/C DUCT HOSE (2-3/4" DIA) 3' STICK	$25
	IN3487T: DEFROSTER, FRESH AIR OR A/C DUCT HOSE (3" DIA) 3' STICK	$25
	IN3488T: DEFROSTER, FRESH AIR OR A/C DUCT HOSE (3-1/4" DIA) 3' STICK	$25
	IN3489T: DEFROSTER, FRESH AIR OR A/C DUCT HOSE (3-1/2" DIA) 3' STICK	$25
	IN3490T: DEFROSTER, FRESH AIR OR A/C DUCT HOSE (3-3/4" DIA) 3' STICK	$27
	IN3491T: DEFROSTER, FRESH AIR OR A/C DUCT HOSE (4" DIA) 3' STICK	$30

KICK PANELS
MOUNTS ON THE SIDE OF THE FIREWALL GOES FROM CARPET UP TO DASH
68-72	IN3498T: KICK PANEL (BLACK) WITH A/C - PR	$79
68-72	IN3499T: KICK PANELS WITHOUT A/C (2 VENT HANDLE DESIGN - INCLUDES GRILLES, PULL HANDLES & CABLES) BLACK PAINT TO MATCH - PR	$179
ALL A/C KICK PANELS WILL WORK WITH CARS WITHOUT A/C, BUT WILL NOT HAVE VENTS OR CABLES. WE ALSO CARRY A COMPLETE LINE OF USED ORIGINALS

KICK PANEL INSULATION
68-72	IN3501T: KICK PANEL INSULATION SET	$10

KICK PANEL CABLE CLIP
REPLACES THE RETAINER CLIP WHERE THE VENT OPERATING CABLE ATTACHES TO THE KICK PANEL
68-81	IN4618T: KICK PANEL CABLE CLIP - EA	$1.95


FIREWALL PADS
INSULATION THAT MOUNTS ON THE FIREWALL - INCLUDES CLIPS

68-72	IN6422Z: FIREWALL PAD WITH AIR CONDITIONING - CORRECT CONCOURSE FIREWALL PADS. THIS PAD FEATURES CORRECT OUTER CARDBOARD/NEOPRENE SHELL WITH JUTE BACKING, MOUNTING CLIPS ARE INCLUDED	$39

68-72	IN6421Z: FIREWALL PAD WITHOUT AIR CONDITIONING - INSTALLS LIKE ORIGINAL. MOUNTING HOLES ARE PRE-PUNCHED IN THE ORIGINAL LOCATIONS FOR SIMPLE INSTALLATION. PLASTIC "CHRISTMAS TREE" STYLE MOUNTING CLIPS ARE INCLUDED	$39

FIREWALL PAD RUBBER PLUG

64-77	IN3946Z: FACTORY RUBBER FIREWALL INSULATOR PAD PLUG - HAS THE GM NUMBER 3868790 ON THE HEAD AND IS 100% CORRECT. ANYONE THAT HAS EVER TRIED PUTTING A FIREWALL PAD ON WITH THE GENERIC PLASTIC CLIPS THEY GIVE YOU FIND IT IS ALMOST IMPOSSIBLE TO INSTALL. THAT'S WHY WE MADE THE CORRECT INSULATED RUBBER CLIP THAT WILL FLEX AND STRETCH TO ALLOW YOU TO INSTALL EASY AND KEEP THE ORIGINAL LOOK 100%. MOST CARS USE SEVEN OF THESE.	$1.75

FIREWALL PAD CLIPS
64-72	IN4967T: FIREWALL PAD CLIP - EA	$0.60

FIREWALL PLASTIC PLUG FILL
68-72	IN5658T: FIREWALL PLASTIC PLUG FILL - THIS PLUG WAS USED ON CARS WITH TURBO 400 OR MANUAL TRANSMISSION. IT GOES BELOW THE THROTTLE CABLE HOLE. ALL FIREWALLS HAVE THE HOLE. GM MADE THE PLUG TO FILL THE HOLE WHEN CARS DID NOT USE A KICK DOWN CABLE. THIS LITTLE PLASTIC PLUG IS COMMONLY MISSING. PERFECT FOR YOUR CONCOURS RESTORATION.	$10

FIREWALL GROMMET
	IN5431T: FIREWALL GROMMET (1-5/16" WITH 1/4" HOLE)	$2

DASH INSULATION KIT
SOUND DEADENER UNDER THE DASH IN THE INTERIOR OF YOUR CAR
68-72	IN3506T: DIE CUT DASH INSULATION - KIT	$14

REARVIEW MIRRORS - INTERIOR

69-72	IN3522Z: REARVIEW MIRROR DAY/NIGHT	$69

REARVIEW MIRROR BRACKETS - INTERIOR
INSIDE REARVIEW MIRROR ATTACHES TO THIS


COUPE REARVIEW MIRROR BRACKETS


68-72	IN2828Z: COUPE REARVIEW MIRROR BRACKET	$24
CONVERTIBLE REARVIEW MIRROR BRACKETS

68-72	IN3512Z: CONVERTIBLE REARVIEW MIRROR BRACKET	$26

REARVIEW MIRROR SCREW - INTERIOR
SECURES REARVIEW MIRROR TO THE BRACKET

64-87	IN4853Z: REARVIEW MIRROR SCREW	$2

COAT HOOKS
67-72	IN3520T: COAT HOOK (GM REPLACEMENT) - EA	$5

67-72	IN1635Z: COAT HOOKS (FACTORY RIBBED STYLE) - PR	$12

ASH TRAYS - REAR QUARTER TRIM

68-72	IN8320Z: REAR ASH TRAY PLAIN CHROME (LARGE 4" X 2 1/2") - EA	$45

68-72	IN8321Z: REAR ASH TRAY PLAIN CHROME (SMALL 3" X 2") - EA	$49

68-72	IN8325Z: REAR ASH TRAY COVER ASSEMBLY CORRECT RIBBED STYLE - DOES NOT INCLUDE INSERT (LARGE 4" X 2 1/2") - EA	$36

68-72	IN8326Z: REAR ASH TRAY INSERT ONLY (LARGE 4" X 2 1/2") - EA	$12

68-72	IN8328Z: REAR ASH TRAY COVER ASSEMBLY CORRECT RIBBED STYLE - DOES NOT INCLUDE INSERT (SMALL 3" X 2") - EA	$32

68-72	IN8329Z: REAR ASH TRAY INSERT ONLY (SMALL 3" X 2") - EA	$12

WINDOW CRANKS - INTERIOR

67-87	IN4522Z: INTERIOR WINDOW CRANK (BLACK KNOB) - EA	$6

67-87	IN4525Z: INTERIOR WINDOW CRANK (CLEAR KNOB) - EA	$6
*INCORRECT REPLACEMENT FOR 1967 ONLY

WINDOW CRANK HARDWARE - INTERIOR

64-87	IN4851Z: WASHER BEHIND INTERIOR WINDOW CRANK - EA	$2

64-87	IN4852Z: SPRING BEHIND INTERIOR WINDOW CRANK - EA	$2

DOOR HANDLES - INTERIOR
65-72	IN3534T: INSIDE DOOR HANDLE (SEDAN ONLY) - LH OR RH	$10

68-72	IN5028Z: INSIDE DOOR HANDLE - LH	$18

68-72	IN5029Z: INSIDE DOOR HANDLE - RH	$18

DOOR HANDLE REMOTE
MECHANISM THAT ALLOWS DOOR TO OPEN FROM INSIDE. WILL NOT WORK WITH BACKING PLATES.
68-72	IN10676T: DOOR HANDLE REMOTE ASSEMBLY - LH	$19
68-72	IN10677T: DOOR HANDLE REMOTE ASSEMBLY - RH	$19



68-72	IN3501Z: DOOR HANDLE REMOTE ASSEMBLY PAIR	$35
VENT WINDOW HANDLES & COMPONENTS

68-72	IN0153Z: 68 ALL & 68-72 SEDAN VENT WINDOW HANDLE WITH BLACK KNOB - EA	$15

68-72	IN0155Z: 68 ALL & 68-72 SEDAN VENT WINDOW HANDLE WITH CLEAR KNOB - EA	$15

PEDAL PADS & TRIMS
BRAKE PEDAL PAD

64-72	IN3542T: BRAKE PEDAL PAD AUTOMATIC (WORKS ON CARS WITH DRUM OR DISC BRAKES - PAD DOES NOT SAY DISC BRAKES ON IT)	$10
EMERGENCY BRAKE PEDAL PAD

64-72	IN3546T: EMERGENCY BRAKE PEDAL PAD	$5
CLUTCH & BRAKE PEDAL PADS

64-72	IN3549T: CLUTCH OR BRAKE PAD - EA	$6
ACCELERATOR PEDAL

68-75	IN3551T: ACCELERATOR PEDAL PAD (NEW GAS PEDAL - FACTORY LENGTH OF 6 1/2" LONG UNLIKE REPLACEMENTS THAT OTHERS ARE SELLING)	$16
PEDAL COMPONENTS
64-72	IN4869T: TRIM STAINLESS - BRAKE PEDAL - EA	$10

68-72	IN2578Z: GAS PEDAL TENSION SPRING	$5

68-72	IN3027Z: ACCELERATOR ROD PIN HOLDER	$3

PEDAL TRIM
64-72	IN3557T: PEDAL TRIM STAINLESS BRAKE OR CLUTCH (MANUAL TRANS) - EA	$5
64-72	IN4768T: PEDAL TRIM STAINLESS BRAKE FOR AUTOMATIC	$12
68-72	IN3558T: PEDAL TRIM STAINLESS EMERGENCY BRAKE	$5

TURN SIGNAL LEVER
WE NOW OFFER THE CORRECT TURN SIGNAL LEVERS MADE LIKE FACTORY ORIGINAL GM

71-77	IN3561T: TURN SIGNAL LEVER CHROME WITH BLACK END	$29

TILT LEVER
WE NOW OFFER THE CORRECT TILT LEVERS MADE LIKE FACTORY ORIGINAL GM

71-77	IN3563T: TILT LEVER (CHROME WITH BLACK END)	$29

BRAKE RELEASE HANDLE
NEW BLACK HANDLE WITH BRAKE WRITTEN IN WHITE

68-72	IN8337Z: EMERGENCY BRAKE HANDLE - EA	$10

EMERGENCY BRAKE ASSEMBLY
THIS IS THE PEDAL ASSEMBLY THAT MOUNTS BY THE KICK PANEL

68-72	IN4601T: EMERGENCY BRAKE ASSEMBLY	$89


DOME LAMP LENS & BEZEL

64-72	IN6388Z: SAIL PANEL LAMP LENS ROUND 2" SMOOTH PATTERN - THIS LENS HAS THE SMOOTH, FLAT PATTERN, AND IS OFF WHITE WITH 3 MOUNTING TABS. USED IN CARS THAT HAVE HEADLINER SAIL PANEL LIGHTS	$5

64-72	IN6389Z: SAIL PANEL LAMP LENS ROUND 2" WITH CIRCULAR RINGS - THIS LENS HAS THE CIRCULAR PATTERN, AND IS OFF WHITE WITH 4 MOUNTING TABS. USED IN CARS THAT HAVE HEADLINER SAIL PANEL LIGHTS	$10
68-88	IN10510T: DOME LAMP LENS HOUSING 4" ROUND - PLASTIC CHROME PLATED INTERIOR DOME LAMP LENS HOUSING. THIS IS THE HOUSING THAT MOUNTS IN THE INTERIOR OF THE CAR AT THE CENTER OF THE HEADLINER. THE OUTSIDE DIAMETER OF THIS HOUSING IS 4". FITS CARS WITH 3" ROUND DOME LAMP LENS	$12

69-72	IN10509Z: SAIL PANEL DOME LAMP HOUSING (3 1/4") - PLASTIC CHROME PLATED INTERIOR SAIL PANEL DOME LAMP LENS HOUSING. THIS IS THE HOUSING THAT MOUNTS ON THE SIDE OF THE HEADLINER SAIL PANEL. THE OUTSIDE DIAMETER IS 3 1/4" AND ACCEPTS THE LENS WITH 4 TAB MOUNT THAT IS 2" DIAMETER. REPLACES GM # 8732783. TWO USED PER CAR	$15

69-77	IN2506Z: DOME LAMP LENS - 2-7/8" ROUND, FROSTED WITH STARBURST	$5

69-77	IN2504Z: DOME LAMP LENS BEZEL BASE (ROUND)	$12
69-72	IN5704T: COURTESY LAMP LENS ROUND WITH RINGS MOUNTS IN SAIL PANEL (2 REQUIRED PER CAR) - EA	$6

CONVERTIBLE COURTESY LAMP LENS
THESE LENSES & HOUSINGS FIT IN THE REAR ARM REST ON CONVERTIBLE CARS

64-72	IN2555Z: CONVERTIBLE COURTESY LENS CONVERTIBLE (RECTANGULAR) - EA	$5
64-72	IN3573T: CONVERTIBLE COURTESY LENS BEZEL & HOUSING - EA	$29

COURTESY LAMP BRACKET
COURTESY LIGHT BRACKET MOUNTS UNDER THE DASH AND THE LIGHT BULB SOCKET SNAPS INTO IT. FITS ALL 68-78 CARS AND WILL WORK ON 64-67 BUT WILL NOT USE THE LENS.

68-78	IN4932Z: COURTESY LAMP BRACKET	$8

2.0 CONSOLE & RELATED PARTS


CONSOLE AUTOMATIC
70-72	CP1533T: AUTOMATIC CONSOLE	$CALL

CONSOLE MANUAL
70-72	CP1538T: MANUAL CONSOLE - COMPLETE	$CALL

CONSOLE DUALGATE
70-72	CP1541T: DUALGATE CONSOLE	$CALL

CONSOLE MOUNT BRACKETS

70-72	CP1546T: CUTLASS/442 AUTO AND MANUAL CONSOLE MOUNTING BRACKETS - REPRODUCTION	$25

CONSOLE 4-SPEED ADAPTER KIT

70-72	CP1547T: 4-SPEED ADAPTER KIT WILL MAKE ANY AUTO CONSOLE A 4-SPEED INCLUDES SHIFT BOOT, CHROME ORNAMENT FOR BOOT & BLACK ADAPTER	$149

CONSOLE INSERTS FOR AUTOMATIC TRANS
MADE OF CHROME PLASTIC - THIS IS THE PLASTIC PIECE THAT HOUSES YOUR (PRNDSL) LENS AND WOODGRAIN
70-72	CP1548T: PLASTIC CONSOLE INSERT FOR AUTOMATIC TRANS (DOES NOT INCLUDE WOODGRAIN)	$89

CONSOLE INSERTS FOR 4-SPEED & DUALGATE
PLASTIC PIECE THAT GOES FULL LENGTH OF CONSOLE - MUST BE CUT DOWN FOR HURST SHIFTER OR 4-SPEED. DOES NOT INCLUDE WOODGRAIN

70-72	CP1549T: CONSOLE INSERT (4-SPEED & DUALGATE)	$89

CONSOLE LENS

67-72	CP1551T: AUTOMATIC CONSOLE INDICATOR LENS (PRNDSL)	$29

70-72	CP1553T: AUTOMATIC DUALGATE CONSOLE INDICATOR LENS (PRNDSL)	$29
DUALGATE LAMP HOUSING FOR INDICATOR LENS

70-72	CP1555T: HOUSING LAMP LENS INDICATOR FOR DUALGATE SHIFTER - THIS IS THE LIGHT HOUSING THAT MOUNTS ON THE DUAL GATE SHIFTER. THE SOCKET AND LIGHT BULB MOUNT INTO IT. THIS PIECE IS METAL, UNLIKE THE PLASTIC ONE SOME ARE SELLING AS A REPLACEMENT PART.	$19

SHIFTER CABLE AUTO TRANSMISSION
THESE ARE THE FACTORY REPLACEMENT SHIFTER CABLES



69-72	CP1558T: SHIFTER CABLE WITH STANDARD AUTOMATIC TURBO 350 OR 400	$49

70-72	CP1559T: SHIFTER CABLE WITH DUALGATE SHIFTER TURBO 350 OR 400 (30" EYELET TO EYELET)	$59

TRANSMISSION CABLE PIN
PIN MOUNTS ON THE SHIFTER BRACKET FOR CARS THAT USE A SHIFTER CABLE. ONE SIDE HAS THREADS AND SQUARED OFF AND THE OTHER SIDE IS ROUND AND ACCEPTS THE EYELET OF THE SHIFTER CABLE.

67-87	CP8452Z: TRANSMISSION CABLE SELECTOR PIN KIT	$10

SHIFT CABLE CLIP

68-72	CP5347Z: TRANSMISSION CABLE BRACKET CLIP (HOLDS CABLE ON BRACKET)	$2

CABLE SUPPORT BRACKET
TRANSMISSION SHIFT CABLE SUPPORT BRACKET THAT MOUNTS ON BOTTOM OF TRANSMISSION PAN.

69-77	CP1561T: TURBO 350 TRANSMISSION CABLE BRACKET (HOLDS CABLE ON TRANSMISSION)	$19

69-77	CP8494T: TURBO 400 TRANSMISSION CABLE BRACKET (HOLDS CABLE ON TRANSMISSION)	$19

CABLE SHIFTER BRACKET
TRANSMISSION GEAR SELECTOR LEVER. MOUNTS ON SIDE OF TRANSMISSION.
69-77	CP4770T: TRANSMISSION GEAR SELECTOR LEVER- CHANGES SPEED ON TRANSMISSION	$19

SHIFT BOOTS & COMPONENTS
70-72	CP1568T: 4-SPEED SHIFT BOOT FOR CONSOLE (MOUNTS TO CONSOLE) FITS INTO COLLAR ON CONSOLE & IS MOLDED TO ACCEPT THE SHIFT ORNAMENT	$41

70-72	CP1569T: SHIFT BOOT WITH OR WITHOUT CONSOLE 4-SPEED LOWER BOOT (ALL) BOOT IS USED WITH OR W/O CONSOLE & MOUNTS TO FLOOR. IF YOUR CAR HAS A CONSOLE, YOU NEED 2 BOOTS, ONE THAT MOUNTS TO FLOOR & ONE THAT MOUNTS TO THE CONSOLE. IF YOU DON'T HAVE A CONSOLE, THIS IS THE ONLY BOOT YOU WILL NEED.	$39
70-72	CP1570T: SHIFT BOOT CHROME ORNAMENT MANUAL TRANS (MOUNTS ON VERY TOP OF SHIFT BOOT FOR CARS WITH CONSOLE)	$12

CONSOLE SHIFTER SEALS
THIS IS THE PLASTIC SHIFT SLIDER
70-72	CP1573T: PLASTIC SHIFT SEAL - AUTOMATIC TRANS	$20

CONSOLE LIDS
NEW BLACK PLASTIC LID - MUST REUSE YOUR HINGE & BRACKET



70-72	CP1574T: CONSOLE LID BLACK - PAINT TO MATCH	$49
CONSOLE BOXES
THIS IS THE 2 PIECE BOX THAT MOUNTS IN THE CONSOLE SHELL & HAS THE HOLE FOR THE LIGHT

70-72	CP1575T: 2 PIECE CONSOLE INNER BOX	$59

SHIFT KNOB MANUAL & AUTO TRANSMISSION
64-87	CP1578T: SHIFT BALL MANUAL BLACK WITH 4-SPEED SHIFT PATTERN 5/16" THREAD	$18
64-87	CP1579T: SHIFT BALL MANUAL WHITE WITH 4-SPEED SHIFT PATTERN 5/16" THREAD	$18
64-87	CP1580T: SHIFT BALL MANUAL BLACK WITH 4-SPEED SHIFT PATTERN 3/8" THREAD	$18
64-87	CP1581T: SHIFT BALL MANUAL WHITE WITH 4-SPEED SHIFT PATTERN 3/8" THREAD	$18
64-87	CP4735T: SHIFT BALL MANUAL BLACK LARGE 2" DIAMETER WITH 4-SPEED SHIFT PATTERN 3/8" THREAD	$22
64-87	CP4988T: SHIFT BALL MANUAL WHITE LARGE 2" DIAMETER WITH 4-SPEED SHIFT PATTERN 3/8" THREAD	$22

67-72	CP5237T: SHIFT BALL WALNUT AUTOMATIC	$39
68-79	CP5238T: HURST DUAL GATE SHIFT KNOB AUTO BLACK	$19
64-87	CP5239T: HURST SHIFT BALL MANUAL WHITE WITH 4-SPEED SHIFT PATTERN WITH HURST LOGO 3/8" THREAD	$25
64-87	CP5240T: HURST T-HANDLE MANUAL BRUSHED FINISH WITH 4-SPEED SHIFT PATTERN 3/8" THREAD	$35
64-87	CP5241T: HURST T-HANDLE MANUAL OR AUTO BRUSHED FINISH WITH HURST LOGO 3/8" THREAD	$30
64-87	CP5242T: HURST T-HANDLE MANUAL OR AUTO POLISHED FINISH WITH HURST LOGO 3/8" THREAD	$30

SHIFTER 4-SPEED HURST REPLACEMENT
70-72	CP1584T: SHIFTER 4-SPEED HURST REPLACEMENT FOR CARS WITHOUT CONSOLE (SHIFTER HAS FLAT CHROME BAR)	$279

70-72	CP5387T: SHIFTER 4-SPEED HURST REPLACEMENT FOR CARS WITH CONSOLE (SHIFTER HAS FLAT CHROME BAR) - DESIGNED FOR ALL CARS WITH A CONSOLE. IT HAS THE DOUBLE BEND ON THE STICK TO CLEAR THE CONSOLE SHELL. THIS CAN ALSO WORK FOR CARS WITHOUT CONSOLE. SHIFT STICK HAS THE "H" STAMPED ON IT. THE FINE THREAD SHIFTER KNOB MUST BE ORDERED SEPARATELY	$329

SHIFTER 4-SPEED HURST ORIGINAL
70-72	CP5390T: SHIFTER 4-SPEED HURST ORIGINAL FOR CARS WITH CONSOLE (HAS CORRECT DOUBLE BEND HANDLE)	$CALL
70-72	CP5391T: SHIFTER 4-SPEED HURST ORIGINAL FOR CARS WITHOUT CONSOLE	$CALL


HURST DUALGATE MOUNTING BRACKET

70-72	CP1586T: HURST DUALGATE SHIFTER MOUNTING INCLUDES 3 BRACKETS ALSO INCLUDES BRACKET FOR 70 TO MOUNT NEUTRAL SAFETY SWITCH	$79
MANUAL TRANS HURST SHIFTER MOUNTING BRACKET
THIS IS THE CORRECT HURST SHIFTER MOUNTING BRACKET NOW MADE BY THE PARTS PLACE. IT IS MADE EXACTLY LIKE THE ORIGINAL OUT OF STAMPED STEEL AND GOLD ANODIZED PLATING, 100% CORRECT FOR YOUR CONCOURS RESTORATION. THIS BRACKET MOUNTS TO THE TAIL HOUSING OF THE TRANSMISSION. THIS ELIMINATES THE PROBLEM OF SHIFTER ALIGNMENT. WORKS ON MUNCIE / M20 / M21 / M22 / BORG WARNER / T-10 TRANSMISSIONS

68-72	CP10763Z: MANUAL TRANSMISSION HURST SHIFTER MOUNTING BRACKET	$39

HURST DUALGATE SHIFTER

70-79	CP1587T: HURST DUALGATE SHIFTER WITH KNOB	$399

HURST DUALGATE SHIFTER DUST COVER
68-72	CP1588T: HURST DUALGATE SHIFTER DUST COVER	$18

HURST DUALGATE SHIFTER KIT
KIT INCLUDES HURST DUALGATE SHIFTER, DUALGATE TOP PLATE WITH WOODGRAIN, SHIFTER LENS, DUALGATE BRACKET SET (MOUNTS SHIFTER TO FLOOR), BLACK SHIFT KNOB, DUALGATE SHIFTER CABLE. SHIFTER IS ASSEMBLED AND READY TO INSTALL IN YOUR ORIGINAL AUTOMATIC OR DUALGATE CONSOLE.

72	CP1591T: HURST DUALGATE SHIFTER KIT	$599

HURST 4-SPEED SHIFTER ROD & TAB SET 1970-72
WE NOW OFFER THE CORRECT 70-72 HURST SHIFTER ROD & TAB SETUP WITH METAL BUSHINGS AND CLIP KIT. THESE ARE THE HEAVY DUTY SHIFT RODS 1/2" DIAMETER LIKE GM MADE FOR THE HURST SHIFTER. WE HAVE REPRODUCED THIS ROD IN THE CORRECT GOLD ANODIZED FINISH. SHIFTER TABS ARE DIE STAMPED, NOT LASER CUT. THEY FIT VERY TIGHTLY, PRESS FIT TO TRANS TO ELIMINATE ANY SHIFTER SLOP. THEY ARE STAMPED WITH FO FT OUT 1 2 3 4. YOU CAN NOW GET THE HEAVY DUTY ROD - NO SLOPPY SHIFTING. WE ALSO MAKE THE CORRECT SHIFT MOUNTING BRACKET FOR THE SAME APPLICATIONS.

70-72	CP9068Z: HURST SHIFTER ROD & TAB SET (3 RODS, 3 PIECE TAB SET, METAL BUSHINGS & CLIP KIT)	$229
70-72	CP5718T: HURST SHIFTER TAB SET (3 PIECE) - DIE STAMPED, NOT LASER CUT. THEY FIT VERY TIGHTLY, PRESS FIT TO TRANS TO ELIMINATE ANY SHIFTER SLOP. THEY ARE STAMPED WITH FO FT OUT 1 2 3 4.	$39
70-72	CP10482T: HURST SHIFTER INSTALL KIT (INCLUDES BUSHINGS AND CLIP KIT) FOR ROD & TAB SET	$19


HURST DUALGATE TOP PLATE
THIS DUALGATE CHROME TOP PLATE MOUNTS ON TOP OF THE DUALGATE SHIFTER AND INCLUDES WOODGRAIN, EMBLEM AND SHIFT LENS

72	CP1595T: AUTOMATIC HURST DUAL TOP PLATE (COMPLETE) COMES PREASSEMBLED; INCLUDES TOP PLATE, INDICATOR LENS, EMBLEM AND THE CORRECT CHERRY WOOD INSERT	$99

CONSOLE WOOD OVERLAY - VINYL
72	CP1599T: CONSOLE WOODGRAIN OVERLAY - AUTOMATIC TRANS WITHOUT DUALGATE SHIFTER	$29
72	CP1602T: CONSOLE WOODGRAIN OVERLAY - AUTOMATIC TRANS WITH DUALGATE SHIFTER	$29
72	CP1605T: CONSOLE WOODGRAIN OVERLAY - WITH 4-SPEED SHIFTER	$29

CONSOLE WOODGRAIN OVERLAY WITH METAL BACKING
72	CP1610T: AUTOMATIC CONSOLE OVERLAY WITH METAL BACKING	$59
72	CP1613T: DUALGATE CONSOLE OVERLAY WITH METAL BACKING	$59
72	CP1616T: 4-SPEED CONSOLE OVERLAY WITH METAL BACKING	$59

3.0 STEERING & RELATED PARTS


STEERING WHEEL BARE
70-77	ST3721T: 4 SPOKE RALLY STEERING WHEEL - BLACK WITH BRUSHED SPOKES	$229

70-77	ST3722T: 4 SPOKE RALLY STEERING WHEEL - BLACK WITH CHROME SPOKES	$229

STEERING WHEEL KIT
KITS INCLUDE STEERING WHEEL, HARDWARE, HORN CONTACT, CAP ASSEMBLY WITH EMBLEM & HUB. HORN CONTACT PLUNGER KIT IS SOLD SEPARATELY AND IS NEEDED ON SOME APPLICATIONS.
70-77	ST3726T: 4-SPOKE RALLY STEERING WHEEL KIT - BLACK WITH BRUSHED SPOKES	$329

70-77	ST3727T: 4-SPOKE RALLY STEERING WHEEL KIT - BLACK WITH CHROME SPOKES	$329

STEERING WHEEL HUBS

70-75	ST3730T: SPORT STEERING WHEEL HUB - FITS CUTLASS RALLY 4 SPOKE STEERING WHEELS	$49

STEERING WHEEL CAPS

67-77	ST3731T: SPORT STEERING WHEEL CAP ASSEMBLY INCLUDES CAP WITH SATIN OUTER EDGE AND BLACK RUBBER TRIM WITH BLACK, RED & CHROME ROCKET EMBLEM (FITS 67-69 3-SPOKE WOOD WHEELS & 70-77 4-SPOKE RALLY WHEELS)	$69

67-77	ST3732T: SPORT STEERING WHEEL CAP INSERT (PLASTIC EMBLEM - MOUNTS IN CAP)	$39

HORN CONTACTS
SPRING LOADED RETAINER THAT HOLDS CAP ONTO WHEEL

67-77	ST3291Z: SPORT OR WOOD WHEEL HORN CONTACT	$19

67-77	ST3734Z: HORN CONTACT ASSEMBLY (THIS IS THE PLUNGER THAT GOES INTO CANCEL CAM & ALLOWS HORN CONTACT TO WORK WITH SPORT OR WOOD WHEEL)	$10

TILT STEERING COLUMNS
PLEASE SPECIFY AUTOMATIC OR 4-SPEED TRANSMISSION
70-72	ST3738T: TILT STEERING COLUMN (FLOOR SHIFT) REBUILT	$389
70-72	ST5197T: TILT STEERING COLUMN (COLUMN SHIFT) REBUILT	$389

STEERING COLUMN CLAMP PLATE
68-72	ST10724T: STEERING COLUMN CLAMP PLATE - 2 PC	$45

NON-TILT STEERING COLUMNS
PLEASE SPECIFY AUTOMATIC OR 4-SPEED TRANSMISSION


70-72	ST3744T: NON-TILT STEERING COLUMN (FLOOR SHIFT) REBUILT	$309
70-72	ST5415T: NON-TILT STEERING COLUMN (COLUMN SHIFT) REBUILT	$309

SWIVEL AND ROD ASSEMBLY
69-72	ST9737T: SWIVEL & ROD ASSEMBLY - THIS IS THE LINKAGE THAT GOES FROM THE STEERING COLUMN ARM ON THE BOTTOM OF THE STEERING COLUMN IN THE ENGINE COMPARTMENT. THE SIDE ROD ATTACHES TO THE ARM THAT ATTACHES TO THE SHAFT ASSEMBLY THAT PIVOTS ON FRAME. THE PARTS INCLUDED WITH THIS KIT ARE: ROD, SWIVEL ADJUSTMENT WITH NUT. THE ONLY WAY THE STEERING COLUMN LOCKS THE TRANSMISSION AND ALLOWS THE REVERSE LIGHTS TO FUNCTION. IT IS USED FOR CARS WITH FLOOR SHIFT AUTOMATIC OR MANUAL, OR COLUMN SHIFT AUTOMATIC.	$89
69-72	ST9738T: PLASTIC INSULATOR - MOUNTS ON FRAME BRACKET - WORKS IN CONJUNCTION WITH SWIVEL & ROD ASSEMBLY	$3
69-72	ST9739T: SPRING - PUTS PRESSURE ON SWIVEL TO FRAME - WORKS IN CONJUNCTION WITH SWIVEL & ROD ASSEMBLY	$3

STEERING COLUMN SEALS
THIS IS THE LOWER SEAL AT THE FIREWALL

68-72	ST3748Z: STEERING COLUMN SPONGE SEAL - EA	$5

68-77	ST5578Z: STEERING COLUMN INTERMEDIATE SHAFT SEAL - THIS REPLACES THE RUBBER SEAL THAT GOES BETWEEN THE STEERING SHAFT AND SWIVEL ON INTERMEDIATE SHAFT. THE GM REPLACEMENT # IS 7802919.	$29

STEERING COLUMN ARM BUSHING SET
68-87	ST5759T: STEERING COLUMN ARM BUSHING SET (RUBBER BUSHING WITH PLASTIC INSERT)	$6

STEERING COLUMN SUPPORT
68-72	ST9733T: STEERING COLUMN SUPPORT (BOLTS TO BOTTOM OF THE DASH)	$69

STEERING GEAR BOXES

64-87	ST8552Z: MANUAL STEERING GEAR BOX - NEW NOT REBUILT	$279

64-87	ST2864Z: QUICK RATIO POWER STEERING GEAR BOX	$249



	ST2875Z: STEERING GEAR BOX BOLT 7/16" X 4 5/8" RSC - EA (THIS BOLT USED ON MOST ALL GM CARS TO MOUNT THE STEERING GEAR BOX. IT IS 4 5/8" LONG WITH A POINTED TIP. CAN BE USED ON OTHER APPLICATIONS IF A 4 5/8" BOLT IS REQUIRED. BLACK OXIDE.	$5
STEERING GEAR BOX POWER HOSE CLIP RETAINER
THIS IS THE METAL BRACKET THAT GETS BOLTED ONTO THE STEERING GEAR BOX. IT KEEPS THE HIGH PRESSURE HOSE AWAY FROM THE FAN BELTS. THIS IS COMMONLY MISSING ON MOST CARS.

64-77	ST5462Z: POWER STEERING GEAR BOX STEERING HOSE CLIP RETAINER	$6

PITMAN ARM

66-72	ST5646Z: PITMAN ARM (POWER)	$85

66-72	ST5648Z: PITMAN ARM (MANUAL)	$85

POWER STEERING HOSE - HIGH PRESSURE
THESE ARE FACTORY STYLE REPRODUCTION HOSES - VERY NICE QUALITY PIECES
71-72	ST3756T: HIGH PRESSURE POWER STEERING LINE	$39

POWER STEERING HOSE - RETURN LINE
KIT INCLUDES THE TUBE THAT MOUNTS IN THE STEERING BOX, RUBBER HOSE & CLAMP
64-72	ST3757T: RETURN POWER STEERING LINE KIT	$19

POWER STEERING HOSE KITS - OEM
THESE ARE EXACT REPRODUCTION POWER STEERING HOSES. INCLUDES HIGH PRESSURE SUPPLY HOSE AND LOW PRESSURE RETURN HOSE. THESE HOSES RUN FROM THE POWER STEERING UNIT TO THE GEAR BOX MOUNTED ON THE FRAME. THESE HOSES DRY ROT AND WEAR OUT OVER TIME SO REPLACE YOUR HOSES TODAY WITH THIS CONCOURSE SET.
71-72	ST5707T: POWER STEERING HOSE SET (INCLUDES HIGH PRESSURE SUPPLY HOSE & LOW PRESSURE RETURN HOSE)	$59

POWER STEERING PUMP AND RESERVOIR
71-72	ST3761T: POWER STEERING PUMP AND RESERVOIR	$109

STEERING COLUMN COUPLERS

64-87	ST6694C: POWER STEERING COUPLER	$59

64-87	ST6695C: MANUAL STEERING COUPLER	$69

64-87	ST10727Z: STEERING COLUMN COUPLER HARDWARE KIT (INCLUDES 12 POINT FINE THREAD BOLT FOR CLAMP, 2 NUTS & 2 LOCK WASHERS FOR STUDS)	$6

4.0 BODY PANELS


FENDERS (STEEL)
70-72	BP1065T: FENDER NOS GM - LH	$795
70-72	BP1066T: FENDER NOS GM - RH	$CALL

70-72	BP1067T: FENDER REPRODUCTION - LH	$379

70-72	BP4788T: FENDER REPRODUCTION - RH	$379

FENDERS (FIBERGLASS)
70-72	BP5080T: FIBERGLASS FENDERS - PR	$579

FENDER PATCH PANELS
LOWER PART OF THE FRONT FENDER
70-72	BP1076T: LOWER FENDER PATCH PANEL - LH	$69
70-72	BP1077T: LOWER FENDER PATCH PANEL - RH	$69

FENDER SUPPORT BARS - FRONT OF FENDER
THESE ARE THE SUPPORTS THAT GO FROM BOTTOM OF FENDER TO FRAME OF CAR. THEY HAVE A RUBBER FLAP WITH SUPPORT ROD ATTACHED TO IT. MOST CARS RUBBER IS ROTTED OUT AND BAR IS RUSTED

69-72	BP1069T: FENDER SUPPORT ROD - LH	$39

69-72	BP1070T: FENDER SUPPORT ROD - RH	$39

FENDER TO BODY BRACE - REAR INSIDE OF FENDER
THESE ARE THE RODS THAT GO BEHIND THE FENDER AND COWL. CURVED ROUND BAR WITH NUT WELDED ON ONE END. THESE WERE USED ON HIGH HORSEPOWER CUTLASS SUCH AS 442 / W30 / W31 / RALLYE 350.

70-72	BP1071T: FENDER TO BODY BRACE - PR	$59

FENDER EXTENSION GASKETS
THESE GASKETS GO BETWEEN THE FENDER & THE EXTENSION

INNER SPLASH A-FRAME SEALS
68-72	BP1085T: INNER FENDER A-FRAME SPLASH SEALS (INCLUDES STAPLES) - PR	$18

INNER FENDER WELLS (PLASTIC)
WE HERE AT THE PARTS PLACE HAVE MADE OUR INNER FENDER WELLS FOR THE 70-72 CUTLASS W-30 MODELS IN RED AND ALSO IN BLACK FOR THE STANDARD MODEL CUTLASS. WE ARE VERY PROUD OF OUR NEW FENDER WELLS FOR FIT, FINISH AND COLOR. THESE ARE NEW REPRODUCTIONS AND ARE NOTHING LIKE THE ONES THAT WERE PREVIOUSLY AVAILABLE ON THE MARKET WITH THE INCORRECT COLOR AND CONTOUR. THESE COME WITH ALL OF THE HOLES DRILLED EXCEPT THE OUTER ONES BY THE OUTER FENDER. BY NOT DRILLING THAT HOLE, YOU ARE ABLE TO LINE THESE UP & INSTALL THEM CORRECTLY.
RED INNER FENDER WELLS




70-72	BP1088T: RED INNER FENDER LINERS TOP QUALITY WITH CORRECT COLOR, FIT & FINISH - PR	$449
BLACK INNER FENDER WELLS

70-72	BP1089T: BLACK INNER FENDER LINERS TOP QUALITY WITH CORRECT COLOR, FIT & FINISH - LH	$159

70-72	BP1091T: BLACK INNER FENDER LINERS TOP QUALITY WITH CORRECT COLOR, FIT & FINISH - RH	$159

INNER FENDER WELLS (FIBERGLASS)
70-72	BP5082T: FIBERGLASS INNER FENDERS - PR	$279

INNER FENDER WELL CLAMP
THESE ARE THE PLASTIC HOLD DOWN CLAMPS THAT HOLD THE WIRE TO THE INNER FENDER WELL. 1 1/4" INSIDE WIDTH PLASTIC U-SHAPED CLAMP WITH A PEG AT EACH END THAT PUSHES INTO HOLES ON THE INNER FENDER WELL.
67-72	BP1092T: INNER FENDER WELL WIRE CLAMP - EA	$3.50

67-72	BP10132T: INNER FENDER WELL WIRE CLAMP - SET OF 3	$10

DRIP RAIL PILLAR SUPPORTS
MOUNTS TO THE WINDSHIELD PILLAR POST, THIS IS WHAT THE DRIP RAIL PILLAR CHROME ATTACHES TO
68-72	BP9636T: DRIP RAIL PILLAR SUPPORTS (COUPE) - PR	$49

DOOR SKINS
70-72	BP10690T: DOOR SKIN (REPRODUCTION) - LH	$199
70-72	BP1093T: DOOR SKIN (NOS) - LH	$CALL
70-72	BP10691T: DOOR SKIN (REPRODUCTION) - RH	$199
70-72	BP1094T: DOOR SKIN (NOS) - RH	$CALL

DOOR SHELLS (STEEL)
MUST SHIP TRUCK FREIGHT
64-87	BP1095T: DOOR SHELLS	$CALL
WE CARRY A COMPLETE LINE OF USED RUST-FREE DOORS - CALL FOR AVAILABILITY

DOOR SHELLS (FIBERGLASS)
70-72	BP1097T: FIBERGLASS DOORS - PR	$639

DOOR DRAIN FLAPS
66-72	BP9727T: DOOR DRAIN FLAPS (4 NEEDED PER CAR) - EA	$3

DOOR HINGES (UPPER)
68-72	BP1101T: UPPER DOOR HINGE NEW - LH	$55
68-72	BP4791T: UPPER DOOR HINGE NEW - RH	$55

DOOR HINGES (LOWER)
68-72	BP1106T: LOWER DOOR HINGE NEW - LH	$59
68-72	BP4796T: LOWER DOOR HINGE NEW - RH	$59


DOOR HINGE PIN & BUSHING KIT
64-77	BP1109T: DOOR HINGE PIN AND BUSHING KIT - INCLUDES 4 PINS, 8 STANDARD BUSHINGS & 2 OVERSIZED BUSHINGS (ENOUGH FOR ALL 4 HINGES)	$19

DOOR HINGE DETENT KIT
KIT INCLUDES BOLTS AND ROLLERS
68-72	BP1111T: DOOR HINGE DETENT KIT (LOWER HINGES) - PR	$22

DOOR HINGE SCREW SETS
68-72	BP1114T: HINGE BOLT SET (UPPER) - SET OF 12 BOLTS	$14
68-72	BP1115T: HINGE BOLT SET (LOWER) - SET OF 12 BOLTS	$14

DOOR LATCH LOCK ASSEMBLIES (INNER LOCK)
MOUNTS ON THE SIDE OF THE DOOR AND ALLOWS THE DOOR TO LOCK TO THE BODY
70-72	BP1120T: DOOR LATCH LOCK ASSEMBLY - LH	$119
70-72	BP4804T: DOOR LATCH LOCK ASSEMBLY - RH	$119

DOOR LATCH ATTACHING MACHINE SCREWS
64-72	BP1123T: DOOR LATCH ATTACHING MACHINE SCREWS (USES 3 PER LATCH) - EA	$1

DOOR LOCK STRIKER
MOUNTS ON THE DOOR JAMB AND IS THE CORRECT ROLLER STYLE
64-87	BP1124T: DOOR LOCK STRIKER - EA	$12

DOOR STRIKER PLASTIC WASHER

64-87	BP8522Z: DOOR STRIKER PLASTIC WASHER (PAIR) - CORRECT PLASTIC WASHER THAT GOES BEHIND THE DOOR STRIKER. GM INSTALLED THIS PLASTIC WASHER BEHIND THE STRIKER TO ALLOW YOU TO ADJUST THE STRIKER WITHOUT MARRING THE PAINT. HAS THE CORRECT HOLE WITH FOUR L SHAPED RELIEFS	$3

DOOR JAMB VENTS
MOUNTS IN DOOR JAMB ON QUARTER
70-72	BP1126T: DOOR JAMB VENT - EA	$22

HOOD LOUVERS
REPLACE YOUR PITTED CHROME LOUVERS WITH THESE NEW REPRODUCTION PARTS
71-72	BP1129T: HOOD LOUVERS - S & 442	$CALL

HOODS - STEEL
71-72	BP1137T: HOOD - S & 442	$CALL
71-72	BP1138T: HOOD - STANDARD	$CALL
WE CARRY A COMPLETE LINE OF USED HOODS - CALL FOR AVAILABILITY


HOODS - FIBERGLASS
71-72	BP5091T: FIBERGLASS STOCK FLAT HOOD - PIN ON	$319
71-72	BP5092T: FIBERGLASS STOCK FLAT HOOD - BOLT ON	$459
71-72	BP5093T: FIBERGLASS W-25 442 RAM AIR HOOD - PIN ON	$379

RAM AIR HOOD - STEEL FRAME
71-72	BP1153T: W25 RAM AIR STEEL FRAME HOOD - COMES FIBERGLASS WITH STEEL FRAME AND SCREEN UNDERNEATH	$CALL

RAM AIR HOOD - FIBERGLASS FRAME
USES ORIGINAL HOOD HINGES WITH LIGHTWEIGHT SPRINGS AND FACTORY HOOD TWIST PINS. THIS HOOD FEATURES FIBERGLASS UPPER TOP PANEL, FIBERGLASS AIR BOX WITH FIBERGLASS FRAME. (SOLD SEPARATELY, WE HAVE A RAM AIR HOOD KIT WHICH INCLUDES HOOD, TWIST PINS WITH STAINLESS ESCUTCHEONS, PIN RETAINERS, CORE SUPPORT LOCKING BRACKETS & LIGHTWEIGHT HOOD SPRINGS).

71-72	BP5094T: FIBERGLASS W-25 442 RAM AIR HOOD - BOLT ON	$589
WE HERE AT THE PARTS PLACE HAVE NOW REPRODUCED A RAM AIR HOOD FOR 1971-72 CUTLASS / 442 / W30 / AND HURST OLDS MODELS. UNLIKE WHAT WAS ON THE MARKET BEFORE, WE HAVE REPRODUCED A MORE CORRECT LOOKING AND FITTING HOOD. IT USES ORIGINAL HOOD HINGES WITH LIGHTWEIGHT SPRINGS AND FACTORY HOOD TWIST PINS. THIS HOOD FEATURES THE CORRECT LOOKING FIBERGLASS UPPER TOP PANEL, CORRECT LOOKING FIBERGLASS AIR BOX WITH FACTORY LOOKING FIBERGLASS FRAME. (SOLD SEPARATELY, WE HAVE A RAM AIR HOOD KIT WHICH INCLUDES HOOD, TWIST PINS WITH STAINLESS ESCUTCHEONS, PIN RETAINERS, CORE SUPPORT LOCKING BRACKETS & LIGHTWEIGHT HOOD SPRINGS).

RAM AIR HOOD INSTALLATION KIT
69-72	BP5687T: KIT INCLUDES 2 PINS, 2 SCUFF PLATES, 2 RETAINER BRACKETS THAT MOUNT UNDER THE HOOD, A CORE SUPPORT BRACKET AND HARDWARE	$129

RAM AIR HOOD HOLD DOWN PARTS
69-72	BP1158T: HOOD PIN CHROME TWISTS REPRODUCTION (INCLUDES STAINLESS STEEL SCUFF PLATES THAT MOUNT UNDERNEATH THE TWIST PINS) - PR	$59
69-72	BP5698T: HOOD PIN CHROME TWISTS ORIGINAL GM (INCLUDES STAINLESS STEEL SCUFF PLATES THAT MOUNT UNDERNEATH THE TWIST PINS) - PR	$89
69-72	BP1159T: HOOD PIN BRACKETS (MOUNTS ON CORE SUPPORT) - PR	$59
69-72	BP1160T: HOOD PIN RETAINER (HOLDS PIN ON HOOD) - EA	$6


RAM AIR HOOD KITS
ADD A RAM AIR HOOD TO YOUR CUTLASS TO GIVE YOUR CAR THAT CUSTOM 442 LOOK. THESE KITS THAT THE PARTS PLACE PUTS TOGETHER WILL SAVE YOU A FEW BUCKS
71-72	BP1155T: RAM AIR HOOD KIT (INCLUDES FIBERGLASS ONLY RAM AIR HOOD, FACTORY CHROME TWIST PINS WITH STAINLESS ESCUTCHEONS, PIN RETAINERS, CORE SUPPORT LOCKING BRACKETS, & LIGHTWEIGHT HOOD SPRINGS)	$699

RAM AIR HOOD KIT WITH A KICK (SPOILER WING)
TAKE OUR RAM AIR HOOD KIT AND ADD ONE OF OUR OWN FACTORY REAR SPOILERS AT A DISCOUNT PRICE
71-72	BP1157T: RAM AIR HOOD KIT WITH A KICK (INCLUDES FIBERGLASS ONLY RAM AIR HOOD, FACTORY CHROME TWIST PINS WITH STAINLESS ESCUTCHEONS, PIN RETAINERS, CORE SUPPORT LOCKING BRACKETS, LIGHTWEIGHT HOOD SPRINGS & REAR SPOILER)	$899

RAM AIR HOOD KIT WITH FUNCTIONAL AIR CLEANER
71-72	BP8527T: RAM AIR HOOD KIT WITH FUNCTIONAL AIR CLEANER FOR 350 ENGINE (INCLUDES FIBERGLASS ONLY RAM AIR HOOD, FACTORY CHROME TWIST PINS WITH STAINLESS ESCUTCHEONS, PIN RETAINERS, CORE SUPPORT LOCKING BRACKETS, LIGHTWEIGHT HOOD SPRINGS, OAI AIR CLEANER ASSEMBLY THAT INCLUDES UPPER PLASTIC PAN, LOWER METAL AIR CLEANER BASE, FLAPPER DOOR, VACUUM MOTOR, FOAM SEAL, METAL LID AND HOLD DOWN KIT)	$1179
71-72	BP8528T: RAM AIR HOOD KIT WITH FUNCTIONAL AIR CLEANER FOR 455 ENGINE (INCLUDES FIBERGLASS ONLY RAM AIR HOOD, FACTORY CHROME TWIST PINS WITH STAINLESS ESCUTCHEONS, PIN RETAINERS, CORE SUPPORT LOCKING BRACKETS, LIGHTWEIGHT HOOD SPRINGS, OAI AIR CLEANER ASSEMBLY THAT INCLUDES UPPER PLASTIC PAN, LOWER METAL AIR CLEANER BASE, FLAPPER DOOR, VACUUM MOTOR, FOAM SEAL, METAL LID AND HOLD DOWN KIT)	$1179

W30 & W31 APPEARANCE PACKAGE KIT
ALWAYS WANTED A W30 OR W31? THIS KIT CAN MAKE YOUR CUTLASS OR 442 A CLONE OF THE W30 OR W31 PACKAGE THAT OLDSMOBILE OFFERED.
71-72	BP1163T: W30 455 APPEARANCE PACKAGE KIT (INCLUDES FIBERGLASS RAM AIR HOOD, HOLD DOWN KIT, FACTORY REAR SPOILER WING, RED FRONT INNER FENDER WELLS, W30 FENDER EMBLEMS & W30 PAINT STENCIL KIT FOR SIDES AND HOOD OF CAR)	$1489


71-72	BP1164T: W31 350 APPEARANCE PACKAGE KIT (INCLUDES FIBERGLASS RAM AIR HOOD, HOOD HOLD DOWN KIT, FACTORY REAR SPOILER WING, BLACK FRONT INNER FENDER WELLS, W31 FENDER EMBLEMS & W31 PAINT STENCIL KIT FOR SIDES AND HOOD OF CAR)	$1439
HOOD SCREEN - RAM AIR
SCREEN THAT MOUNTS UNDER THE HOOD ON RAM AIR CARS
70-72	BP1150T: HOOD SCREEN - RAM AIR	$39

HOOD HINGES

69-72	BP1167T: HOOD HINGE NEW - LH	$69

69-72	BP4808T: HOOD HINGE NEW - RH	$69

HOOD HINGE SPRINGS

64-77	BP1170Z: LIGHTWEIGHT SPRINGS FOR FIBERGLASS HOODS - PR	$39

69-72	BP1173T: HOOD HINGE SPRING - EA	$14

HOOD ADJUSTMENT BUMPERS

64-77	BP10130T: HOOD ADJUSTMENT BUMPERS (PAIR) - FACTORY STYLE PAIR OF HOOD ADJUSTMENT BUMPERS. THESE ARE INSTALLED ON THE CORE SUPPORT AND ARE USED TO ADJUST THE HOOD EDGE TO BUMPER. THESE ARE SOLD IN A PAIR FOR A NON RAM AIR HOOD	$7

70-72	BP10131T: HOOD ADJUSTMENT BUMPERS (SET OF 3) - FACTORY STYLE SET OF THREE HOOD ADJUSTMENT BUMPERS. THESE ARE INSTALLED ON THE CORE SUPPORT AND ARE USED TO ADJUST THE HOOD EDGE TO BUMPER. THESE ARE SOLD IN A SET OF 3 FOR THE RAM AIR W-25 HOOD	$10

HOOD RELEASE HANDLE
THIS IS THE HANDLE THAT OPENS THE HOOD
70-72	BP1179T: HOOD RELEASE HANDLE UNDER BUMPER	$29

HOOD LATCH WITH INSIDE RELEASE
ADD THIS RARE OPTION TO YOUR CUTLASS, 442, SUPREME WITH OR WITHOUT RAM AIR HOODS. THIS ASSEMBLY MOUNTS ON CORE SUPPORT.

70-72	BP1180T: INSIDE HOOD RELEASE CABLE & HANDLE KIT (THIS IS THE BLACK HOUSING THAT MOUNTS UNDERNEATH THE DASH WITH A CHROME HANDLE AND A CABLE THAT GOES OUT TO THE HOOD LATCH ON THE CORE SUPPORT - YOU MUST HAVE THE LATCH ASSEMBLY DESIGNED TO ACCEPT THE CABLE)	$69
70-72	BP1181T: HOOD LATCH ASSEMBLY (MOUNTS ON CORE SUPPORT AND IS DESIGNED TO ACCEPT THE INSIDE HOOD RELEASE CABLE)	$69
70-72	BP1182T: INTERIOR HOOD RELEASE LATCH ASSEMBLY T-44 OPTION (INCLUDES A HOOD RELEASE CABLE AND HANDLE ALONG WITH THE LATCH)	$119

CORE SUPPORTS
71-72	BP1189T: CORE SUPPORT	$CALL


QUARTER PANELS
80% QUARTER PANELS GO FROM THE DOOR JAMB TO THE REAR BUMPER AND FROM THE BOTTOM OF THE ROCKER UP TO THE QUARTER WINDOW AND ACROSS. THEY DO NOT INCLUDE THE DOOR JAMB OR SAIL PANEL AREA.
70-72	BP1195T: QUARTER PANEL CUTLASS "S" AND 442 HARDTOP & SEDAN 80% - LH	$199
70-72	BP1196T: QUARTER PANEL CUTLASS "S" AND 442 HARDTOP & SEDAN 80% - RH	$199
70-72	BP1197T: QUARTER PANEL CUTLASS SUPREME HARDTOP & CONVERTIBLE 80% - LH	$199
70-72	BP1198T: QUARTER PANEL CUTLASS SUPREME HARDTOP & CONVERTIBLE 80% - RH	$199
70-72	BP1199T: QUARTER PANEL CUTLASS CONVERTIBLE FULL FACTORY REPRODUCTION - LH	$499
70-72	BP1200T: QUARTER PANEL CUTLASS CONVERTIBLE FULL FACTORY REPRODUCTION - RH	$499
70-72	BP1201T: QUARTER PANEL CONVERTIBLE NOS - LH	$CALL
70-72	BP1202T: QUARTER PANEL CONVERTIBLE NOS - RH	$995
70-72	BP1203T: QUARTER PANEL CONVERTIBLE NOS - PR	$CALL
* RUST REPAIR USE ONLY

QUARTER PANEL EXTENSION
THIS IS THE POT METAL PART THAT BOLTS ON TO THE REAR EDGE OF THE QUARTER PANEL
70-72	BP1208T: QUARTER EXTENSION SUPREME & CONVERTIBLE	$CALL

QUARTER PANEL EXTENSION GASKET
70-72	BP1209T: QUARTER PANEL EXTENSION GASKET - PR	$12

OUTER REAR WHEEL HOUSING
LIP FROM QUARTER PANEL TO INNER WHEEL HOUSING
70-72	BP1213T: OUTER REAR WHEEL HOUSING (HARDTOP) - LH	$95
70-72	BP4814T: OUTER REAR WHEEL HOUSING (HARDTOP) - RH	$95
70-72	BP1214T: OUTER REAR WHEEL HOUSING (CONVERTIBLE) - LH	$105
70-72	BP4815T: OUTER REAR WHEEL HOUSING (CONVERTIBLE) - RH	$105

INNER REAR WHEEL HOUSINGS
FRONT LIP OUTER TO TRUNK FLOOR. THESE PANELS ARE MADE FOR HARDTOPS - MUST MODIFY FOR CONVERTIBLE
68-72	BP1216T: INNER REAR WHEEL HOUSING - LH	$115
68-72	BP4817T: INNER REAR WHEEL HOUSING - RH	$115
68-72	BP1217T: INNER REAR WHEEL HOUSING PATCH - LH	$55
68-72	BP4818T: INNER REAR WHEEL HOUSING PATCH - RH	$55


ROCKER PANELS - OUTER
OUTER PANEL BELOW DOOR
68-72	BP1220T: ROCKER PANEL OUTER (OEM STYLE) - LH	$89
68-72	BP4821T: ROCKER PANEL OUTER (OEM STYLE) - RH	$89
68-72	BP1221T: ROCKER PANEL (NOS GM) - LH	$CALL
68-72	BP1222T: ROCKER PANEL (NOS GM) - RH	$CALL

ROCKER PANELS - INNER
68-72	BP5448T: INNER ROCKER PANEL - LH	$59
68-72	BP5449T: INNER ROCKER PANEL - RH	$59

REAR ROCKER PANEL DRAIN RUBBER FLAPS
KEEPS DEBRIS OUT OF THE ROCKER DRAIN HOLE
	BP5417T: REAR ROCKER PANEL DRAIN RUBBER FLAPS - PR	$5

TRUNK FLOOR SECTIONS
SIDES
68-72	BP1228T: TRUNK FLOOR SECTION - LH	$69

68-72	BP1229T: TRUNK FLOOR SECTION - RH	$69
CENTER SECTIONS
68-72	BP1233T: CENTER TRUNK FLOOR SECTION	$60

GAS TANK BRACES
MOUNTS ON THE TRUNK FLOOR
68-72	BP1236T: GAS TANK BRACES - EA	$39

BODY BRACES
BRACES ON THE TRUNK FLOOR
68-72	BP1239T: BODY BRACE - LH	$39
68-72	BP4825T: BODY BRACE - RH	$39

SPARE TIRE CLAMP
THIS IS THE U-SHAPED STAMPED STEEL PIECE THAT WELDS TO THE FLOOR THAT THE J-BOLT & WING NUT CLIP TO
64-87	BP5683T: SPARE TIRE CLAMP	$6

TRUNK FLOOR KITS
INCLUDES BOTH LH & RH TRUNK SIDES, CENTER TRUNK SECTION, 2 BODY BRACES & 2 GAS TANK BRACES
68-72	BP1242T: TRUNK FLOOR KIT - 7 PIECES	$299

TRUNK FLOORS - ONE PIECE
68-72	BP4872T: FULL ONE PIECE TRUNK FLOOR PAN (INCLUDES BRACES AND BRACKETS ALREADY WELDED IN.)	$459
68-72	BP1243T: ONE LARGE CENTER TRUNK FLOOR SECTION (SIZE 47" X 34")	$95
68-72	BP1244T: LARGE CENTER TRUNK FLOOR SECTION (SIZE 56" X 34" MUST GO TRUCK FREIGHT)	$120

TRUNK FILLER EXTENSIONS (DROP OFFS)
THESE PIECES EXTEND FROM THE TRUNK FLOOR TO THE BOTTOM OF THE QUARTER PANEL ON THE SIDES OF THE TRUNK



70-72	BP1249T: TRUNK FILLER EXTENSION PANEL - LH	$69

70-72	BP4877T: TRUNK FILLER EXTENSION PANEL - RH	$69

TRUNK LIDS - STEEL

70-72	BP1256T: TRUNK LID (STEEL) - CUTLASS "S" & 442 HARDTOP - NEW*	$329

70-72	BP1257T: TRUNK LID (STEEL) - CONVERTIBLE & 4-DOOR - NEW*	$329

70-72	BP1258T: TRUNK LID (STEEL) - SUPREME HARDTOP - NEW*	$329
*THIS IS A NEW DECK LID REPRODUCED FOR THE PARTS PLACE. FITS ALL 70-72 CUTLASS "S" AND 442 - WILL NOT FIT SUPREME. SIZE IS 62 1/4" X 31 1/4"

TRUNK LID HINGES
INCLUDES HINGES AND MOUNTING BRACKETS FOR TORSION RODS

68-72	BP10116Z: TRUNK LID HINGES COUPE ONLY - PAIR	$159

TRUNK LIDS - FIBERGLASS
70-72	BP5121T: FIBERGLASS TRUNK LID (CUTLASS CONVERTIBLE OR SUPREME) - PIN ON	$189
70-72	BP5122T: FIBERGLASS TRUNK LID (CUTLASS CONVERTIBLE OR SUPREME) - BOLT ON	$339
70-72	BP5123T: FIBERGLASS TRUNK LID ("S" HARDTOP) - PIN ON	$189
70-72	BP5124T: FIBERGLASS TRUNK LID ("S" HARDTOP) - BOLT ON	$339

TRUNK LID SPOILERS
OUR 68-72 REAR WING IS THE BEST ON THE MARKET MADE FROM ORIGINAL FACTORY PARTS TO GIVE IT THE MOST AUTHENTIC REPRODUCTION AT A FAIR MARKET PRICE

68-72	BP1266T: REAR WING 3 PIECE DESIGN (W35) INCLUDES HARDWARE	$229

DECKLID FILLER PANEL (CONVERTIBLE)
THIS IS THE PANEL THAT GOES BETWEEN THE CONVERTIBLE REAR WINDOW AND TRUNKLID. GETS PAINTED THE COLOR OF THE CAR.
70-72	BP5538T: DECKLID FILLER PANEL (CONVERTIBLE)	$79

REAR WINDOW TO TRUNK PANEL HT ONLY
70-72	BP1270T: DECK LID FILLER PANEL SUPREME ONLY	$89

UPPER DASH REPAIR PANEL
THIS PANEL MOUNTS UNDER THE WINDSHIELD
68-72	BP5542T: UPPER DASH REPAIR PANEL	$79

FLOOR TO FIREWALL EXTENSIONS
REPLACE RUSTED FIREWALL SECTIONS. THESE EXTEND FROM THE FRONT FLOOR UP THE FIREWALL PEDAL AREA
64-72	BP1273T: FLOOR TO FIREWALL EXTENSION - LH	$69


64-72	BP1274T: FLOOR TO FIREWALL EXTENSION - RH	$69
FIREWALL - COMPLETE
THIS FIREWALL FITS MOST 68-72 GM A-BODY CARS. IT IS A COMPLETE UNIT THAT GOES TO ALL THE FACTORY SEAMS FROM THE FACTORY FLOOR PAN TO THE UPPER COWL. HAS THE TORQUE BOXES FOR THE BODY MOUNTS.
68-72	BP8546T: FIREWALL WITHOUT AIR CONDITIONING - COUPE	$309
68-72	BP10092T: FIREWALL WITHOUT AIR CONDITIONING - CONC.	$349
68-72	BP8544T: FIREWALL WITH AIR CONDITIONING - COUPE	$309
68-72	BP8545T: FIREWALL HEATER DELETE (BLANK) - COUPE	$309

FIREWALL OUTER COWL PANELS
THIS IS THE OUTER PANEL AT THE FIREWALL. IT GOES FROM THE BOTTOM OF THE FENDER TO THE TOP OF THE DASH PANEL.
68-72	BP5679T: FIREWALL OUTER COWL PANEL SKIN - LH	$89
68-72	BP5680T: FIREWALL OUTER COWL PANEL SKIN - RH	$89
68-72	BP9730T: FIREWALL OUTER COWL PANEL - LH	$129
68-72	BP9731T: FIREWALL OUTER COWL PANEL - RH	$129

FIREWALL TORQUE BOXES
INCLUDES CAGE NUTS TO ATTACH THE FRONT OF THE BODY TO THE FRAME

68-72	BP2968Z: FIREWALL TORQUE BOXES (SINGLE MOUNT) - PR	$109

FIREWALL WIPER PLATE
PLATE MOUNTS TO FIREWALL & WINDSHIELD WIPER MOTOR MOUNTS IT

FLOOR PANS FULL LENGTH HALF SECTIONS
68-72	BP1277T: FULL FLOOR PAN WITH TRANS TUNNEL AND TOE BOARD - LH	$110
68-72	BP4829T: FULL FLOOR PAN WITH TRANS TUNNEL AND TOE BOARD - RH	$110
68-72	BP1278T: FLOOR PAN ALMOST AS LARGE AS ABOVE DOES NOT INCLUDE TRANS TUNNEL AND TOE BOARD IS A LITTLE SMALLER - LH	$95
68-72	BP4830T: FLOOR PAN ALMOST AS LARGE AS ABOVE DOES NOT INCLUDE TRANS TUNNEL AND TOE BOARD IS A LITTLE SMALLER - RH	$95
THESE MUST SHIP TRUCK FREIGHT

FULL FLOOR PAN ASSEMBLY
FULL FLOOR PANS MUST SHIP TRUCK FREIGHT COLLECT



68-72	BP4633Z: FULL ONE PIECE FLOOR PAN ASSEMBLY (INCLUDES BUCKET SEAT MOUNTING BRACKETS BUT NO BRACES OR UNDER REAR SEAT SECTION)	$279
68-72	BP10117T: FULL ONE PIECE FLOOR PAN ASSEMBLY WITH UNDER REAR SEAT PAN (DOES NOT INCLUDE BUCKET SEAT MOUNTING BRACKETS OR BRACES)	$399

68-72	BP5168Z: FULL ONE PIECE FLOOR PAN ASSEMBLY (INCLUDES REAR SEAT PANEL AND ALL THREE CROSS BRACES)	$719
68-72	BP5631T: FULL ONE PIECE FLOOR PAN ASSEMBLY (INCLUDES ROCKER PANELS, REAR SEAT PANEL AND ALL THREE CROSS BRACES)	$869

FLOOR PAN & TRUNK PAN ASSEMBLY COMPLETE
FULL ONE PIECE FLOOR PAN ASSEMBLY WITH FULL ONE PIECE TRUNK FLOOR PAN. INCLUDES FULL FLOOR PAN, ROCKER PANELS, UNDER REAR SEAT PAN, 3 FULL FLOOR CROSS BRACES, TRUNK FLOOR, GAS TANK BRACES, BODY BRACES & BRACKETS (MUST MODIFY BACK OF TRUNK AT REAR BODY PANEL)
71-72	BP9593T: FULL FLOOR PAN & TRUNK PAN ASSEMBLY COMPLETE WITH VAPOR RETURN LINES BEHIND REAR SEAT (MUST MODIFY BACK OF TRUNK AT REAR BODY PANEL)	$2895

MANUAL TRANS HUMP
THIS PIECE MOUNTS TO THE FLOOR. THE SHIFT BOOT AND RETAINER ATTACH TO IT.

70-72	BP5541T: FLOOR HUMP STEEL (WITH OR WITHOUT CONSOLE) - THIS HUMP WELDS TO FLOOR PAN AND IT IS USED ON ALL CUTLASS & 442 WITH BUCKET OR BENCH SEATS. THIS SHIFT HUMP IS MADE OUT OF CORRECT STEEL, AND LOOKS AND FUNCTIONS LIKE ORIGINAL GM. YOUR MANUAL SHIFT BOOT ATTACHES TO IT. YOU CAN NOW GET THE PROPER STEEL HUMP IF YOU’RE PUTTING A 4-SPEED MANUAL TRANSMISSION ON YOUR CAR. THIS ALLOWS THE FLOOR PAN TO BE ALTERED TO ACCEPT THE FACTORY SHIFTER THE WAY GM DID. THIS PART IS 100% CORRECT FOR CONCOURS RESTORATION.	$69

FLOOR PAN SECTIONS
64-72	BP1282T: FLOOR PAN SECTION (FRONT) - LH	$65
64-72	BP4832T: FLOOR PAN SECTION (FRONT) - RH	$65
64-72	BP1283T: FLOOR PAN SECTION (REAR) - LH	$65
64-72	BP4833T: FLOOR PAN SECTION (REAR) - RH	$65

FLOOR PAN BRACES
FULL FLOOR PAN BRACES
ALL FULL BRACES GO FROM FRAME RAIL TO FRAME RAIL
64-72	BP1286T: FRONT FULL FLOOR BRACE (BRACE UNDER FRONT OF FRONT SEAT)	$95


64-72	BP1287T: MIDDLE FULL FLOOR BRACE (BRACE UNDER REAR OF FRONT SEAT)	$95

64-72	BP4646T: REAR FULL FLOOR BRACE (BRACE UNDER FRONT OF REAR SEAT)	$95
PARTIAL FLOOR PAN BRACES
PARTIAL FLOOR PAN BRACES START AT THE FRAME RAIL AND GO TOWARDS THE CENTER OF THE CAR.
64-72	BP1288T: FRONT PARTIAL FLOOR BRACE (BRACE UNDER FRONT OF FRONT SEAT 17" LONG TOTAL) - LH	$49
64-72	BP1289T: FRONT PARTIAL FLOOR BRACE (BRACE UNDER FRONT OF FRONT SEAT 17" LONG TOTAL) - RH	$49
64-72	BP1290T: MIDDLE PARTIAL FLOOR BRACE (BRACE UNDER REAR OF FRONT SEAT 18" LONG TOTAL) - LH	$49
64-72	BP1291T: MIDDLE PARTIAL FLOOR BRACE (BRACE UNDER REAR OF FRONT SEAT 18" LONG TOTAL) - RH	$49

UNDER SEAT REAR PANELS
THIS PANEL REPAIRS THE COMMONLY RUSTED AREA UNDER THE REAR SEAT
68-72	BP1294T: UNDER REAR SEAT PANEL - LH	$69
68-72	BP1295T: UNDER REAR SEAT PANEL - RH	$69
68-72	BP1296T: UNDER REAR SEAT PANEL - 1 PIECE	$189

FLOOR PAN PLUGS
METAL PLUG MOUNTS IN FLOOR PAN OR TRUNK
64-72	BP1297T: FLOOR PAN PLUG - EA	$4

REAR BODY PANEL
64-72	BP1298T: REAR BODY PANEL	$CALL

BUMPERS (CHROME)
OUR RECHROMED BUMPERS HAVE A FINISH AS GOOD AS OR BETTER THAN GM ORIGINALLY PUT OUT. THIS IS IN NO MEANS SHOW QUALITY PLATING, BUT IS A NICE CHROME JOB FOR THE MONEY. THE BUMPERS ARE BLASTED, JIGGED, STRAIGHTENED AND THEN TRIPLE PLATED.
FRONT


71-72	BP1332T: FRONT BUMPER (NEW) - HIGH QUALITY TRIPLE CHROME PLATED	$329
REAR
71-72	BP1344T: REAR BUMPER STANDARD (NEW) - THE PLATING IS EQUAL TO OR BETTER THAN GM	$339

71-72	BP1345T: REAR BUMPER 442 (NEW) - WITH CUTOUTS FOR DUAL EXHAUST. THE PLATING IS EQUAL TO OR BETTER THAN GM	$379

BUMPERS (FIBERGLASS)
FIBERGLASS FRONT BUMPERS

71-72	BP5109T: FIBERGLASS FRONT BUMPER	$189
FIBERGLASS REAR BUMPERS
71-72	BP5116T: FIBERGLASS 442 REAR BUMPER WITH EXHAUST CUTOUTS	$189

BUMPER BOLTS
CORRECT STAINLESS STEEL CAPPED BOLTS



	BP1356Z: CHROME BUMPER BOLTS - EA	$1.50
BUMPER BRACKETS
64-72	BP1323T: BUMPER BRACKETS	$CALL

BUMPER FILLERS (RUBBER)
BETWEEN BUMPER AND BODY
70-72	BP1312T: REAR BUMPER FILLERS - PR	$19

LICENSE PLATE HOLDERS
FRONT
68-72	BP1358T: FRONT LICENSE PLATE BRACKET	$20

64-77	BP1360T: FRONT LICENSE PLATE RETAINER & SCREW KIT	$9
REAR
71-72	BP1362T: REAR LICENSE BRACKET AND SPRING	$45
61-79	BP1363T: REAR LICENSE PLATE RETAINER & SCREW KIT	$9

VINYL TOPS
OTHER COLORS AVAILABLE - CALL FOR PRICE & AVAILABILITY
68-72	BP8515T: VINYL TOP (DOUBLE SEAM) BLACK	$99
68-72	BP8516T: VINYL TOP (DOUBLE SEAM) WHITE	$99
70-72	BP8517T: VINYL TOP (SUPREME - DOUBLE SEAM) BLACK	$99
70-72	BP8518T: VINYL TOP (SUPREME - DOUBLE SEAM) WHITE	$99

4.1 GRILLES & HEADLIGHTS


GRILLES

72	GH2713T: GRILLE SUPREME (SILVER - INCLUDES MOLDINGS) - PR	$265

72	GH2714T: GRILLE HURST OLDS (BLACK - INCLUDES MOLDINGS) - PR	$285
72	GH2715T: GRILLE "S" (SILVER - INCLUDES MOLDINGS) - PR	$CALL

72	GH2716T: GRILLE ALL 442'S (SILVER & BLACK - INCLUDES MOLDINGS) - PR	$329

GRILLE STONE SHIELD
MOUNTS BETWEEN GRILLES AND GETS PAINTED THE COLOR OF CAR
71-72	GH2719T: GRILLE STONE SHIELD	$119

HEADLAMP HOUSING
THESE ARE THE PLASTIC HOUSINGS AROUND THE HEADLAMPS AND YOUR ALUMINUM BEZEL ATTACHES TO THEM. COME SILVER PAINT TO MATCH
71-72	GH2725T: HEADLAMP HOUSINGS (REPRODUCTION) - PR	$99

HEADLAMP BEZELS
72	GH2734T: HEADLAMP BEZELS (NEW ALUMINUM) - PR	$99

HEADLAMP RETAINING RINGS
THESE ARE THE STAINLESS RINGS THAT MOUNT THE HEADLAMPS TO THE CAPSULES
64-72	GH4723T: HEADLAMP RETAINING RING - EA	$19

HEADLAMP CAPSULE ASSEMBLY COMPLETE
69-72	GH5530T: LH OUTER HEADLAMP CAPSULE ASSEMBLY HI-LO BEAM (A) - COMPLETE ASSEMBLY WITH BUCKET, BULB & STAINLESS TRIM RING. READY TO INSTALL. COMES WITH NEW WAGNER BULB, THE SAME WAY GM SERVICED IT.	$39
69-72	GH5531T: LH INNER HEADLAMP CAPSULE ASSEMBLY HI BEAM (B) - COMPLETE ASSEMBLY WITH BUCKET, BULB & STAINLESS TRIM RING. READY TO INSTALL. COMES WITH NEW WAGNER BULB, THE SAME WAY GM SERVICED IT.	$39
69-72	GH5532T: RH OUTER HEADLAMP CAPSULE ASSEMBLY HI-LO BEAM (C) - COMPLETE ASSEMBLY WITH BUCKET, BULB & STAINLESS TRIM RING. READY TO INSTALL. COMES WITH NEW WAGNER BULB, THE SAME WAY GM SERVICED IT.	$39
69-72	GH5533T: RH INNER HEADLAMP CAPSULE ASSEMBLY HI BEAM (D) - COMPLETE ASSEMBLY WITH BUCKET, BULB & STAINLESS TRIM RING. READY TO INSTALL. COMES WITH NEW WAGNER BULB, THE SAME WAY GM SERVICED IT.	$39



T-3 HEADLAMP SET
THESE FIT ALL CARS WITH A 4 HEADLIGHT SYSTEM

68-72	GH7217Z: T-3 HEADLAMP SET OF FOUR	$139

5.0 HARDWARE & BODY BUSHINGS


BODY BUSHING KIT
INCLUDES ALL SHOULDERED RUBBER BUSHINGS AND BISCUITS FOR RUBBER POINT CHASSIS MOUNTS - HARDWARE SOLD SEPARATELY
68-72	HB2793T: BODY BUSHING KIT (HARDTOP OR CONVERTIBLE)	$109

HARDWARE KITS (BODY MOUNTS)
INCLUDES ALL ATTACHING HARDWARE FOR OUR SUBFRAME BODY MOUNT BUSHING SET - INCLUDES BOLTS & WASHERS
68-72	HB2797T: BODY BUSHING HARDWARE KIT (OEM STYLE BOLTS WITH FLANGED HEAD - BLACK OXIDE)	$39

BODY WASHER SET
64-87	HB9918T: CUPPED BODY WASHER SET (20 PIECES)	$18

CORE SUPPORT BUSHINGS
COMES WITH BUSHINGS & HARDWARE FOR CORE SUPPORT

64-72	HB2799T: CORE SUPPORT BUSHING KIT	$32

FRONT END BOLT KIT
ALL HARDWARE TO BOLT YOUR FRONT END TOGETHER

64-72	HB2885Z: BASIC FRONT END BOLT KIT - BASIC FRONT END SHEET METAL AND GRILLE ASSEMBLY KIT. INCLUDES HEAD PINCH POINT BOLTS FOR FRONT END ASSEMBLY AND CAGE NUTS, FENDER CUP WASHERS, HOOD AND FENDER BOLTS, AND GRILLE MOUNTING HARDWARE	$49

SCREW KIT - EXTERIOR
71-72	HB2807T: EXTERIOR SCREW KIT 4 DR SEDAN (67 SCREWS)	$25.95
71-72	HB2808T: EXTERIOR SCREW KIT 2 DR HARDTOP (4) BACKUP LENS SCREWS, (4) PARKING LENS SCREWS, (8) HEADLIGHT MOLDING SCREWS, (2) MIRROR SCREWS, (2) LICENSE LENS SCREWS, (2) LICENSE MOUNTING SCREWS (16) TAIL LENS SCREWS, (9) GRILLE SCREWS) - 47 SCREWS	$19.95
71-72	HB2809T: EXTERIOR KIT WITH WHEELWELL (77 SCREWS)	$30.95

SCREW KIT - INTERIOR
71-72	HB2820T: INTERIOR SCREW KIT (2 DR) (87 SCREWS)	$27.95
71-72	HB2821T: INTERIOR SCREW KIT (CONVERTIBLE) (87 SCREWS)	$29.95
72	HB2822T: INTERIOR SCREW KIT (4 DR HARDTOP) (77 SCREWS)	$25.95


WHEEL WELL MOLDING SCREW KIT (36 SCREWS)
SCREWS FOR MOUNTING THE WHEEL WELL MOLDINGS TO THE CAR. ONE KIT DOES ALL FOUR WHEEL WELL MOLDINGS.

64-87	HB5288Z: WHEEL WELL MOLDING SCREW KIT (36 SCREWS)	$5

ROCKER MOLDING CLIPS

70-72	HB10469T: ROCKER PANEL MOLDING CLIP 1-3/8" ROUND METAL CLIP - EA	$2.50

70-72	HB10470T: ROCKER PANEL MOLDING CLIP KIT - INCLUDES (8) 1-3/8" ROUND METAL CLIP WITH SLOT & (8) SCREWS - SET	$10

TRUNK MOLDING FASTENERS

68-72	HB10471T: 'S' TRUNK MOLDING ACORN NUT - SELF TAPPING NUT ATTACHES LOWER POT METAL TRUNK MOLDING TO LID (WILL NOT WORK FOR 69-70) - EA	$3.50

69-72	HB10473T: TRUNK EDGE MOLDING SCREW KIT - (8) CHROME SCREWS WITH PLASTIC WASHERS TO ATTACH TRUNK EDGE MOLDING TO LID (FITS 69 442 AND ALL 70-72) - SET	$8.50

6.0 CONVERTIBLE ITEMS


CONVERTIBLE TOPS
ALL CONVERTIBLE TOPS MADE OUT OF OEM VINYL WITH 48 MONTH WARRANTY - 32 OZ MATERIAL
68-72	CV1684T: TOP WITH PLASTIC WINDOW BLACK	$229
68-72	CV1685T: TOP WITH GLASS WINDOW BLACK	$329
68-72	CV1686T: TOP WITHOUT WINDOW BLACK	$149
68-72	CV1687T: TOP WITH PLASTIC WINDOW WHITE	$229
68-72	CV1688T: TOP WITH GLASS WINDOW WHITE	$329
68-72	CV1689T: TOP WITHOUT WINDOW WHITE	$149

CONVERTIBLE REAR WINDOWS
68-72	CV1694T: CONVERTIBLE REAR WINDOW PLASTIC FOR WHITE TOP	$69
68-72	CV1695T: CONVERTIBLE REAR WINDOW GLASS FOR WHITE TOP	$159
68-72	CV1696T: CONVERTIBLE REAR WINDOW PLASTIC FOR BLACK TOP	$69
68-72	CV1697T: CONVERTIBLE REAR WINDOW GLASS FOR BLACK TOP	$159

CONVERTIBLE MOTOR PUMPS

64-72	CV7723Z: CONVERTIBLE TOP MOTOR AND PUMP (3 MOUNTING PIN DESIGN)	$220

64-72	CV7724Z: CONVERTIBLE TOP MOTOR AND PUMP (4 MOUNTING PIN DESIGN)	$220

64-72	CV3911Z: CONVERTIBLE TOP MOTOR CARDBOARD COVER	$5
64-72	CV4639T: CONVERTIBLE TOP MOTOR GROMMETS - EA	$2.50

CONVERTIBLE LIFT CYLINDERS
NEW LIFT CYLINDERS WORK ON LEFT OR RIGHT SIDES

68-72	CV1781Z: CONVERTIBLE LIFT CYLINDER - EA	$129

LIFT CYLINDER ATTACHMENT BOLTS

68-72	CV1650Z: CONVERTIBLE LIFT CYLINDER ATTACHMENT BOLT - EA	$15

TOP HOSE KITS
THESE ARE THE CLEAR PLASTIC HOSES WITH BRASS FITTINGS

64-72	CV1689Z: CONVERTIBLE TOP HOSE AND FITTING KIT - PR	$99

CONVERTIBLE TOP HOSE RETAINER CLIP
64-72	CV9562T: CONVERTIBLE TOP HOSE RETAINER CLIP - CORRECT SPRING METAL CLIP THAT HOLDS THE PLASTIC TOP HOSE TO THE BODY. IT KEEPS THE HOSES OUT OF THE WAY AND ALLOWS THE HOSES TO SLIDE WHILE THE TOP CYLINDERS ARE MOVING, PREVENTING THE HOSES FROM INTERFERING WITH THEM. THESE ARE COMMONLY MISSING OR BROKEN	$8



CONVERTIBLE WELL LINER
MATERIAL BETWEEN BACK SEAT AND TRUNK. TOP FOLDS DOWN INTO
68-72	CV1706T: CONVERTIBLE TOP WELL	$59

CONVERTIBLE TOP HOLD DOWN CABLE
CABLES THAT HOLD MATERIAL TO TOP FRAME

68-72	CV1477Z: CONVERTIBLE TOP HOLD DOWN CABLES - PR	$24

CONVERTIBLE HEADER BOW
THIS IS THE FORWARD MOST HEADER BOW TO WHICH YOUR TOP LATCH AND HEADER WEATHERSTRIPPING ATTACHES. COMMONLY RUSTED OUT. TOP LATCH BOLTS TO IT
68-72	CV1712T: CONVERTIBLE FORWARD HEADER BOW	$359

CONVERTIBLE UPPER WINDSHIELD FRAME BRACE

68-72	CV9913Z: CONVERTIBLE UPPER WINDSHIELD FRAME BRACE - WHAT THE TOP HEADER BOW SITS ON, AND IT ALWAYS HAS A VINYL COVER ON IT FROM THE FACTORY	$159

CONVERTIBLE TOP PIVOT BOLT SET

68-72	CV7514Z: CONVERTIBLE TOP PIVOT BOLT SET - INCLUDES NYLON WASHERS, SHOULDER & WASHER STYLE BOLTS AND BUSHINGS	$59

CONVERTIBLE TOP HEADER VINYL STRIP
VINYL STRIP THAT GETS GLUED TO THE WINDSHIELD TOP FRAME ON CONVERTIBLES - (AVAILABLE IN BLACK, GREEN, BROWN, BLUE & RED)
68-72	CV5662T: CONVERTIBLE TOP HEADER VINYL INSERT	$19

CONVERTIBLE ALIGNING PINS
PINS THAT MOUNT TO HEADER BOW TO GUIDE IT IN PLACE TO WINDSHIELD FRAME
68-72	CV1715T: CONVERTIBLE ALIGNING PIN CHROME - EA	$6

CONVERTIBLE TOP PADS
THESE ARE THE PADS THAT ARE BETWEEN TOP FRAME AND CONVERTIBLE TOP MATERIAL ON EITHER SIDE OF FRAME
64-72	CV1716T: CONVERTIBLE TOP PADS - PR	$24

CONVERTIBLE TACKING STRIPS
PLASTIC MATERIAL THAT TOP BOW AND REAR TACK STRIPS HAVE INSTALLED IN THEM TO STAPLE TO
64-72	CV1717T: CONVERTIBLE TACK STRIP FRONT (PER FOOT)	$2
64-72	CV1718T: CONVERTIBLE TACK STRIP REAR (PER FOOT)	$2


CONVERTIBLE REAR TACK STRIP BAR
THIS IS A COPY OF THE ORIGINAL REAR METAL TACK STRIP BAR WITH PLASTIC INSERT THAT THE CONVERTIBLE TOP ATTACHES TO AT THE REAR IN THE TRUNK WELL. COMMONLY RUSTED AND BROKEN. EXACT COPY OF THE ORIGINAL 3 PIECE DESIGN WITH WELD ON BRACKETS
70-72	CV1722T: CONVERTIBLE TACK STRIP 1 PIECE DESIGN NEW	$279

CONVERTIBLE TOP LATCH
68-72	CV1725T: CONVERTIBLE TOP LATCH ASSEMBLY	$CALL

CONVERTIBLE SUNVISOR SUPPORT BRACKETS & RECEPTICLES
THESE ARE THE BRUSHED CHROME RECEPTICLES THAT MOUNT ON THE TOP OF THE WINDSHIELD PILLARS ON CONVERTIBLE CARS THAT THE TOP LATCH HOOK LATCHES INTO

68-72	CV1730Z: CONVERTIBLE TOP LATCH RECEPTICLE (MOUNTS ON THE CORNER OF WINDSHIELD PILLAR AND TOP LATCHES LATCH TO IT) - PR	$89

CONVERTIBLE TOP LATCH KNUCKLE
64-72	CV1731T: CONVERTIBLE TOP LATCH CHROME KNUCKLE IN PAIRS WITH SPRING AND ROLL PIN - PR	$29

CONVERTIBLE TOP LATCH CHROME HOOK
64-72	CV1732T: CONVERTIBLE TOP LATCH CHROME HOOK - EA	$4

CONVERTIBLE TOP RAIN GUTTER
MOUNTS IN TOP WELL. ALLOWS WATER TO DRAIN FROM REAR OF CONVERTIBLE TOP
68-72	CV1733T: CONVERTIBLE TOP RAIN GUTTER REPRODUCTION	$179

CONVERTIBLE TOP BOOTS
BOOT THAT COVERS TOP WHEN TOP IS IN WELL. ORDER BY INTERIOR COLOR
68-72	CV1736T: CONVERTIBLE TOP BOOT	$109

CONVERTIBLE TOP BOOT STORAGE BAG
64-72	CV1739T: STORAGE BAG FOR TOP BOOT	$10

TOP BOOT SLIDE RAIL
THIS SLIDE RAIL ON SOME CARS SCREWS DIRECTLY TO THE REAR SEAT AND ON SOME OTHERS, IT MOUNTS ON THE REAR SEAT DIVIDER. IT ALLOWS THE TOP BOOT TO SLIDE INTO IT. MEASURES 43” IN LENGTH AND HAS EIGHT SCREW HOLES.
64-72	CV1740T: CONVERTIBLE TOP BOOT SLIDE RAIL	$79

CONVERTIBLE ARM REST REAR COVERS
VINYL UPHOLSTERY TO COVER METAL PANELS IN REAR
68-72	CV1743T: CONVERTIBLE ARM REST COVER SET - 4 PIECE	$59


CONVERTIBLE REAR LOWER ARM REST PANELS
THESE PANELS WILL NEED TO BE UPHOLSTERED USING KIT ABOVE
71-72	CV1748T: CONVERTIBLE ARM REST PANELS LOWER - LH	$95
71-72	CV1749T: CONVERTIBLE ARM REST PANELS LOWER - RH	$95

CONVERTIBLE UPPER REAR ARM REST PANELS
THIS PANEL GOES AROUND CONVERTIBLE TOP ARMS AND WILL NEED TO BE UPHOLSTERED USING THE ARM REST COVER KIT
68-72	CV1754T: CONVERTIBLE UPPER REAR ARM REST PANEL WITH MANUAL TOP - LH	$59
68-72	CV1755T: CONVERTIBLE UPPER REAR ARM REST PANEL WITH MANUAL TOP - RH	$59
68-72	CV1756T: CONVERTIBLE UPPER REAR ARM REST PANEL WITH POWER TOP - LH	$59
68-72	CV1757T: CONVERTIBLE UPPER REAR ARM REST PANEL WITH POWER TOP - RH	$59

CONVERTIBLE TOP SWITCHES AND BEZELS

70-72	CV1761T: CONVERTIBLE TOP SWITCH - NEW COMPLETE WITH CHROME KNOB (DOES NOT INCLUDE BEZEL)	$69

CONVERTIBLE TOP RELAY
64-72	CV5499T: CONVERTIBLE TOP RELAY - REPLACEMENT 30 AMP RELAY	$29

CONVERTIBLE DOOR JAMB ALIGNMENT WEDGES
USED ONLY ON CONVERTIBLE CARS. HELPS REINFORCE DOOR TO DOOR JAMB. KEEPS BODY FROM FLEXING. ON CONVERTIBLES IT IS A MUST, MOST CARS ARE MISSING THESE.
68-72	CV1763T: DOOR JAMB ALIGNMENT WEDGE KIT (4 PIECE BRASS & STAINLESS)	$69

7.0 EXTERIOR MOLDINGS, MIRRORS & DOOR HANDLES


TERMS AND CONDITIONS
*ALL RECONDITIONED MOLDINGS WILL BE LISTED AS "RECOND" AND ALL NEW WILL BE LISTED AS "NEW"*
RECONDITIONED MOLDING EXCHANGE:
MOST ALL RECONDITIONED MOLDINGS WILL WORK ON AN EXCHANGE BASIS. ALL WILL BE SUBJECT TO A CORE CHARGE. CORE CHARGES WILL BE REFUNDED IN FULL AS LONG AS THERE ARE NO TEARS OR RIPS IN THE MOLDING OR EXTRA NON-FACTORY HOLES. IF THERE IS ANY OF THE ABOVE, PARTIAL OR NO CORE WILL BE REFUNDED AND MOLDING WILL BE RETURNED.
OUT RIGHT MOLDING:
ALL OUT RIGHT MOLDINGS ARE SOLD OUT RIGHT. NO CORE CHARGE WILL BE REFUNDED.
RECONDITIONING YOUR ORIGINAL MOLDING:
THIS IS A SERVICE WE OFFER. MOST ALL MOLDINGS CAN BE REFINISHED TO SHOW QUALITY SPECIFICATIONS. PRICES ARE SUBJECT TO TIME, A PRICE QUOTE WILL BE GIVEN AS SOON AS WE RECEIVE MOLDINGS. TIMEFRAME ON RETURN CAN BE AS LITTLE AS ONE WEEK, MOST TAKE THREE TO FIVE WEEKS.

HOOD MOLDING

68-72	XP5700T: HOOD MOLDING REAR EDGE - (NEW STAINLESS) FITS ALL CUTLASS & 442 STANDARD OR RAM AIR HOODS	$89
68-72	XP4441T: HOOD MOLDING REAR EDGE - SHOW QUALITY RECONDITIONED (CORE $40 - EXCHANGE)	$85
72	XP4446T: HOOD MOLDING FRONT EDGE (CHROME) - PR NEW	$59

GRILLE MOLDING
72	XP4449T: GRILLE MOLDINGS (ALUMINUM MOLDINGS THAT MOUNT ON GRILLES) - PR	$59

CONVERTIBLE HEADER MOLDINGS
*RECONDITIONED MOLDINGS WORK ON AN EXCHANGE BASIS. CORE CHARGE IS ADDITIONAL UNTIL WE RECEIVE YOUR OLD MOLDINGS BACK IN RECONDITIONABLE CONDITION. PLEASE READ TERMS AND CONDITIONS.

WINDSHIELD CHROME
68-72	XP4456T: FRONT WINDSHIELD MOLDING SET NEW (HARDTOP ONLY) - 3 PIECES	$99
68-72	XP4453T: FRONT WINDSHIELD MOLDING SET CONVERTIBLE ONLY - SIDES AND UPPER (EXCHANGE - CORE CHARGE $150)*	$229
68-72	XP4457T: FRONT WINDSHIELD LOWER 3" MOLDING NEW	$139
68-72	XP4458T: FRONT WINDSHIELD LOWER 3" MOLDING RECONDITIONED (EXCHANGE - CORE $45)*	$129



68-72	XP10413Z: LOWER WINDSHIELD MOLDING SCREW KIT - (8) CHROME SCREWS WITH PLASTIC WASHERS TO ATTACH 3" MOLDING TO COWL - SET	$8.50
SOME PIECES SOLD SEPARATELY - CALL FOR AVAILABILITY
*RECONDITIONED MOLDINGS WORK ON AN EXCHANGE BASIS. CORE CHARGE IS ADDITIONAL UNTIL WE RECEIVE YOUR OLD MOLDINGS BACK IN RECONDITIONABLE CONDITION. PLEASE READ TERMS AND CONDITIONS

REAR WINDOW CHROME
68-72	XP4463T: REAR WINDOW MOLDING SET RECONDITIONED (EXCHANGE - CORE CHARGE $125) - 4 PIECE SET*	$179
70-72	XP4464T: REAR WINDOW MOLDING SET (SUPREME) RECONDITIONED (EXCHANGE - CORE CHARGE $125) - 4 PIECE SET*	$179
SOME PIECES SOLD SEPARATELY - CALL FOR AVAILABILITY
*RECONDITIONED MOLDINGS WORK ON AN EXCHANGE BASIS. CORE CHARGE IS ADDITIONAL UNTIL WE RECEIVE YOUR OLD MOLDINGS BACK IN RECONDITIONABLE CONDITION. PLEASE READ TERMS AND CONDITIONS

WINDOW MOLDING CLIPS
64-72	XP4466T: FRONT WINDSHIELD MOLDING CLIPS - EA	$0.60
68-72	XP4469T: REAR WINDOW MOLDING CLIPS - EA	$0.60

CONVERTIBLE PINCHWELD MOLDINGS - RECOND
68-72	XP4472T: CONVERTIBLE PINCHWELD MOLDING SET RECONDITIONED (EXCHANGE - CORE CHARGE $150) - 2 PIECE SET	$199
*RECONDITIONED MOLDINGS WORK ON AN EXCHANGE BASIS. CORE CHARGE IS ADDITIONAL UNTIL WE RECEIVE YOUR OLD MOLDINGS BACK IN RECONDITIONABLE CONDITION. PLEASE READ TERMS AND CONDITIONS

CONVERTIBLE PINCHWELD MOLDINGS - NEW
68-72	XP4474T: CONVERTIBLE PINCHWELD MOLDING SET - NEW	$179

CONVERTIBLE PINCHWELD MOLDING CLIPS
CARS TYPICALLY USE ABOUT 10 CLIPS
68-72	XP4477T: CONVERTIBLE PINCHWELD MOLDING CLIP - EA	$5

DOOR EDGE GUARDS (METAL)
70-72	XP4480T: DOOR EDGE GUARDS NEW (2 DOOR) - PR	$42

DRIP RAIL MOLDINGS
THESE ARE THE MOLDINGS ON THE OUTER EDGE OF THE WINDSHIELD PILLAR, THEY ARE APPROXIMATLEY 1/2" WIDE AND 14" LONG

70-72	XP4484T: DRIP RAIL MOLDING SET CUTLASS "S" & 442 (6 PIECE SET) NEW	$179
70-72	XP4485T: DRIP RAIL MOLDING SET (SUPREME) RECONDITIONED (EXCHANGE - CORE CHARGE $75) - 6 PIECE SET*	$199


68-72	XP9679T: DRIP RAIL MOLDING END CAPS - PR	$19
*RECONDITIONED MOLDINGS WORK ON AN EXCHANGE BASIS. CORE CHARGE IS ADDITIONAL UNTIL WE RECEIVE YOUR OLD MOLDINGS BACK IN RECONDITIONABLE CONDITION. PLEASE READ TERMS AND CONDITIONS

PILLAR POST MOLDINGS
68-72	XP4488T: PILLAR POST MOLDINGS HARDTOP ONLY NEW - PR	$24
68-72	XP4489T: PILLAR POST MOLDINGS CONVERTIBLE ONLY RECONDITIONED (EXCHANGE - CORE CHARGE $95) - PR*	$179
*RECONDITIONED MOLDINGS WORK ON AN EXCHANGE BASIS. CORE CHARGE IS ADDITIONAL UNTIL WE RECEIVE YOUR OLD MOLDINGS BACK IN RECONDITIONABLE CONDITION. PLEASE READ TERMS AND CONDITIONS

QUARTER VERTICAL WINDOW CHROME
VERTICAL CHROME MOUNTS ON QUARTER WINDOW & INCLUDES QUARTER WINDOW CHANNEL INSERT BUT YOU MUST ORDER QUARTER VERTICAL WEATHERSTRIP SEPARATELY & THOSE ARE LOCATED IN THE WEATHERSTRIP SECTION OF OUR CATALOG.
68-72	XP4492T: QUARTER VERTICAL CHROME (INCLUDES RUBBER CHANNEL INSERT) - LH	$45
68-72	XP4992T: QUARTER VERTICAL CHROME (INCLUDES RUBBER CHANNEL INSERT) - RH	$45
68-72	XP9643T: QUARTER WINDOW RUBBER CHANNEL INSERT (RUBBER CHANNEL THAT MOUNTS BETWEEN QUARTER WINDOW GLASS & QUARTER VERTICAL CHROME - THIS IS INCLUDED WITH THE VERTICAL CHROME LISTED ABOVE) - PR	$8

OPERA WINDOW MOLDINGS
CHROME PLATED OPERA WINDOW MOLDINGS. THEY MOUNT ON THE OUTSIDE OF THE CAR AROUND THE SIDE OPERA WINDOWS. THESE MOLDINGS ARE MOLDED PLASTIC - YOU WILL NEED TO REUSE YOUR OLD STAINLESS ESCUTCHEONS THAT CONNECT TO THE ENDS. THIS FITS CARS WITH OR WITHOUT VINYL OR LANDAU TOPS

VINYL TOP MOLDING END CAPS

70-72	XP4493T: VINYL TOP MOLDING 4 PIECE POT METAL END CAPS CUTLASS "S" OR 442 NEW	$69

70-72	XP4494T: VINYL TOP MOLDING 2 PIECE POT METAL END CAPS SUPREME - NEW	$59

VINYL TOP MOLDING SET
VINYL TOP MOLDING SETS INCLUDE VINYL TOP MOLDINGS AND END CAPS
70-72	XP4498T: VINYL TOP MOLDING SET (EXCHANGE - CORE CHARGE $150)	$279
*RECONDITIONED MOLDINGS WORK ON AN EXCHANGE BASIS. CORE CHARGE IS ADDITIONAL UNTIL WE RECEIVE YOUR OLD MOLDINGS BACK IN RECONDITIONABLE CONDITION. PLEASE READ TERMS AND CONDITIONS


VINYL TOP MOLDING CLIPS
64-72	XP5684T: VINYL TOP MOLDING CLIP (PLASTIC) - EA	$0.40
VENT WINDOW ASSEMBLY
ASSEMBLY INCLUDES CLEAR VENT WINDOW FRAME, GLASS, WEATHERSTRIPPING & HANDLE

ROCKER PANEL MOLDINGS
70-72	XP4499T: ROCKER PANEL MOLDING RECONDITIONED (EXCHANGE - CORE CHARGE $65) - LH	$195
70-72	XP4993T: ROCKER PANEL MOLDING RECONDITIONED (EXCHANGE - CORE CHARGE $65) - RH	$195
*RECONDITIONED MOLDINGS WORK ON AN EXCHANGE BASIS. CORE CHARGE IS ADDITIONAL UNTIL WE RECEIVE YOUR OLD MOLDINGS BACK IN RECONDITIONABLE CONDITION. PLEASE READ TERMS AND CONDITIONS

UPPER REAR FENDER MOLDING
MOLDING THAT MOUNTS ON FENDER BY WINDSHIELD
70-72	XP4501T: UPPER REAR FENDER MOLDING NEW - PR	$54

EYEBROW FENDER MOLDING FRONT EDGE NEW
TRIPLE CHROME PLATED FENDER EYEBROW MOLDINGS MOUNT ON THE FRONT EDGE OF THE FENDER AND USUALLY BUTTS UP TO THE HOOD MOLDING.

71-72	XP4516T: FENDER EYEBROW PAINT TO MATCH MOLDING - LH	$19

71-72	XP4517T: FENDER EYEBROW PAINT TO MATCH MOLDING - RH	$19

EYEBROW FENDER MOLDINGS FRONT EDGE PAIRS NEW
TRIPLE CHROME PLATED FENDER EYEBROW MOLDINGS MOUNT ON THE FRONT EDGE OF THE FENDER AND USUALLY BUTTS UP TO THE HOOD MOLDING.

71-72	XP5713T: FENDER EYEBROW PAINT TO MATCH MOLDING - PAIR	$38

WHEEL WELL MOLDING NEW

70-72	XP4435T: WHEEL WELL MOLDING SET OF FOUR - NEW MADE LIKE ORIGINAL OF STAINLESS STEEL. FIT ALL "S" 442 AND SUPREME MODELS. ON 70-71 SUPREME THEY USE THE SHORTER MOLDING, BUT THESE WILL WORK AFTER BEING TRIMMED.	$249
70-72	XP4436T: WHEEL WELL MOLDING - LH FRONT	$79
70-72	XP4437T: WHEEL WELL MOLDING - RH FRONT	$79
70-72	XP4438T: WHEEL WELL MOLDING - LH REAR	$79
70-72	XP4439T: WHEEL WELL MOLDING - RH REAR	$79

WHEEL WELL MOLDING RECONDITIONED
70-72	XP4523T: WHEEL WELL MOLDING RECONDITIONED (EXCHANGE - CORE CHARGE $65) - LH FRONT	$85


70-72	XP4524T: WHEEL WELL MOLDING RECONDITIONED (EXCHANGE - CORE CHARGE $65) - RH FRONT	$85
70-72	XP4525T: WHEEL WELL MOLDING RECONDITIONED (EXCHANGE - CORE CHARGE $65) - LH REAR	$85
70-72	XP4526T: WHEEL WELL MOLDING RECONDITIONED (EXCHANGE - CORE CHARGE $65) - RH REAR	$85
*RECONDITIONED MOLDINGS WORK ON AN EXCHANGE BASIS. CORE CHARGE IS ADDITIONAL UNTIL WE RECEIVE YOUR OLD MOLDINGS BACK IN RECONDITIONABLE CONDITION. PLEASE READ TERMS AND CONDITIONS

WHEEL WELL MOLDING NOS GM
70-72	XP4527T: WHEEL WELL MOLDING (NEW GM NOS) - LH REAR	$129

QUARTER PANEL EXTENSION MOLDING BY DECKLID
THESE ARE A CONTINUATION OF THE DECK LID MOLDING. MOUNTS ON THE QUARTER PANEL ABOVE THE BUMPER AND IS COMMONLY MISSING.
70-72	XP4536T: QUARTER EXTENSION SUPREME ONLY HT & CONVERTIBLE - PR	$39

70-72	XP5625T: QUARTER EXTENSION "S" AND 442 HT ONLY (STAINLESS) - PR	$39

TRUNK LID MOLDINGS
70-72	XP10476T: TRUNK LID MOLDING FOR 'S' & 442 HARDTOP CARS REPRODUCTION - 3 PIECE SET	$159
70-72	XP4539T: TRUNK LID MOLDING HARDTOP CARS RECONDITIONED (EXCHANGE - CORE CHARGE $65) - 3 PIECE SET	$129
70-72	XP10477T: TRUNK LID MOLDING FOR SUPREME & CONV. CARS REPRODUCTION - 3 PIECE SET	$159
70-72	XP4540T: TRUNK LID MOLDING CONVERTIBLE OR SUPREME CARS RECONDITIONED (EXCHANGE - CORE CHARGE $65) - 3 PIECE SET	$129
*RECONDITIONED MOLDINGS WORK ON AN EXCHANGE BASIS. CORE CHARGE IS ADDITIONAL UNTIL WE RECEIVE YOUR OLD MOLDINGS BACK IN RECONDITIONABLE CONDITION. PLEASE READ TERMS AND CONDITIONS.

BODY SIDE MOLDING
70-72	XP4551T: SUPREME LOWER BODY SIDE MOLDING	$CALL
*RECONDITIONED MOLDINGS WORK ON AN EXCHANGE BASIS. CORE CHARGE IS ADDITIONAL UNTIL WE RECEIVE YOUR OLD MOLDINGS BACK IN RECONDITIONABLE CONDITION. PLEASE READ TERMS AND CONDITIONS

CLIPS FOR BODY SIDE MOLDING
	XP4553T: PLASTIC CLIP FOR VINYL TOP & BODY SIDE WITH HOLE FOR STUD ON BODY (GREEN) - SIZE 5/8" X 3/4"	$0.50
	XP4554T: PLASTIC CLIP FOR VINYL TOP & BODY SIDE WITH HOLE FOR STUD ON BODY (CLEAR SMALL) - SIZE 3/8" X 5/8"	$0.50


	XP4555T: PLASTIC CLIP FOR VINYL TOP & BODY SIDE WITH HOLE FOR STUD ON BODY (LARGE) - SIZE 1/2" X 3/4"	$0.50
	XP4556T: METAL SPRING CLIP WITH STUD FOR BODY SIDE - STUD SIZE 10-24 3/4" & PLATE SIZE 5/16" X 3/4"	$0.75
	XP4557T: METAL SPRING CLIP WITH STUD FOR BODY SIDE - STUD SIZE 10-24 3/4" & PLATE SIZE 1/2" X 1"	$0.75
	XP4558T: METAL SPRING CLIP WITH STUD FOR BODY SIDE - STUD SIZE 10-24 3/4" & PLATE SIZE 1/2" X 1-11/32"	$0.75

MIRRORS - STANDARD OUTSIDE CHROME
ALL STANDARD MIRRORS INCLUDE GASKET
70-72	XP4577T: STANDARD CHROME MIRROR - LH	$74
70-72	XP4578T: STANDARD CHROME MIRROR - RH	$74

MIRRORS - SPORT OUTSIDE (PAINTED STYLE)
71-72	XP4580T: PAINTED SPORT REMOTE MIRROR - LH	$119
71-72	XP4599T: PAINTED SPORT MANUAL MIRROR - RH	$89
71-72	XP4582T: SPORT MIRROR SET PAINT TO MATCH REMOTE LH KIT INCLUDES GASKETS RETAINERS REMOTE ESCUTCHEON	$249

MIRROR GASKETS & BRACKETS
70-72	XP4567T: REMOTE STANDARD MIRROR GASKET - LH	$5
70-72	XP4569T: STANDARD MIRROR GASKET - EA	$5
71-72	XP4570T: SPORT MIRROR GASKET - LH	$5
71-72	XP5738T: SPORT MIRROR GASKET - RH	$5
71-72	XP4571T: SPORT MIRROR BRACKET - LH	$10

71-72	XP5737T: SPORT MIRROR BRACKET - RH	$10

MIRROR GLASS - OUTSIDE

71-72	XP4584T: REPLACEMENT SPORT MIRROR GLASS - LH	$19

71-72	XP4585T: REPLACEMENT SPORT MIRROR GLASS - RH	$19

DOOR HANDLE KITS OUTSIDE
DOOR HANDLE KIT INCLUDES DOOR HANDLES, BUTTONS & GASKETS FOR BOTH DOORS
64-72	XP4593T: DOOR HANDLE KIT NEW	$59

DOOR HANDLES OUTSIDE
64-72	XP4586T: DOOR HANDLES LH OR RH NEW - EA	$24

DOOR HANDLE BUTTONS
70-72	XP4592T: DOOR HANDLE BUTTONS - PR	$15

DOOR HANDLE GASKETS
64-72	XP4617T: DOOR HANDLE GASKET AND LOCK GASKET SET	$6

8.0 EXTERIOR LENS, BEZELS, HOUSINGS & GASKETS


PARKING LIGHT LENS

71-72	XL4382T: PARKING LIGHT LENS - PR	$69

71-72	XL4383T: PARKING LIGHT LENS GASKET - PR	$6

PARKING LIGHT ASSEMBLIES
COMPLETE PARK LIGHT ASSEMBLIES INCLUDE LENS, HOUSING, GASKET, BULB AND WIRE HARNESS. REPLACE YOUR RUSTED OLD ONES WITH THESE NEW ONES.

71-72	XL4385T: PARKING LIGHT ASSEMBLY - LH	$79

71-72	XL4386T: PARKING LIGHT ASSEMBLY - RH	$79


SIDEMARKER LENSES
1970-1972

70-72	XL4393T: FRONT FENDER SIDEMARKER LENS WITH BEZEL (AMBER) - LH	$59

70-72	XL5623T: FRONT FENDER SIDEMARKER LENS WITH BEZEL (AMBER) - RH	$59

70-72	XL4394T: REAR QUARTER PANEL SIDEMARKER LENS WITH BEZEL (RED) - LH	$59

70-72	XL5156T: REAR QUARTER PANEL SIDEMARKER LENS WITH BEZEL (RED) - RH	$59

70-72	XL4391T: FRONT & REAR SIDEMARKER LENS ASSEMBLY WITH BEZELS - SET OF 4	$189

SIDEMARKER GASKETS

70-72	XL4392T: SIDEMARKER LENS GASKET SET (4 PIECES)	$10

TAIL LIGHT LENS
72	XL4409T: TAIL LIGHT LENS (UPPER - 3 HOLE STYLE) NOS GM	$CALL
72	XL4410T: TAIL LIGHT LENS (LOWER - 3 HOLE STYLE) NOS GM	$CALL

72	XL4642T: TAIL LIGHT LENS (UPPER) REPRODUCTION	$35

72	XL4411T: TAIL LIGHT LENS (LOWER) REPRODUCTION	$35

71-72	XL4412T: TAIL LIGHT LENS GASKET (UPPER) - PR	$5

71-72	XL4413T: TAIL LIGHT LENS GASKET (LOWER) - PR	$5

BACKUP LAMP HOUSING

70-72	XL5432T: BACKUP LAMP HOUSING - THIS IS THE INNER STRUCTURE OF THE BACKUP LAMP. THE INSIDE OF THIS HOUSING IS PAINTED WHITE. COMPLETE WITH WIRING PIGTAIL.	$39

BACKUP LIGHT LENSES & GASKETS

70-72	XL4430T: BACKUP LIGHT LENS - EA	$19

70-72	XL4431T: BACKUP LIGHT LENS GASKET- PR	$6

LICENSE LAMPS



68-72	XL4432T: LICENSE LAMP LENS	$12

68-72	XL4433T: LICENSE LAMP GASKET	$2

68-72	XL4434T: LICENSE LAMP ASSEMBLY - COMES WITH LAMP, LENS, HOUSING AND WIRE. FITS HARDTOP OR CONVERTIBLE	$39

9.0 ELECTRICAL & SWITCHES


TURN SIGNAL SWITCHES
69-75	EL4873T: TURN SIGNAL SWITCH WITH CORNERING LIGHTS (GM #1997984)	$61
69-75	EL4874T: TURN SIGNAL SWITCH WITHOUT CORNERING LIGHTS (GM #1997983)	$49

HAZARD SWITCH KNOB

67-72	EL3001Z: HAZARD SWITCH KNOB CHROME 1/2" LONG WITH FLASHER EMBOSSED ON END	$8

67-77	EL3000Z: HAZARD SWITCH KNOB CHROME 3/4" LONG WITH FLASHER EMBOSSED ON SIDE	$16

67-77	EL3002Z: HAZARD SWITCH KNOB CHROME 1" LONG WITH FLASHER EMBOSSED ON SIDE	$9

71-77	EL3003Z: HAZARD SWITCH KNOB (BLACK)	$4

CANCEL CAMS
69-72	EL2266T: CANCEL CAM WITHOUT TILT	$12
69-72	EL2267T: CANCEL CAM WITH TILT	$12

HEADLAMP SWITCHES
64-72	EL2268T: HEADLIGHT DIMMER SWITCH FLOOR MOUNTED	$10
69-72	EL2270T: HEADLIGHT SWITCH	$25

POWER WINDOW SWITCHES

71-77	EL5967Z: POWER WINDOW SWITCH POT METAL WITH SQUARE CORNERS - 4 BUTTON - MOUNTS ON DOOR PANEL (LH FRONT 2DR & 4 DR, FITS 71-72 ALL & 73-77 4 DR ONLY)	$69

71-77	EL2026Z: POWER WINDOW SWITCH WITH SQUARE CORNERS - 1 BUTTON - MOUNTS ON DOOR PANEL (RH FRONT AND LH/RH REAR 2DR & 4DR) REPLACES GM#: 1725094. IT IS MADE OF DIE CAST METAL AND IS CHROME PLATED	$39

POWER WINDOW RELAY
67-72	EL5465T: POWER WINDOW RELAY - REPLACES GM #7728426	$39

POWER DOOR LOCK SWITCH

71-77	EL2027Z: POWER DOOR LOCK SWITCH - SINGLE BUTTON - READS LOCK AND HAS THE CORRECT SQUARE CORNERS AND PROFILE. REPLACES GM#: 1725099. IT IS MADE OF DIE CAST METAL AND IS CHROME PLATED	$59

WIPER SWITCHES



70-72	EL10138T: WINDSHIELD WIPER SWITCH FOR RECESSED WIPERS - RECESSED WINDSHIELD WIPER ARMS ARE THOSE THAT GO UNDER THE HOOD WHEN IN THE OFF POSITION. REPLACES GM # 1994101	$59

NEUTRAL SAFETY SWITCH BRACKET
THIS IS THE UNIQUE BRACKET FOR A 1970 CUTLASS DUALGATE ONLY. IT ALLOWS THE NEUTRAL SAFETY SWITCH TO BE ATTACHED TO THE DUALGATE SHIFTER. COMMONLY MISSING

IGNITION SWITCHES
69-77	EL2290T: IGNITION SWITCH (FOR MODELS WITHOUT TILT )	$18
69-77	EL2291T: IGNITION SWITCH (FOR MODELS WITH TILT WHEEL)	$18

IGNITION KEY BUZZER SWITCH

69-81	EL5307Z: IGNITION KEY BUZZER SWITCH FOR CARS WITHOUT TILT STEERING	$19

DOOR JAMB PIN SWITCHES
64-87	EL2292T: DOOR JAMB SWITCH - SINGLE ROUND TERMINAL	$5
64-87	EL2293T: DOOR JAMB SWITCH - SINGLE SPADE TERMINAL	$CALL
64-87	EL10505T: DOOR JAMB SWITCH - DUAL SPADE TERMINAL	$6

VOLTAGE REGULATOR & COVER

64-72	EL7159Z: VOLTAGE REGULATOR (ORIGINAL STYLE WITH CORRECTLY EMBOSSED DELCO-REMY COVER) GM # 1119515	$59
64-72	EL5222T: VOLTAGE REGULATOR COVER - NOS GM (THIS IS A CORRECT DELCO COVER WITH THE CORRECT LOGO THAT MOUNTS ON THE VOLTAGE REGULATOR)	$19

VOLTAGE REGULATOR MOUNTING KIT
64-87	EL9743T: VOLTAGE REGULATOR MOUNTING KIT (3 WELL NUTS & 3 SCREWS)	$9

BACKUP LIGHT SWITCH - MANUAL TRANS
MUST ORDER BACKUP LIGHT SWITCH BRACKET SEPARATELY
69-72	EL8531T: BACKUP LIGHT SWITCH (MOUNTS IN THE BOTTOM OF THE STEERING COLUMN & YOUR FACTORY WIRE PLUGS INTO IT)	$29

DOWNSHIFT SWITCH - KICK DOWN
MOUNTS BY THE GAS PEDAL

69-72	EL2058Z: TRANSMISSION KICKDOWN SWITCH WITH 400 TRANS	$19
69-72	EL2298T: DOWNSHIFT SWITCH BRACKET	$22

STOPLIGHT SWITCH
67-72	EL4968T: STOPLIGHT SWITCH WITH CRUISE	$13
64-72	EL4969T: STOPLIGHT SWITCH WITHOUT CRUISE	$10


TRUNK LAMP ASSEMBLY
REPRODUCTION FACTORY STYLE TRUNK LAMP ASSEMBLY. KIT INCLUDES LIGHT ASSEMBLY, BULB, WIRING HARNESS AND MOUNTING HARDWARE. MOUNTS ON TRUNK HINGE.
68-72	EL5666T: TRUNK LAMP ASSEMBLY WITH HARNESS (COUPE)	$125
68-72	EL5667T: TRUNK LAMP ASSEMBLY WITH HARNESS (CONV.)	$125

BLOWER MOTOR SWITCH
THIS IS THE FACTORY SWITCH THAT MOUNTS IN THE HEATER CONTROL
70-72	EL2299T: BLOWER MOTOR SWITCH WITH A/C	$33

STARTER HEAT SHIELD

64-77	EL10115T: STARTER HEAT SHIELD - MOUNTS BETWEEN STARTER AND FRAME AND IS A SHIELD BETWEEN THE EXHAUST PIPE AND STARTER AS WELL AS A BRACE FROM THE STARTER TO THE FRAME.	$29

64-75	EL5527T: HEAT SHIELD FOR STARTER SOLENOID (V8) - TWO PIECE DESIGN RIVETED TOGETHER. MOUNTS TO THE OUTSIDE OF SOLENOID TO PROTECT THE EXHAUST MANIFOLD HEAT FROM THE SOLENOID.	$29

HORNS

64-88	EL2061Z: HIGH NOTE HORN (REPRODUCTION)	$37

64-88	EL2062Z: LOW NOTE HORN (REPRODUCTION)	$37

64-88	EL2066Z: HIGH NOTE & LOW NOTE FACTORY STYLE HORN SET WITH BOLT ON BRACKETS (DELCO REMY - MADE IN USA)	$129

64-88	EL2067Z: HIGH NOTE & LOW NOTE FACTORY STYLE HORN SET WITH WELDED ON BRACKETS (DELCO REMY - MADE IN USA)	$139

HORN RELAY
69-75	EL2301T: HORN RELAY	$29

OIL PRESSURE SWITCH/SENDING UNIT
64-77	EL2303T: OIL PRESSURE SWITCH (WARNING LIGHTS)	$9
66-77	EL2304T: OIL PRESSURE SWITCH (RALLY GAUGES)	$49

66-77	EL10123T: RALLY PACK OIL PRESSURE ELBOW - CORRECT BRASS ELBOW FOR THE OIL PRESSURE SENDING UNIT ON YOUR 66-77 CUTLASS WITH RALLY GAUGES. THIS ELBOW ALLOWS YOU TO MOUNT THE OVERSIZED FACTORY OIL PRESSURE SWITCH TO YOUR BLOCK WITHOUT INTERFERENCE. WITHOUT THIS ELBOW THERE IS NO WAY TO MOUNT THE SENDING UNIT. THIS BLOCK IS MADE JUST LIKE THE FACTORY PIECE. THIS IS NOT A CHEAP AFTERMARKET ADAPTER BLOCK, THIS IS WHAT GM USED WHEN THE ASSEMBLED THE CAR AT THE FACTORY	$20


TEMPERATURE SWITCH/SENDING UNIT
64-72	EL2306T: TEMPERATURE SWITCH (WARNING LIGHTS)	$15
66-72	EL5622T: TEMPERATURE SENDING UNIT WITH GAUGES OE STYLE WITH SPADE CONNECTOR	$25
66-77	EL2307T: TEMPERATURE SWITCH (RALLY GAUGES)	$15

TCS SWITCH
WE'VE NOW REPRODUCED THE FACTORY TCS SOLENOIDS WITH BRACKETS. THESE ARE ALL MADE IN THE USA AND COME COMPLETE WITH THE OEM MOUNTING BRACKETS. MOUNTS ON THE CARBURETOR AND HAS 2 FLAT ELECTRIC THERMAL STYLE PRONGS AND 3 PORT VACUUM OUTLETS. BRACKET MOUNTS TO THE CARBURETOR STUD ON THE INTAKE.

70-75	EL8427Z: MANUAL TRANSMISSION TCS SWITCH PIN STYLE # 3961567 - THIS IS THE SWITCH THAT MOUNTS INTO THE MANUAL TRANSMISSION COVERS ON ALL MUNCIE M20 / M21 / M22 & BORG WARNER T10 TRANSMISSIONS. THIS TRANSMISSION SPARK CONTROL SWITCH FITS MOST ALL GM MODELS WITH THE ABOVE TRANSMISSIONS.	$32

70-75	EL8426Z: MANUAL TRANSMISSION TCS SWITCH SPADE STYLE # 3996286 - THIS IS THE SWITCH THAT MOUNTS INTO THE MANUAL TRANSMISSION COVERS ON ALL MUNCIE M20 / M21 / M22 & BORG WARNER T10 TRANSMISSIONS. THIS TRANSMISSION SPARK CONTROL SWITCH FITS MOST ALL GM MODELS WITH THE ABOVE TRANSMISSIONS.	$32

WIRE RETAINER FOR TCS SWITCH
BOLTS TO THE SIDE OF THE TRANSMISSION COVER AND GUIDES THE TCS HARNESS TO THE SWITCH ON THE TRANSMISSION COVER. IT WILL PREVENT THE WIRE FROM GETTING CAUGHT UP IN THE SHIFTER LINKAGE. THIS DIE STAMPED CLIP FEATURES THE RUBBER COATED TABS TO HOLD THE HARNESS. MOST ALL RESTORATIONS NEED THIS CLIP. PERFECT FOR YOUR CONCOURS RESTORATION

70-74	EL9346Z: MUNCIE M-20/M-21/M-22 WIRE RETAINER FOR TCS SWITCH	$19

BATTERY TRAY

68-72	EL2310T: BATTERY TRAY (THIS IS THE SMALL STYLE BATTERY TRAY USED ON ALL 350 ENGINES & ALSO 68-69 W-30 & W-31 WITH RAM AIR ONLY)	$25

68-72	EL2311T: BATTERY TRAY (THIS IS THE LARGE STYLE BATTERY TRAY USED ON 400 & 455 ENGINES)	$25

FIREWALL RUBBER ACCESSORY RELAY COVER
WE'VE NOW REPRODUCED THE COMMONLY MISSING RUBBER RELAY COVER THAT MOUNTS ON THE FIREWALL. THE RELAY WAS USED ON CARS WITH POWER OPTIONS LIKE CONVERTIBLE TOP, POWER WINDOWS, POWER SEAT, CRUISE CONTROL, ETC.



64-72	EL2685Z: RUBBER FIREWALL RELAY COVER FOR CONVERTIBLE & POWER ACCESSORIES	$10
BATTERY TRAY HOLD DOWN COMPONENTS
68-74	EL2317T: BATTERY TRAY CLAMP	$3
68-74	EL2318T: BATTERY TRAY BOLT	$2

BATTERY
NEW FACTORY BATTERY COMES DRY CHARGED. YOU MUST SUPPLY YOUR OWN BATTERY ACID FROM YOUR LOCAL AUTO PARTS STORE
67-72	EL4718T: R-59 BATTERY (MAINTENANCE FREE) FOR MODELS WITH TOP TERMINAL BATTERY & 1970 4 CYL., 6 CYL., 307, 350 & 400 CUBIC INCH MOTORS. VALVE REGULATED, SEALED MAINTENANCE FREE DESIGN. ABSORBENT GLASS MAT TECHNOLOGY. SHIPPED FULLY CHARGED (NO ACID FILLING REQUIRED), 4 YEAR PRO-RATED WARRANTY, GENUINE HARD RUBBER CASE; EXACT DETAILING, 720 CRANKING AMPS, 120 MINUTES OF RESERVE CAPACITY & GM RESTORATION PARTS APPROVED	$299
71-74	EL2321T: R-89 BATTERY SIDE POST (MAINTENANCE FREE)	$299

BATTERY TOPPER
THIS IS AN INEXPENSIVE WAY OF GIVING YOUR CAR THE VINTAGE APPEARANCE OF AN ORIGNAL BATTERY, BY USING A MAINTENANCE FREE BATTERY FROM YOUR LOCAL AUTO PARTS STORE. THIS COVERS THE BATTERY. COMES COMPLETE WITH EMBOSSED LOGO AND FACTORY YELLOW CAPS FOR DC-12 BATTERY OR BLACK AND RED CAPS FOR R-59/R-79/R-89 BATTERIES.
	EL2322T: DC-12 BATTERY TOPPER (TOP POST)	$45

66-72	EL3314Z: R-59 BATTERY TOPPER (TOP POST STYLE BATTERY) - THIS COVERS THE BATTERY. COMES COMPLETE WITH EMBOSSED LOGO AND FACTORY BLACK AND RED CAPS FOR R-59 BATTERY.	$49

69-74	EL3316Z: R-89 BATTERY TOPPER (SIDE POST STYLE BATTERY) - THIS COVERS THE BATTERY. HAS THE CORRECT TEXTURED SURFACE & FIVE DIVIDER SINK LINES. COMES COMPLETE WITH EMBOSSED LOGO AND FACTORY BLACK AND RED CAPS FOR R-89 BATTERY.	$49


BATTERY CABLES - NEGATIVE/GROUND
1972
72	EL2355T: D BATTERY CABLE, NEGATIVE, V8, 350 C.I.	$42
72	EL2356T: D BATTERY CABLE, NEGATIVE, V8, 455 C.I.	$42


BATTERY CABLES - POSITIVE
1972
72	EL2403T: D BATTERY CABLE, POSITIVE, V8, 350 C.I.	$42

72	EL2404T: D BATTERY CABLE, POSITIVE, V8, 455 C.I.	$42


1974
BATTERY CABLE ROUTING TUBES

68-74	EL5447T: MANUAL TRANS BATTERY CABLE ROUTING TUBE & BRACKET - THIS IS THE COMMONLY MISSING TUBE AND BRACKET USED ONLY ON MANUAL TRANSMISSION 3 OR 4 SPEED CARS. IT MOUNTS ON THE HEAD IN THE BACK OF THE MOTOR AND ROUTES THE CABLE FROM ACROSS THE INTAKE MANIFOLD DOWN TO THE STARTER. KEEPS THE BATTERY CABLES OUT OF THE WAY OF YOUR CLUTCH Z BAR LINKAGE. THE TUBE IS MADE OUT OF HEAT RESISTANT PLASTIC AND IS 7 5/16" IN LENGTH. FITS ALL 350 400 455 MOTORS WITH MANUAL TRANSMISSION. INCLUDES TUBE, BRACKET AND HOLD DOWN SCREW.	$69

68-74	EL5455T: AUTO TRANS BATTERY CABLE ROUTING TUBE & BRACKET - THIS IS THE COMMONLY MISSING TUBE AND BRACKET USED ONLY ON CARS WITH AUTOMATIC TRANSMISSION. IT MOUNTS ON THE FRAME AND ROUTES THE BATTERY CABLE. KEEPS THE BATTERY CABLES OUT OF THE WAY OF YOUR MOTOR. THE TUBE IS MADE OUT OF HEAT RESISTANT PLASTIC AND IS 5 1/16" IN LENGTH. FITS ALL 350 400 455 MOTORS WITH AUTOMATIC TRANSMISSION. INCLUDES TUBE, BRACKET AND HOLD DOWN SCREW.	$39

10.0 WEATHERSTRIPPING & RUBBER BUMPERS


DOOR WEATHERSTRIPPING
68-72	WS4214T: DOOR WEATHERSTRIPS WITH CLIPS, 2 DOOR SEDAN - PR	$59
68-72	WS4215T: DOOR WEATHERSTRIPS WITH CLIPS, 4 DOOR SEDAN AND WAGON, FRONT DOORS - PR	$59
68-72	WS4216T: DOOR WEATHERSTRIPS WITH CLIPS, 4 DOOR SEDAN AND WAGON, REAR DOORS - PR	$59
69-72	WS4217T: DOOR WEATHERSTRIPS WITH CLIPS AND MOLDED ENDS, HARDTOP, CONVERTIBLE - PR	$59

ROOFRAIL WEATHERSTRIPPING
WEATHERSTRIPPING HAS MOLDED ENDS
69-72	WS4224T: ROOFRAIL WEATHERSTRIPS HARDTOP - PR	$59

DOOR BOTTOM DRAIN SEAL
66-72	WS5466T: DOOR BOTTOM DRAIN SEAL (4 REQUIRED PER CAR) - EA	$3

CONVERTIBLE TOP WEATHERSTRIPPING


68-72	WS4233T: CONVERTIBLE TOP WEATHERSTRIP KIT WITH HEADER SEAL	$179

CONVERTIBLE PILLAR POST WEATHERSTRIPPING
69-72	WS4230T: CONVERTIBLE PILLAR POST WEATHERSTRIPS WITH MOLDED ENDS - PR	$49

CONVERTIBLE HEADER SEAL WEATHERSTRIPPING
68-72	WS4236T: CONVERTIBLE TOP HEADER SEAL WITH CLIPS & MOLDED ENDS	$45

VENT WINDOW WEATHERSTRIPPING
68-72	WS4241T: VENT WEATHERSTRIPPING SEDAN - PR	$69

VENT WINDOW GLASS RUN CHANNELS
68-72	WS4244T: GLASS RUN CHANNEL - PR	$22

WINDOWFELT KITS
WINDOWFELTS ARE OFFERED IN REPRODUCTION OR OEM KITS. THE REPRODUCTION WINDOWFELTS HAVE A FLAT CHROME BEAD AND THE OEM STYLE HAS A ROUND CHROME BEAD LIKE ORIGINAL.
2 DOOR HARDTOP
70-72	WS4746T: WINDOWFELT KIT "S" 2 DOOR HARDTOP (8 PIECES) - REPRODUCTION	$79
70-72	WS4756T: WINDOWFELT KIT "S" 2 DOOR HARDTOP (8 PIECES) - OEM	$109
70-72	WS4747T: WINDOWFELT KIT "S" 2 DOOR HARDTOP WITH SPECIAL MOLDING (8 PIECES) - REPRODUCTION	$79


70-72	WS4748T: WINDOWFELT KIT SUPREME 2 DOOR HARDTOP (8 PIECES) - REPRODUCTION	$79
70-72	WS4757T: WINDOWFELT KIT SUPREME 2 DOOR HARDTOP (8 PIECES) - OEM	$109
70-72	WS4749T: WINDOWFELT KIT SUPREME 2 DOOR HARDTOP WITH SPECIAL MOLDING (8 PIECES) - REPRODUCTION	$79

70-72	WS4758T: WINDOWFELT KIT SUPREME 2 DOOR HARDTOP WITH SPECIAL MOLDING (8 PIECES) - OEM	$109
CONVERTIBLE
70-72	WS4257T: WINDOWFELT KIT CONVERTIBLE SUPREME (8 PIECES) - REPRODUCTION	$79
70-72	WS4258T: WINDOWFELT KIT CONVERTIBLE SUPREME (8 PIECES) - OEM	$109

70-72	WS4259T: WINDOWFELT KIT CONVERTIBLE SUPREME WITH SPECIAL MOLDING (8 PIECES) - REPRODUCTION	$79
2 DOOR SEDAN
70-72	WS4761T: WINDOWFELT KIT 2 DOOR SEDAN "S" POST (8 PIECES) - REPRODUCTION	$79
70-72	WS4762T: WINDOWFELT KIT 2 DOOR SEDAN "S" POST (8 PIECES) - OEM	$109

QUARTER VERTICAL WEATHERSTRIPPING
68-72	WS4273T: VERTICAL WEATHERSTRIPS WITH STEEL CORES - PR	$19

TRUNK WEATHERSTRIPPING
64-77	WS4274T: TRUNK WEATHERSTRIPPING - REPRODUCTION	$15
64-77	WS4275T: TRUNK WEATHERSTRIPPING - GM	$129

GLUE WEATHERSTRIPPING ADHESIVE
	WS4277T: 3M WEATHERSTRIP GLUE - TUBE	$8

QUARTER WINDOW U-JAMBS
MOUNTS IN DOOR JAMB
68-72	WS4282T: REAR QUARTER U-JAMBS - PR	$19

RUBBER BUMPERS
HOOD ADJUSTMENT BUMPER

64-77	WS4288T: HOOD ADJUSTMENT BUMPER - EA	$3.50
HOOD TO FENDER
70-77	WS4291T: HOOD TO FENDER BUMPER - EA	$2.50


68-77	WS9535T: HOOD TO FENDER BUMPER SET OEM - SET OF 4	$7.95
DOOR BUMPERS

68-87	WS4294T: DOOR BUMPER - EA	$1.50
TRUNKLID BUMPER

64-87	WS4295T: TRUNKLID BUMPER - EA	$1.50
MISCELLANEOUS BUMPER
64-87	WS4296T: CONSOLE BUMPER - EA	$1
64-87	WS4621T: GAS DOOR BUMPER - EA	$2
70-72	WS5650T: COWL BUMPER - EA	$4.50


RUBBER BUMPER KITS

71-72	WS10101T: RUBBER BUMPER KIT (KIT INCLUDES 2 HOOD ADJUSTMENT BUMPERS, 4 SIDE OF HOOD BUMPERS, 4 DOOR BUMPERS, 2 TRUNK LID BUMPERS, 2 GLOVE BOX BUMPERS & 2 GAS DOOR BUMPERS)	$19
CONVERTIBLE REAR ARM INNER SEALS
THESE ARE THE SEALS THAT MOUNT BY LOWER CONVERTIBLE ARMS THAT MOUNT ON THE BODY BY REAR SEAT
68-72	WS4298T: REAR CONVERTIBLE REAR ARM INNER SEALS	$39

HOOD TO COWL SEAL
68-72	WS4300T: HOOD COWL SEAL (SPONGE)	$14
68-72	WS4301T: HOOD COWL SEAL (DENSE)	$10

HOOD TO COWL SEAL CLIPS
68-72	WS4302T: HOOD TO COWL SEAL CLIPS (PLASTIC)	$6
68-72	WS4303T: HOOD TO COWL SEAL CLIPS (METAL)	$6

WEATHERSTRIP KITS

*MUST SPECIFY CAR TYPE WHEN ORDERING*
64-72 2 DOOR HARDTOPS
KIT INCLUDES THE FOLLOWING FOR HARDTOPS, DOOR, ROOFRAIL, QUARTER VERTICAL, QUARTER U-JAMBS, TRUNK, RUBBER BUMPERS, HOOD TO COWL SEAL & WINDOWFELTS
64-72	WS4304T: WEATHERSTRIP KIT (2 DOOR HARDTOP) WITH REPRODUCTION WINDOWFELTS	$249

64-72	WS5162T: WEATHERSTRIP KIT (2 DOOR HARDTOP) WITH OEM WINDOWFELTS	$279
64-72 2 DOOR SEDAN
KIT INCLUDES THE FOLLOWING FOR SEDANS, DOORS, ROOFRAIL, QUARTER VERTICAL, QUARTER U-JAMBS, TRUNK, RUBBER BUMPERS, HOOD TO COWL SEAL & WINDOWFELTS
64-72	WS4305T: WEATHERSTRIP KIT (2 DOOR SEDAN) WITH REPRODUCTION WINDOWFELTS	$249


64-72	WS5163T: WEATHERSTRIP KIT (2 DOOR SEDAN) WITH OEM WINDOWFELTS	$279
64-72 CONVERTIBLES
KIT INCLUDES THE FOLLOWING FOR CONVERTIBLES, CONVERTIBLE TOP, HEADER SEAL, DOORS, PILLAR POST, QUARTER VERTICAL, QUARTER U-JAMBS, TRUNK, RUBBER BUMPERS, HOOD TO COWL & WINDOWFELTS
64-72	WS4306T: WEATHERSTRIP KIT (CONVERTIBLE) WITH REPRODUCTION WINDOWFELTS	$399
64-72	WS4307T: WEATHERSTRIP KIT (CONVERTIBLE) WITH OEM WINDOWFELTS	$439
68-72	WS5730T: CONVERTIBLE TOP WEATHERSTRIP KIT - INCLUDES THE HEADER SEAL, ALONG WITH THE SIDE RAIL WEATHERSTRIPS. THIS IS FOR SET OF WEATHERSTRIPS THAT SEAL THE TOP WHEN IT IS UP	$179

11.0 AUTOMATIC TRANSMISSION & RELATED PARTS


TRANSMISSION KICKDOWN CABLE
KICKDOWN CABLE GOES FROM THE TRANSMISSION TO THE GAS PEDAL ASSEMBLY ON THE FIREWALL

68-72	AT1019T: TURBO 350 KICKDOWN CABLE REPRODUCTION	$69
68-72	AT4643T: TURBO 350 KICKDOWN CABLE GM	$159

TRANSMISSION KICKDOWN SWITCH BRACKET
68-72	AT1021T: TRANSMISSION KICKDOWN SWITCH BRACKET TURBO 400	$22

TRANSMISSION INSPECTION COVER
68-77	AT1022T: TURBO 350 OR 400 INSPECTION COVER (PLASTIC)	$39

TRANSMISSION MOUNT

64-72	AT1020Z: TRANSMISSION MOUNT (FITS MANUAL TRANS, POWERGLIDE & 350)	$29

64-72	AT1022Z: TRANSMISSION MOUNT (400)	$29

TRANSMISSION DIPSTICK & TUBE KIT
64-77	AT1024T: TRANSMISSION DIPSTICK & TUBE - REPLACEMENT STYLE	$39
68-73	AT5663T: TRANSMISSION DIPSTICK ONLY - GM REPLACEMENT	$19

DRIVE SHAFT YOKES
64-72	AT1025T: 27 SPLINE DRIVE SHAFT SLIP YOKE (T350) WITH 1.50" SEAL DIAMETER SY3R-3500, 5.50" CENTER OF U-JOINT TO END - INSIDE SNAPRING DESIGN	$89
64-72	AT1026T: 27 SPLINE DRIVE SHAFT SLIP YOKE (T350) WITH 1.50" SEAL DIAMETER SY1310-3550, 5.469" CENTER OF U-JOINT TO END - OUTSIDE SNAPRING DESIGN	$89
64-72	AT5245T: 32 SPLINE DRIVE SHAFT SLIP YOKE (T400) WITH 1.885" SEAL DIAMETER SY1310-4000, 5.50" CENTER OF U-JOINT TO END - OUTSIDE SNAPRING DESIGN	$89
64-72	AT5246T: 32 SPLINE DRIVE SHAFT SLIP YOKE (T400) WITH 1.885" SEAL DIAMETER SY3R-4000, 5.50" CENTER OF U-JOINT TO END - INSIDE SNAPRING DESIGN	$89

DRIVE SHAFTS
NEW FACTORY TAPERED DOWN SWEDGED DRIVESHAFT. THESE NEW DRIVESHAFTS FEATURE THE SAME SHAPE AND DESIGN AS GM, UNLIKE THE AFTERMARKET STRAIGHT TUBING. THESE DRIVESHAFTS HAVE TAPERED DOWN TUBES ON EITHER END. THE DRIVESHAFT TUBES ARE SEMI-POLISHED BARE STEEL, FULLY MACHINE WELDED, END CAPS WITH FACTORY STYLE BLUING ON THE ENDS, THEN CLEAR COATED TO PRESERVE THE NATURAL APPEARANCE. TOTALLY BALANCED, THEY COME COMPLETE WITH NEW SLIP YOKE AND FULLY GREASABLE U JOINTS. MOUNTS ON THE YOKE OF YOUR REAR END.

LENGTHS ARE MEASURED CENTER TO CENTER OF REAR U JOINTS, OF WHICH WE OFFER TWO STYLES: 1310 AND 1330. THE MEASUREMENT OF THE YOKE OF YOUR REAR END IS REQUIRED TO GET THE PROPER FIT OF THE DRIVESHAFT. YOU WILL NEED TO KNOW THREE THINGS TO PURCHASE THE PROPER DRIVESHAFT: 1) THE LENGTH OF YOUR DRIVESHAFT CENTER TO CENTER; 2) THE SLIP YOKE STYLE; 3) THE U JOINT TYPE, EITHER 1310 OR 1330. THE 1310 MEASURES 3 1/4" FROM CAP TO CAP; THE 1330 MEASURES 3 5/8" FROM CAP TO CAP.

68-72

AT1027T: DRIVESHAFT HEAVY DUTY - WITH 32 SPLINE YOKE, TURBO 400 TRANSMISSIONS. MEASURES 54 1/2" AND COMES WITH 1310 REAR U JOINT WHICH MEASURES 3 1/4" CAP TO CAP.

$399

68-72

AT5688T: DRIVESHAFT HEAVY DUTY - WITH 32 SPLINE YOKE, TURBO 400 TRANSMISSIONS. MEASURES 54 1/2" AND COMES WITH 1330 REAR U JOINT WHICH MEASURES 3 5/8" CAP TO CAP.

$399

68-72

AT5689T: DRIVESHAFT STANDARD DUTY - WITH 27 SPLINE YOKE, M20, M21, M22, TURBO 350, POWER GLIDE TRANSMISSIONS. MEASURES 55 1/2" AND COMES WITH 1310 REAR U JOINT WHICH MEASURES 3 1/4" CAP TO CAP.

$399

68-72

AT5690T: DRIVESHAFT HEAVY DUTY - WITH 32 SPLINE YOKE (M22), SOME TURBO 400 TRANSMISSIONS. MEASURES 55 1/2" AND COMES WITH 1330 REAR U JOINT WHICH MEASURES 3 5/8" CAP TO CAP, SAME AS LS5, LS6, GTO, GS, ETC.

$399

68-72

AT5691T: DRIVESHAFT HEAVY DUTY - WITH 32 SPLINE YOKE (M22), SOME TURBO 400 TRANSMISSIONS. MEASURES 55 1/2" AND COMES WITH 1310 REAR U JOINT WHICH MEASURES 3 1/4" CAP TO CAP, SAME AS LS5, LS6, GTO, GS, ETC.

$399

TRANSMISSION COOLER LINES

ORIG

STAINLESS

MAT'L

STEEL

68-72

AT1028T: TRANSMISSION COOLER LINES (T-350)

$45 + $75 Core

68-72

AT5648T: TRANSMISSION COOLER LINES (T-400)

$45 + $75 Core

TRANSMISSION VACUUM LINES

68-72

AT1033T: TRANSMISSION VACUUM LINES (T-350)

$29 + $39 Core

68-72

AT5649T: TRANSMISSION VACUUM LINES (T-400)

$29 + $39 Core

TRANSMISSION PAN

NEW FACTORY TURBO 400 TRANSMISSION PAN

67-75

AT4701Z: TRANSMISSION PAN - TURBO 400

$95

FLYWHEELS - AUTOMATIC TRANS

68-78

AT5665T: FLYWHEEL (G105) ENGINE SIZE: 350 / 400 / 403 / 455 REPLACES OEM # 560712

$59

SPEEDOMETER GEARS - AUTOMATIC

64-81

AT6322Z: LIGHT GREEN AUTOMATIC SPEEDOMETER GEAR (34 TOOTH)

$15



64-81	AT6323Z: ORANGE AUTOMATIC SPEEDOMETER GEAR (35 TOOTH)	$15
64-81	AT6324Z: WHITE AUTOMATIC SPEEDOMETER GEAR (36 TOOTH)	$15
64-81	AT6325Z: RED AUTOMATIC SPEEDOMETER GEAR (37 TOOTH)	$15
64-81	AT6326Z: BLUE AUTOMATIC SPEEDOMETER GEAR (38 TOOTH)	$15

64-81	AT6327Z: BROWN AUTOMATIC SPEEDOMETER GEAR (39 TOOTH)	$15

64-81	AT6328Z: BLACK AUTOMATIC SPEEDOMETER GEAR (40 TOOTH)	$15

64-81	AT6329Z: YELLOW AUTOMATIC SPEEDOMETER GEAR (41 TOOTH)	$15

64-81	AT6330Z: GREEN AUTOMATIC SPEEDOMETER GEAR (42 TOOTH)	$15
64-81	AT6331Z: PURPLE AUTOMATIC SPEEDOMETER GEAR (43 TOOTH)	$15

64-81	AT6332Z: GRAY AUTOMATIC SPEEDOMETER GEAR (44 TOOTH)	$15
64-81	AT6333Z: LIGHT BLUE AUTOMATIC SPEEDOMETER GEAR (45 TOOTH)	$15

CROSSMEMBER BRACKETS & INSULATORS

64-72	AT6544Z: CROSSMEMBER BRACKETS(PR) - THESE HOLD EACH END OF THE CROSSMEMBER AND BOLT TO THE FRAME. THEY USE RUBBER INSULATORS TO ISOLATE THE CROSSMEMBER FROM THE FRAME	$39

64-72	AT6545Z: CROSSMEMBER INSULATORS (RUBBER) - PR - THESE INSULATORS ISOLATE THE CROSSMEMBER FROM THE FRAME. THEY INSTALL ON EACH END OF THE CROSSMEMBER	$19

12.0 MANUAL TRANSMISSION & RELATED PARTS


MANUAL TRANSMISSION CONVERSION KIT
COMPLETE CHANGE OVER KIT TO CONVERSION KIT TO CHANGE AN AUTOMATIC TRANSMISSION CAR TO A MANUAL TRANSMISSION. THIS KIT IS EVERYTHING YOU NEED MINUS A CLUTCH, FLYWHEEL, BELL HOUSING, SHIFTER, LINKAGE AND TRANSMISSION. THIS KIT USES HIGH QUALITY REPRODUCTION COMPONENTS BUILT JUST LIKE GENERAL MOTORS. THIS IS NOT A GENERIC ONE SIZE FITS ALL KIT, IT IS SPECIFIC TO YOUR APPLICATION.

70-72	MT10110T: MANUAL TRANSMISSION CONVERSION KIT - KIT INCLUDES: BRAKE AND CLUTCH PEDALS, Z-BAR, CLUTCH PEDAL PUSHROD, PEDAL PUSHROD BOOT & RETAINER, CLUTCH FORK BOOT, CLUTCH FORK, ADJUSTABLE CLUTCH FORK PUSHROD, CLUTCH FORK BALL, CLUTCH RETURN SPRING(S), Z-BAR FRAME BRACKET, Z-BAR HARDWARE KIT (CONTAINING AN ENGINE BALL STUD, FRAME SIDE BALL STUD, 1 SPRING CLIP, 1 FELT WASHER, 2 NYLON BUSHINGS, LOCK WASHER & NUT)	$289

TRANSMISSION 4-SPEED
REBUILT TO ALL OEM STANDARDS
70-74	MT3611T: M-20 HEAVY DUTY 26/32 SPLINE	$1395
70-74	MT3612T: M-21 HEAVY DUTY 26/32 SPLINE	$1395
70-74	MT3614T: M-22 (ROCK CRUSHER) 26/32 SPLINE	$2300
70-87	MT4972T: BORG WARNER SUPER T-10 ALUMINUM ANY RATIO 26/32 SPLINE	$1295
70-87	MT4973T: BORG WARNER SUPER T-10 IRON CASE 2.64/2.88 RATIO 26/32 SPLINE	$1395

TRANSMISSION MOUNT
64-79	MT3615T: MANUAL TRANSMISSION RUBBER MOUNT	$29

TRANSMISSION TAGS

71-72	MT8848Z: MANUAL TRANSMISSION TAG (3974484WN) - FOR GM MODELS EQUIPPED WITH AN M-20. THE PART NUMBER IS STAMPED FROM THE BACKSIDE; THE RAISED ID NUMBER ON THE FRONT READS 3974484WN	$19

BELL CRANKS (Z-BAR)

70-72	MT5503T: BELL CRANK	$59

CLUTCH BELL CRANK FRAME BRACKETS
STAMPED BRACKET THAT SUPPORTS CLUTCH BELLCRANK. REQUIRED FOR 4 SPEED CONVERSION.

68-72	MT2108Z: BELL CRANK FRAME BRACKET (BOLTS TO FRAME)	$14


BALL STUDS - ENGINE AND FRAME
64-87	MT3623T: ENGINE BALL STUD	$10
64-87	MT3624T: FRAME BRACKET BALL STUD	$7

BELL CRANK HARDWARE

64-87	MT6462Z: BALL STUD NYLON WASHER (MOUNTS IN BELL CRANK) - EA	$2

64-87	MT6511Z: BALL STUD SEAL - EA	$4

64-87	MT6622Z: SPRING CLIP - EA	$2

64-87	MT6789Z: BELL CRANK HARDWARE KIT (INCLUDES ENGINE BALL, FRAME BALL, 2 NYLON WASHERS, 2 FELT WASHERS, RETAINING CLIP, WASHER & NUT)	$29

CLUTCH SPRINGS
68-72	MT3630T: CLUTCH SPRING - EA	$6

PEDAL ASSEMBLIES

68-72	MT3633Z: CLUTCH & BRAKE PEDAL ASSEMBLY (BOLT STYLE) - THIS IS NOT THE CHEVELLE STYLE THAT A LOT OF OTHERS SELL FOR ALL A-BODY MODELS, BUT CORRECT BOLT ON STYLE PEDAL. NO NEED TO REPLACE YOUR UPPER BRACKET; THESE ATTACH TO YOUR AUTOMATIC OR MANUAL SUPPORT BRACKET - THIS IS ALREADY IN YOUR CAR	$89
68-72	MT5654T: PEDAL BUSHING KIT	$10

CLUTCH PEDAL BUSHINGS
64-87	MT9723T: CLUTCH PEDAL BUSHING - EA	$1.50

REVERSE LOCKOUT ASSEMBLY
PARTS ARE SUPPLIED TO MOUNT ON TRANS ONLY. INCLUDES REVERSE ROD, TAB, BRACKET AND LEVER.

69-72	MT4942Z: MUNCIE REVERSE LOCKOUT ASSEMBLY - CORRECT FACTORY REVERSE LOCKOUT KIT USED ON ALL 4-SPEED M20 / M21 / M22 TRANSMISSIONS	$99

FIREWALL CLUTCH ROD BOOTS
68-72	MT3637T: FIREWALL CLUTCH ROD BOOT	$10

ROD BOOT RETAINER PLATE
68-72	MT3639T: ROD BOOT RETAINER PLATE	$15

CLUTCH PEDAL RODS
ROD GOES FROM CLUTCH PEDAL TO BELL CRANK

68-72	MT2711Z: CLUTCH PEDAL ROD 14 7/8" - 100% CORRECT. THESE ARE HARDENED STEEL WITH CORRECT OFFSET. THESE RODS GO FROM THE Z BAR TO THE CLUTCH PEDAL. THEY FEATURE A SILVER ZINC PLATED FINISH	$29

CLUTCH KITS
INCLUDES CLUTCH PRESSURE PLATE AND RELEASE BEARING


64-87	MT3644T: CLUTCH KIT - 11" COARSE SPLINE	$199
64-87	MT5212T: CLUTCH KIT - 10 1/2" FINE SPLINE	$199
64-87	MT5213T: CLUTCH KIT - 11" FINE SPLINE	$199
64-87	MT5214T: CLUTCH KIT - 10 1/2" COARSE SPLINE	$199

FLYWHEELS - MANUAL TRANS
68-72	MT3646T: FLYWHEEL MANUAL TRANSMISSION NEW	$279
64-87	MT3647T: FLYWHEEL BOLT KIT	$25

BELL HOUSINGS

65-79	MT2968Z: BELL HOUSING - WE'VE REPRODUCED THE CORRECT ALL ALUMINUM BELL HOUSING. WILL WORK WITH MUNCIE, SAGINAW AND BORG WARNER TRANSMISSIONS. THIS IS THE CORRECT BELL HOUSING FOR 8 CYLINDER ENGINES: 326 / 350 / 389 / 400 AND 455. THIS IS HIGH QUALITY ALUMINUM JUST AS GM MADE IT. NUMBER ON BELL HOUSING IS 9778882	$189

BELL HOUSING INSPECTION COVER
64-77	MT3649T: INSPECTION COVER WITH STANDARD HOLE ON DRIVER SIDE	$39

INSPECTION COVER SCREW KIT

64-87	MT5401Z: INSPECTION COVER SCREW KIT - 4	$4

BELL HOUSING BOLT SET

64-81	MT6413Z: BELL HOUSING BOLT KIT - 6 PIECES (ATTACHES BELL HOUSING TO ENGINE BLOCK)	$9

64-81	MT6415Z: TRANSMISSION BOLT KIT - 4 PIECES (ATTACHES TRANSMISSSION TO BELL HOUSING)	$6.95

BELL HOUSING BALL STUD

64-87	MT1427Z: MANUAL TRANSMISSION BELL HOUSING BALL STUD - THIS IS GM # 3729000. THESE HAVE BEEN DISCONTINUED BY GM. IT SCREWS INTO THE BELL HOUSING AND THE CLUTCH FORK PIVOTS ON IT. IT TIGHTENS WITH AN ALLEN WRENCH.	$9

CLUTCH FORKS & RELATED ITEMS

64-74	MT2719Z: CLUTCH FORK - REPLACES GM # 9787069. THIS IS NOT A UNIVERSAL STYLE CHEVY CLUTCH FORK; THIS IS AN OEM FORK FEATURING THE CORRECT LENGTH, CENTER PUSHROD HOLE, AND THE CORRECT OFFSET. YOU CAN NOW HAVE THE CORRECT CLUTCH FORK FOR YOUR CAR SO THE Z BAR AND LINKAGE ALL WORK CORRECTLY	$59
64-88	MT3701Z: CLUTCH FORK ADJUSTABLE PUSH ROD KIT ADJUSTS FROM 6-3/4" TO 8" (INCLUDES 90° ROD, THREADED SHAFT & JAMB NUT)	$18


64-88	MT10479T: CLUTCH FORK ADJUSTABLE PUSH ROD KIT ADJUSTS FROM 3" TO 6" (INCLUDES THREADED SHAFT & SWIVEL BLOCK)	$18
64-77	MT3652T: CLUTCH FORK BALL STUD	$10
64-87	MT3653T: CLUTCH FORK BOOT	$10

PILOT BEARING (SPECIAL)
THIS BEARING IS A MUST FOR DOING A CONVERSION TO A MANUAL TRANS. THIS WILL ALLOW YOU TO USE YOUR ORIGINAL AUTOMATIC CRANK SHAFT TO CONVERT IT TO A MANUAL TRANS WITHOUT DRILLING IT OUT
64-72	MT3654T: PILOT BEARING	$39

DRIVE SHAFT YOKES
64-72	MT3655T: 27 SPLINE DRIVE SHAFT SLIP YOKE WITH 1.50" SEAL DIAMETER SY3R-3500, 5.50" CENTER OF U-JOINT TO END - INSIDE SNAPRING DESIGN	$89
64-72	MT3656T: 27 SPLINE DRIVE SHAFT SLIP YOKE WITH 1.50" SEAL DIAMETER SY1310-3550, 5.469" CENTER OF U-JOINT TO END - OUTSIDE SNAPRING DESIGN	$89
64-72	MT5248T: 32 SPLINE DRIVE SHAFT SLIP YOKE WITH 1.885" SEAL DIAMETER SY1310-4000, 5.50" CENTER OF U-JOINT TO END - OUTSIDE SNAPRING DESIGN	$89
64-72	MT5249T: 32 SPLINE DRIVE SHAFT SLIP YOKE WITH 1.885" SEAL DIAMETER SY3R-4000, 5.50" CENTER OF U-JOINT TO END - INSIDE SNAPRING DESIGN	$89

DRIVE SHAFTS
NEW FACTORY TAPERED DOWN SWEDGED DRIVESHAFT. THESE NEW DRIVESHAFTS FEATURE THE SAME SHAPE AND DESIGN AS GM, UNLIKE THE AFTERMARKET STRAIGHT TUBING. THESE DRIVESHAFTS HAVE TAPERED DOWN TUBES ON EITHER END. THE DRIVESHAFT TUBES ARE SEMI-POLISHED BARE STEEL, FULLY MACHINE WELDED, END CAPS WITH FACTORY STYLE BLUING ON THE ENDS, THEN CLEAR COATED TO PRESERVE THE NATURAL APPEARANCE. TOTALLY BALANCED, THEY COME COMPLETE WITH NEW SLIP YOKE AND FULLY GREASABLE U JOINTS. MOUNTS ON THE YOKE OF YOUR REAR END.
LENGTHS ARE MEASURED CENTER TO CENTER OF REAR U JOINTS, OF WHICH WE OFFER TWO STYLES: 1310 AND 1330. THE MEASUREMENT OF THE YOKE OF YOUR REAR END IS REQUIRED TO GET THE PROPER FIT OF THE DRIVESHAFT. YOU WILL NEED TO KNOW THREE THINGS TO PURCHASE THE PROPER DRIVESHAFT: 1) THE LENGTH OF YOUR DRIVESHAFT CENTER TO CENTER; 2) THE SLIP YOKE STYLE; 3) THE U JOINT TYPE, EITHER 1310 OR 1330. THE 1310 MEASURES 3 1/4" FROM CAP TO CAP; THE 1330 MEASURES 3 5/8" FROM CAP TO CAP.
68-72	MT3657T: DRIVESHAFT HEAVY DUTY - WITH 32 SPLINE YOKE, TURBO 400 TRANSMISSIONS. MEASURES 54 1/2" AND COMES WITH 1310 REAR U JOINT WHICH MEASURES 3 1/4" CAP TO CAP.	$399


68-72	MT5692T: DRIVESHAFT HEAVY DUTY - WITH 32 SPLINE YOKE, TURBO 400 TRANSMISSIONS. MEASURES 54 1/2" AND COMES WITH 1330 REAR U JOINT WHICH MEASURES 3 5/8" CAP TO CAP.	$399
68-72	MT5693T: DRIVESHAFT STANDARD DUTY - WITH 27 SPLINE YOKE, M20, M21, M22, TURBO 350, POWER GLIDE TRANSMISSIONS. MEASURES 55 1/2" AND COMES WITH 1310 REAR U JOINT WHICH MEASURES 3 1/4" CAP TO CAP.	$399
68-72	MT5694T: DRIVESHAFT HEAVY DUTY - WITH 32 SPLINE YOKE (M22), SOME TURBO 400 TRANSMISSIONS. MEASURES 55 1/2" AND COMES WITH 1330 REAR U JOINT WHICH MEASURES 3 5/8" CAP TO CAP, SAME AS LS5, LS6, GTO, GS, ETC.	$399
68-72	MT5695T: DRIVESHAFT HEAVY DUTY - WITH 32 SPLINE YOKE (M22), SOME TURBO 400 TRANSMISSIONS. MEASURES 55 1/2" AND COMES WITH 1310 REAR U JOINT WHICH MEASURES 3 1/4" CAP TO CAP, SAME AS LS5, LS6, GTO, GS, ETC.	$399

SPEEDOMETER GEAR ADAPTER SLEEVE
ADAPTIVE SLEEVE MOUNTS IN SIDE OF TRANS THAT SPEEDOMETER CABLE ATTACHES TO. HOLDS SPEEDOMETER DRIVEN GEAR.
68-75	MT5752T: SPEEDOMETER GEAR ADAPTER SLEEVE FOR MANUAL TRANS	$24

SPEEDOMETER GEARS - MANUAL
64-81	MT7411Z: PURPLE MANUAL SPEEDOMETER GEAR (17 TOOTH)	$12
64-81	MT7412Z: BROWN MANUAL SPEEDOMETER GEAR (18 TOOTH)	$12

64-81	MT7413Z: NATURAL MANUAL SPEEDOMETER GEAR (19 TOOTH)	$12

64-81	MT7414Z: BLUE MANUAL SPEEDOMETER GEAR (20 TOOTH)	$12

64-81	MT7415Z: RED MANUAL SPEEDOMETER GEAR (21 TOOTH)	$12

64-81	MT7416Z: GRAY MANUAL SPEEDOMETER GEAR (22 TOOTH)	$12

64-81	MT7417Z: GREEN MANUAL SPEEDOMETER GEAR (22 TOOTH)	$12

64-81	MT7418Z: BLACK MANUAL SPEEDOMETER GEAR (23 TOOTH)	$12

64-81	MT7419Z: YELLOW MANUAL SPEEDOMETER GEAR (24 TOOTH)	$12

64-81	MT7420Z: ORANGE MANUAL SPEEDOMETER GEAR (25 TOOTH)	$12

CROSSMEMBER BRACKETS & INSULATORS

64-72	AT6544Z: CROSSMEMBER BRACKETS(PR) - THESE HOLD EACH END OF THE CROSSMEMBER AND BOLT TO THE FRAME. THEY USE RUBBER INSULATORS TO ISOLATE THE CROSSMEMBER FROM THE FRAME	$39

64-72	AT6545Z: CROSSMEMBER INSULATORS (RUBBER) - PR - THESE INSULATORS ISOLATE THE CROSSMEMBER FROM THE FRAME. THEY INSTALL ON EACH END OF THE CROSSMEMBER	$19

13.0 EMBLEMS


GRILLE EMBLEMS

71-72	EM2418T: CUTLASS GRILLE SCRIPT "OLDSMOBILE" (FITS 1971 "S" MODELS & 1972 ALL EXCEPT 442)	$29

72	EM2419T: 442 GRILLE NUMERALS (3/SET) (RED)	$29

HOOD EMBLEMS

71-72	EM2430T: CUTLASS HOOD SCRIPT "OLDSMOBILE"	$29

72	EM2431T: CUTLASS STONESHIELD EMBLEM "ROCKET"	$25

FENDER EMBLEMS

69-73	EM2444T: CUTLASS FENDER EMBLEM "4" - EA	$12

69-73	EM2445T: CUTLASS FENDER EMBLEM "2" - EA	$12

69-73	EM2446T: CUTLASS FENDER EMBLEM "442" SET (2 SETS NEEDED PER CAR)	$29

69-77	EM2447T: CUTLASS FRONT FENDER EMBLEM "HURST OLDS" DIE CAST (RED/BLACK) - EA	$39

69-77	EM2448T: CUTLASS FRONT FENDER EMBLEM "HURST OLDS" PLASTIC (RED/BLACK) - EA	$39

70-72	EM2450T: W-30 FRONT FENDER - EA	$19

71-72	EM2453T: CUTLASS FENDER EMBLEM "CUTLASS" SCRIPT - EA	$25

72	EM2454T: CUTLASS "S" FRONT FENDER EMBLEM - EA	$20

DASH AND GLOVEBOX EMBLEMS

70-72	EM2460T: 442 GLOVEBOX EMBLEM	$24

70-72	EM9601T: CUTLASS GLOVEBOX EMBLEM	$21

70-72	EM9602T: CUTLASS SUPREME GLOVEBOX EMBLEM	$23

72	EM2461T: H/O DASH PLAQUE MOUNTS ON GLOVEBOX	$89

DOOR PANEL EMBLEM

70-72	EM9596T: DOOR PANEL ROCKET EMBLEM (442) - EA	$19

TRUNK OR REAR BODY PANEL EMBLEMS

69-72	EM2473T: CUTLASS TRUNK EMBLEM "442" SET	$34

69-77	EM2474T: "HURST OLDS" TRUNK DIECAST EMBLEM (RED/BLACK)	$39

69-77	EM2475T: "HURST OLDS" TRUNK PLASTIC EMBLEM (RED/BLACK)	$39

71-72	EM2479T: CUTLASS SUPREME TRUNK LETTERS "OLDSMOBILE" SET	$42

71-72	EM2480T: "CUTLASS" TRUNK SCRIPT	$24.50


ROOF PANEL EMBLEMS

70-72	EM8429T: C/S ROOF PANEL EMBLEM (FOR SUPREME MODELS)	$27

HURST EQUIPPED EMBLEM
FOR USE ON INTERIOR OR EXTERIOR

	EM4728Z: HURST EQUIPPED EMBLEM - DIE CAST	$24

	EM4729Z: HURST EQUIPPED EMBLEM - STICK ON	$19

EMBLEM KITS
NEW SET OF 442 EMBLEMS, THE SAME FACTORY STYLE EMBLEMS THAT GM PUT ON THE CAR WHEN IT WAS GOING DOWN THE ASSEMBLY LINE

72	EM5736T: 442 EMBLEM KIT GRILLE FENDER TRUNK - INCLUDES 1 442 GRILLE EMBLEM, 2 442 FENDER EMBLEMS AND 1 442 TRUNK LID EMBLEM	$119

EMBLEM TEMPLATE KIT
FENDER AND TRUNK LID EMBLEM TEMPLATE KIT TO POSITION 442 AND W-30 EMBLEMS ON THE FENDER AND TRUNK LID. IT IS A FULL DECAL THAT GETS ATTACHED TO THE FENDER OR DECK LID. COMES WITH HARDTOP AND CONVERTIBLE PATTERN. HOLES ARE PUNCHED, ENABLING YOU TO POSITION THEM SO YOU KNOW WHERE TO DRILL, MAKING IT EASY TO PLACE THE EMBLEM IN THE FACTORY POSITION WITHOUT MEASURING OR DRILLING THE HOLES CROOKED. YOU WILL NOW BE ABLE TO PLACE THE DECAL ON YOUR FENDER OR TRUNK LID, DRILL THE HOLES AND PEEL THE DECAL OFF. REMEMBER, IT IS ALWAYS A GOOD IDEA TO DO THIS BEFORE THE CAR IS PAINTED.

70-72	EM4740T: FENDER & TRUNK EMBLEM TEMPLATE KIT	$45

14.0 CARBURETORS & RELATED PARTS


AIR CLEANER COMPONENTS

64-77	CB10779Z: BREATHER FILTER (FIBER FILTER WITH PLASTIC NIPPLE THAT MOUNTS INSIDE AIR CLEANER BASE AND ATTACHES TO BREATHER IN VALVE COVER) - EA	$4

68-72	CB10780Z: THERMAL AIR INTAKE VACUUM SENSOR (COLD START SENSOR THAT MOUNTS IN AIR CLEANER BASE) - EA	$28

CARBURETORS - REMANUFACTURED DELCO
THESE CARBURETORS ARE ORIGINAL CARBS THAT HAVE BEEN REMANUFACTURED & RECOLORED TO GM DELCO SPECIFICATIONS. SOME HAVE BEEN RESTAMPED TO FACTORY NUMBERS. MOST OF THEM ARE SPECIAL ORDER - PLEASE ALLOW 2 - 5 WEEKS FOR DELIVERY. WORK ON AN EXCHANGE BASIS - $649 OUTRIGHT OR $549 IF YOU HAVE YOUR OLD ONE TO SEND BACK
72	CB5619T: REMANUFACTURED CARBURETOR 350 CAST #7042250 (CORE CHARGE $100)	$549
72	CB5620T: REMANUFACTURED CARBURETOR 455 CAST #7042251 (CORE CHARGE $100)	$549
72	CB5621T: REMANUFACTURED CARBURETOR 455 442 WITH MANUAL TRANS CAST #7042953 (CORE CHARGE $100)	$549

CARBURETOR BOLTS (QUADRAJET)
BOLTS HOLD THE CARBURETOR TO THE INTAKE ON 4BBL CARS
64-72	CB9626T: QUADRAJET CARBURETOR TO INTAKE BOLTS 4BBL - 4 PIECE SET	$16.95

FUEL BOWL SCREW
FITS ALL HOLLEY CARBURETORS CORRECT STANDARD SCREW BLADED STYLE
64-87	CB4875T: FUEL BOWL SCREW - SET OF 8	$16

THROTTLE RETURN SPRING

69-72	CB10124T: CARB THROTTLE RETURN SPRING - CORRECT CARBURETOR THROTTLE RETURN SPRING FOR YOU 69-72 CUTLASS. IT INSTALLS FROM THE THROTTLE CABLE BRACKET TO THE LINKAGE ON CARBURETOR. THIS FACTORY STYLE THROTTLE SPRING IS SPECIFIC TO THE APPLICATION AND NOT A UNIVERSAL. THIS WILL ASSURE YOUR PEDAL AS THE CORRECT PRESSURE, LIKE THE DAY IT ROLLED OFF THE ASSEMBLY LINE	$5

INTAKE MANIFOLDS

71-72	CB1510T: W-30 MANIFOLD ALUMINUM CAST #407570 WITH THE WORD (OLDS W-455) - NEW REPRODUCTION	$549

STOCK CAST IRON MANIFOLDS
71-72	CB1517T: 4 BB MANIFOLDS	$CALL


INTAKE WATER NIPPLE (REAR OF INTAKE)
71-72	CB10728T: REAR INTAKE WATER NIPPLE (NO A/C) - THIS IS THE WATER NIPPLE THAT THREADS INTO THE BACK OF THE INTAKE FOR THE HEATER HOSE ON NON AIR CONDITIONED CARS. THIS TAKES THE PLACE OF THE HEATER CONTROL VALVE ON AIR CONDITIONED CARS. GM OEM STYLE BRASS 3/4" PIPE THREAD WITH 5/8" BARB FITTING	$19

CHOKE THERMOSTAT
MOUNTS IN INTAKE MANIFOLD

CHOKE TUBES

70-72	CB1520T: CHOKE TUBE & HOUSING (MOUNTS IN INTAKE 455)	$59
70-72	CB1521T: CHOKE TUBE & HOUSING (MOUNTS IN INTAKE 350)	$29

70-74	CB1522T: ACH7040 350 CI 4 BBL CHOKE TUBE (RUNS FROM REAR OF CARBURETOR TO STOVE ON MANIFOLD)	$9

70-74	CB1523T: ACH7041 455 CI 4 BBL CHOKE TUBE (CLEAN AIR) RUNS FROM THERMOSTAT HOUSING TO STOVE ON MANIFOLD	$9

70-72	CB1524T: ACH7042 455 CI 4 BBL CHOKE TUBE (HOT AIR) RUNS FROM THERMOSTAT HOUSING TO STOVE ON MANIFOLD	$9

70-74	CB1525T: ACH7043 350 CI 4 BBL CHOKE TUBE (HOT AIR) RUNS FROM THERMOSTAT HOUSING TO STOVE ON MANIFOLD	$9

70-72	CB1526T: ACH6844 350 CI 2 BBL CHOKE TUBE (CLEAN AIR) RUNS FROM REAR OF CARBURETOR TO STOVE ON MANIFOLD	$9

68-72	CB1527T: ACH6845 350 CI 2 BBL CHOKE TUBE (HOT AIR) RUNS FROM THERMOSTAT HOUSING TO STOVE ON MANIFOLD	$9
70-75	CB10502T: CHOKE TUBE GASKET IN INTAKE MANIFOLD	$5

FUEL FITTINGS (HOLLEY)

64-87	CB3595Z: HOLLEY FUEL FITTING 2627 8-20 IN. MALE 5/16" INSIDE THREAD - USED ON MOST ALL FACTORY APPLICATIONS THAT USE 5/16" FUEL LINE. THESE HAVE BEEN DISCONTINUED FROM HOLLEY AND ARE SOLD EACH. DUAL FEED CARBURETORS REQUIRE TWO	$8

CARBURETOR HEAT SHIELD (HOLLEY)
FITS ALL MODELS WITH HOLLEY CARBURETORS AND WILL HELP COOL THE INTAKE CHARGE FOR BETTER PERFORMANCE.
	CB5227T: HOLLEY CARBURETOR HEAT SHIELD	$29


VACUUM HOSE
	CB9594T: VACUUM HOSE (CORRECT WHITE STRIPE) 5/32" HOSE - SOLD PER FOOT	$3

14.1 RAM AIR/COWL INDUCTION


AIR CLEANER CHROME LID
64-88	CW9728T: AIR CLEANER SEAL (MOUNTS ON BOTTOM OF AIR CLEANER & INCLUDES 3M TAPE)	$7

COMPLETE KIT 68 OR 69 W30-W31
ADDS RAM AIR TO YOUR CAR

COMPLETE OAI LOWER AIR CLEANER KIT FOR 70-72

70-72	CW10102T: RAM AIR 350 SETUP COMPLETE WITH CARB PAN SALE - REGULAR PRICE - $599 - INCLUDES AN NOS AC366 AIR FILTER, METAL AIR FILTER LID, LOWER RAM AIR CLEANER, FOAM SEAL FOR 350, RAM AIR VACUUM MOTOR, 2 HOLD DOWN SPRINGS WITH BRACKETS. THIS UNIT IS AS CLOSE AS YOU CAN GET TO NOS GM PART. THE LOWER AIR CLEANER IS A REPRO THAT IS MADE JUST LIKE THE ORIGINAL WITH FACTORY DRAIN HOLES AND 2 PCV VENT HOLES	$499

70-72	CW10103T: RAM AIR 455 SETUP COMPLETE WITH CARB PAN SALE - REGULAR PRICE - $599 - INCLUDES AN NOS AC366 AIR FILTER, METAL AIR FILTER LID, LOWER RAM AIR CLEANER, FOAM SEAL FOR 455, RAM AIR VACUUM MOTOR, 2 HOLD DOWN SPRINGS WITH BRACKETS. THIS UNIT IS AS CLOSE AS YOU CAN GET TO NOS GM PART. THE LOWER AIR CLEANER IS A REPRO THAT IS MADE JUST LIKE THE ORIGINAL WITH FACTORY DRAIN HOLES AND 2 PCV VENT HOLES	$499

OAI RAM AIR CLEANER UPPER PLASTIC ASSEMBLY 70-72
70-72	CW5672T: OAI AIR CLEANER ASSEMBLY 350 ENGINE - INCLUDES UPPER PLASTIC PAN, FLAPPER DOOR, VACUUM MOTOR, FOAM SEAL, METAL LID & HOLD DOWN KIT. YOU MUST USE YOUR LOWER STEEL CARBURETOR PAN (MADE JUST LIKE GM - SHOW QUALITY)	$399
70-72	CW1778T: OAI AIR CLEANER ASSEMBLY 455 ENGINE - INCLUDES UPPER PLASTIC PAN, FLAPPER DOOR, VACUUM MOTOR, FOAM SEAL, METAL LID & HOLD DOWN KIT. YOU MUST USE YOUR LOWER STEEL CARBURETOR PAN (MADE JUST LIKE GM - SHOW QUALITY)	$399


OAI LOWER METAL AIR CLEANER BASE 70-72

70-72	CW5670T: OAI LOWER METAL AIR CLEANER BASE - CORRECT SNORKEL, 5 HOLES IN BASE, 2 HOLES WITH CORRECT ROLLED EDGE ON SIDE FOR PCV TUBE GROMMET WITH WORKING AUTO-THERM DIAPHRAGM. POWDER COATED BLACK TO A BEAUTIFUL FINISH. WORKS WITH ALL 4BBL ENGINES. PRE-SALE PRICE	$249

OAI COMPLETE AIR CLEANER INCL. BASE 70-72

70-72	CW5671T: OAI AIR CLEANER INCLUDES BASE COMPLETE 350 ENGINE - OAI AIR CLEANER ASSEMBLY INCLUDES UPPER PLASTIC PAN, LOWER METAL AIR CLEANER BASE, FLAPPER DOOR, VACUUM MOTOR, FOAM SEAL, METAL LID AND HOLD DOWN KIT (VACUUM & DRAIN HOSES NOT INCLUDED)	$599

70-72	CW5673T: OAI AIR CLEANER INCLUDES BASE COMPLETE 455 ENGINE - OAI AIR CLEANER ASSEMBLY INCLUDES UPPER PLASTIC PAN, LOWER METAL AIR CLEANER BASE, FLAPPER DOOR, VACUUM MOTOR, FOAM SEAL, METAL LID AND HOLD DOWN KIT (VACUUM & DRAIN HOSES NOT INCLUDED)	$599

OAI RAM AIR CLEANER COMPONENTS 70-72
70-72	CW1779T: FLAPPER DOOR ONLY	$49

70-72	CW1780T: VACUUM MOTOR ONLY	$59
70-72	CW1781T: OAI METAL AIR FILTER LID	$39

AIR CLEANER FOAM SEALS
SEAL THAT MOUNTS ON AIR CLEANER
70-72	CW1784T: AIR CLEANER FOAM SEAL (455)	$20
70-72	CW1785T: AIR CLEANER FOAM SEAL (350)	$20

AIR FILTER PLATE CHROME RETAINER
64-77	CW1786T: OEM STYLE WING NUT - EA	$4.50

AIR CLEANER CLAMP
OVAL SHAPED CLAMP THAT HOLDS HOSES TO THE AIR CLEANER

RAM AIR CLEANER HOLD DOWN KIT

70-72	CW10127T: RAM AIR CLEANER HOLD DOWN KIT - CORRECT HOLD DOWN BRACKETS AND SPRINGS FOR YOUR 70-72 CUTLASS WITH RAM AIR, AIR CLEANER TOP. THESE SPRINGS AND BRACKETS ARE USE TO HOLD THE RAM AIR FLAPPER LID IN PLACE	$18

AIR CLEANER HEAT DIAPHRAGM

68-72	CW8422Z: AIR CLEANER VACUUM ACTUATED HEAT DIAPHRAGM & BRACKET - THIS IS THE VACUUM MOTOR THAT IS USED ON MOST ALL GM AIR CLEANERS	$19

14.2 TRI-POWER ITEMS

15.0 FUEL TANKS, LINES & RELATED PARTS

GAS TANKS

FACTORY STYLE TANK - OEM APPROVED NI-TERNE STEEL, CORROSION RESISTANT, 100% TESTED. TANKS ARE FOR 2 DOOR CARS UNLESS OTHERWISE STATED. TANKS WITHOUT PART NUMBERS ARE FACTORY SHIPPED, PLEASE INQUIRE FOR APPLICATION.

70-72

FT2632T: GAS TANK WITH FILLER NECK & 3 VENTS (GM34R)

$199

GAS TANK SENDING UNIT

MOUNTS IN GAS TANK FOR FUEL LEVEL - INCLUDES FILTER

68-72

FT2640T: SENDING UNIT (1 LINE)

$69

68-72

FT2641T: SENDING UNIT (2 LINE)

$79

GAS TANK SENDING UNIT COMPONENTS

64-72

FT2645T: SENDING UNIT FILTER

$12

64-72

FT2646T: SENDING UNIT LOCKING CAM

64-72

FT2647T: SENDING UNIT GASKET

GAS TANK PAD

THIS IS THE LARGE RUBBER PAD THAT MOUNTS ON TOP OF THE GAS TANK.

68-72

FT2649T: GAS TANK PAD

$29

GAS TANK STRAPS

68-72

FT2651T: GAS TANK STRAPS - PR

$29

ANTI-SQUEAK KIT

64-72

FT4996T: ANTI-SQUEAK KIT

GAS TANK STRAP HARDWARE KIT

68-72

FT4604T: GAS TANK STRAP HARDWARE KIT (ALL EXCEPT WAGON)

$7.50

GAS CAPS

71-74

FT2656T: GAS CAP (PART #GC1049)

$15

FUEL LINE CLIP KITS

71-72

FT2664T: FUEL LINE CLIP KIT WITH 3/8" FUEL AND 5/16" VAPOR - 6 PIECES

$12

FUEL PUMP TO CARBURETOR LINES

ORIG

STAINLESS

MAT'L

STEEL

68-72

FT2668T: FUEL PUMP TO CARBURETOR LINES (8 CYLINDER WITH 2 BBL)

$18 + $25 Core

FT10513T: FUEL PUMP TO CARBURETOR LINES (W-30 ONLY 1 PC)

$25 + $35 Core

FT2674T: FUEL PUMP TO CARBURETOR LINES (455)

$18 + $25 Core

FT2675T: FUEL PUMP TO CARBURETOR LINES (350 4 BBL)

$18 + $25 Core

FUEL PUMPS

FT10032T: FUEL PUMP (40713) V8 5.7L 350(H,K) ENGINES

$49

FT10033T: FUEL PUMP (40712) V8 7.5L 455(U) ENGINE WITH A/C

$49

FT10034T: FUEL PUMP (40713) V8 7.5L 455(U) ENGINE WITHOUT A/C

$49

FT10035T: FUEL PUMP (40736) V8 7.5L 455(U) ENGINE WITH W-30 PACKAGE

$49

FT10036T: FUEL PUMP (40713) F-85 V8 5.7L 350 ENGINE

$49

FT10037T: FUEL PUMP (40712) F-85 V8 7.5L 455 ENGINE WITH A/C

$49

FT10038T: FUEL PUMP (40713) F-85 V8 7.5L 455 ENGINE WITHOUT A/C

$49

FT10039T: FUEL PUMP (40736) F-85 V8 7.5L 455 ENGINE WITH W-30 PACKAGE

$49

FRONT TO REAR FUEL LINES

ORIG

STAINLESS

MAT'L

STEEL

70-72

FT2692T: FRONT TO REAR FUEL LINES (3/8" MAIN LINE HARDTOP)

$65 + $100 Core

70-72

FT2693T: FRONT TO REAR FUEL LINES (1/4" RETURN LINE HARDTOP)

$65 + $100 Core

70-72

FT2694T: FRONT TO REAR FUEL LINES (3/8" MAIN LINE CONVERTIBLE)

$65 + $100 Core

70-72

FT2695T: FRONT TO REAR FUEL LINES (1/4" RETURN LINE CONVERTIBLE)

$65 + $100 Core

VAPOR RETURN LINE SETS

ORIG

STAINLESS

MAT'L

STEEL

71-72

FT2700T: VAPOR RETURN LINE SET (HARDTOP) - 4 PIECES

$99 + $139 Core

71-72

FT2701T: VAPOR RETURN LINE SET (CONVERTIBLE) - 4 PIECES

$99 + $139 Core

FUEL FILTER

71-72

FT3107Z: W30 FACTORY FUEL FILTER GF432 (MOUNTS INLINE WITH FUEL PUMP) - FOR CARS WITH RETURN LINE - NEW FACTORY DELCO FUEL FILTER IS THE CORRECT SIZE (MEASURES 1.89" X 2.75")

$49

FUEL INJECTION GAS TANKS

1ST TIME EVER - A NEW INJECTION FUEL TANK MANUFACTURED TO FACTORY SPECS. NO CUTTING, NO SEAMS OTHER THAN FACTORY PROFESSIONAL MANUFACTURING. THIS TANK UTILIZES THE FACTORY TANK WITH NEW ELECTRIC PUMP IN TANK THAT PRODUCES 85-115 PSI AT 50-60 GALLONS PER HOUR. IT WILL ALLOW YOU TO USE ANY LATE MODEL FUEL INJECTION MOTOR. THIS TANK IS READY TO GO, DESIGNED TO WORK WITH ANY 12 VOLT SYSTEM, AND SENDING UNIT IS DESIGNED FOR ANY FACTORY APPLICATIONS. THESE TANKS MAY BE IN STOCK, BUT MAY TAKE UP TO 2 WEEKS TO RECEIVE. MANUFACTURED WITH CORRECT FUEL NECK AND FITTINGS.

70-72

FT9567T: FUEL INJECTION TANK WITH EEC, WITH 3 VENTS (GM34RFI)

$449

16.0 BRAKES, LINES & RELATED PARTS


FRONT DISC BRAKE CONVERSION KITS
KIT WILL CONVERT ANY DRUM BRAKE CAR TO FRONT DISC. INCLUDES ALL RELATED PARTS.
64-72	BR1385T: POWER DISC BRAKE CONVERSION KIT INCLUDES BOOSTER	$899
64-72	BR1386T: POWER DISC BRAKE CONVERSION KIT FOR CAR WITH POWER DRUM BRAKES (DOES NOT INCLUDE BOOSTER)	$749
KIT INCLUDES SPINDLES, ROTORS, CALIPERS (SINGLE PISTON STYLE), PADS, BEARING SEALS, PINS, MOUNTING BRACKETS, MASTER CYLINDER, HOSES, PROPORTIONING VALVE, CONVERSION LINE KIT, CADMIUM PLATED BRAKE BOOSTER & BACKING PLATES

DISC BRAKE CONVERSION KIT (HARD PARTS)

64-72	BR1392Z: DISC BRAKE CONVERSION KIT - HARD PARTS! KIT INCLUDES 2 SPINDLES, 2 SPECIAL CALIPER BOLTS, 2 BACKING PLATES, 2 DUST COVER CAPS, & 2 CALIPER MOUNTING BRACKETS HARD PART DISC BRAKE CONVERSION KIT	$279

REAR DISC BRAKE CONVERSION KIT
THIS KIT WILL TURN YOUR REAR DRUMS INTO DISC BRAKES
64-72	BR1387T: REAR DISC BRAKE CONVERSION KIT (INCLUDES 2 ROTORS, 2 CALIPERS, 4 MOUNTING BRACKETS, 1 BRAKE PAD, 2 BRAKE HOSES & 2 REAR PARKING BRAKE CABLES)	$699

DISC BRAKE HOSE BRACKETS
EXACT REPRODUCTION FOLD OVER DOUBLE THICKNESS DISC BRAKE ONLY HOSE BRACKET - A MUST WHEN CONVERTING TO DISC BRAKES. DRUM BRAKE BRACKET IS A SINGLE THICKNESS AND WILL NEED TO BE CHANGED WHEN CONVERTING TO DISC BRAKES BECAUSE IF NOT, THE HOSE WILL FIT LOOSE IN THE HOLE AND THE FLEX HOSE CLIP WILL NOT SECURELY HOLD THE HOSE IN PLACE.

68-72	BR5329Z: DISC BRAKE HOSE BRACKETS - PR	$28

POWER BRAKE BOOSTERS
NEW! DELCO MORAINE POWER BRAKE BOOSTER NEW!
LICENSED GM RESORATION PART. HAS SHOW QUALITY PLATING IN IRIDESCENT GOLD. HAS DELCO MORAINE STAMPED ON FACE. COMES WITH BOTH PUSH RODS FOR BOTH STYLE MASTER CYLINDERS. NO CORE IS NECESSARY. INCLUDES BOOSTER SLEEVE. MADE IN THE USA!!

67-72	BR1426Z: NEW DELCO MORAINE POWER BRAKE BOOSTER	$249


67-72	BR1427Z: NEW POWER BRAKE BOOSTER (WITHOUT DELCO MORAINE STAMP)	$199
GOLD CADMIUM PLATED


67-72	BR1413T: POWER BRAKE BOOSTER - GOLD CADMIUM PLATED (CORE CHARGE $50)	$229


FACTORY STYLE BOOSTER GOLD CADMIUM PLATED - WORKS ON AN EXCHANGE BASIS

PAINTED BLACK
67-72	BR1415T: POWER BRAKE BOOSTER - PAINTED BLACK (CORE CHARGE $50)	$129
FACTORY STYLE BOOSTER PAINTED BLACK - WORKS ON AN EXCHANGE BASIS

POWER BRAKE BOOSTER SLEEVE
THIS IS THE OFF WHITE PLASTIC SLEEVE THAT GOES BETWEENTHE BOOSTER AND THE FIREWALL COMMONLY MISSING OR DRY ROTTED OUT FITS ALL YEARS
64-77	BR1416T: POWER BOOSTER PLASTIC SLEEVE	$10

POWER BRAKE BOOSTER ROD
THIS IS THE ROD THAT GOES BETWEEN THE POWER BRAKE BOOSTER AND MASTER CYLINDER

67-72	BR3142Z: POWER BRAKE BOOSTER ROD	$9.95

POWER BRAKE BOOSTER VALVE & GROMMET
CHECK VALVE, VALVE WITH GROMMET THAT MOUNTS ON THE BOOSTER
64-77	BR5377T: POWER BRAKE BOOSTER VALVE & GROMMET	$12

POWER BRAKE TUBE & HOSE KIT
METAL LINE & RUBBER HOSE THAT RUNS FROM THE INTAKE MANIFOLD TO THE POWER BRAKE BOOSTER TO PROVIDE THE VACUUM FOR THE POWER BRAKE UNIT. ASSEMBLY INCLUDES THE M