PLASTIC ACCELERATOR CONTROL CABLE RETAINER THAT HOLDS THE CABLE TO THE ACCELERATOR PEDAL

( - Firebird/TransAm) ACCELERATOR CONTROL CABLE RETAINER

$4.50

(1967 - 1977 Firebird/TransAm) PCV BREATHER FILTER (FIBER FILTER WITH PLASTIC NIPPLE THAT MOUNTS INSIDE AIR CLEANER BASE AND ATTACHES TO BREATHER IN VALVE COVER) - EA

$4.00

MOUNTS ON AIR CLEANER AND CONVERTS THE OVAL HOLE ON AIR CLEANER TO A ROUND END TO ATTACH THE AIR DUCT HOSE TO IT. THE OTHER END ATTACHES TO THE FENDER AIR SCOOP. REPLACES GM # 487061. IT HAS A 2" X 6" WIDE OPENING AT AIR CLEANER. IT CONVERTS TO A 4" ROUND HOSE MADE OF ABS PLASTIC.

(1973 - 1981 Firebird/TransAm) AIR CLEANER DUCT HOUSING / ADAPTER

$49.00

(1967 - 1988 Firebird/TransAm) AIR CLEANER SEAL (MOUNTS ON BOTTOM OF AIR CLEANER & INCLUDES 3M TAPE)

$7.00

(1967 - 1975 Firebird/TransAm) BLACK AIR CLEANER LID (CORRECT STYLE) STANDARD

$39.00

(1967 - 1975 Firebird/TransAm) CHROME AIR CLEANER LID (CORRECT STYLE) STANDARD

$59.00

(1973 - 1981 Firebird/TransAm) AIR CLEANER TO FENDER WELL DUCTING - GM NOS (ACCORDIAN STYLE FLEXIBLE PLASTIC HOSE WITH WIRE REINFORCEMENT. 4" DIAMETER WITH PLASTIC CLAMPS AT BOTH ENDS. 17" LONG FULLY EXTENDED)

Call

(1973 - 1981 Firebird/TransAm) FENDER WELL ADAPTER DUCT (CONVERTS TRIANGLE DUCT TO ROUND DUCT FOR AIR CLEANER)

$49.00

(1973 - 1981 Firebird/TransAm) AIR CLEANER TO FENDER WELL DUCTING - REPRODUCTION (NEW DUCT HOSE REPRODUCTION OF THE PLASTIC 4" HOSE THAT GOES FROM THE AIR CLEANER TO THE INNER FENDER PLASTIC AIR INTAKE ADAPTER. BLACK PLASTIC WITH HELIX WIRING WOUND INSIDE)

$39.00

(1973 - 1981 Firebird/TransAm) FENDER WELL DUCT (CONNECTS TO TRIANGLE DUCT GOES INTO FENDER)

$49.00

FITS ALL MODELS WITH HOLLEY CARBURETORS AND WILL HELP COOL THE INTAKE CHARGE FOR BETTER PERFORMANCE.

( - Firebird/TransAm) HOLLEY CARBURETOR HEAT SHIELD

$29.00

(1968 - 1975 Firebird/TransAm) ALUMINUM CARBURETOR FITTING - THIS STYLE AND NUMBER WAS USED ON MOST ALL 68 69 FIREBIRD MODELS BUT ALSO CAN BE USED ON 70-75 FIREBIRD / FORMULA / TRANS AM MODELS. VERY RARE AND SOUGHT AFTER PART. THE GM NUMBER ON THIS PART IS 9792071. FITS 4BBL QUADRAJET CARBURETORS. THIS IS A STRAIGHT FITTING WITH ONE LARGE VACUUM PORT FOR POWER BRAKES AND ONE FOR DISTRIBUTOR/ACCESSORY

$19.00

(1972 - 1974 Firebird/TransAm) ALUMINUM CARBURETOR FITTING - USED ON MOST ALL 1972 FIREBIRD MODELS AND ALSO ON 1973-74 FIREBIRD / FORMULA / TRANS AM AND SUPER DUTY MODELS. THIS IS A VERY RARE AND SOUGHT AFTER PART. THE GM NUMBER ON THIS PART IS 487331. FITS 4BBL QUADRAJET CARBURETORS. IT HAS 2 VACUUM PORTS, ONE ANGLED FOR POWER BRAKES

$25.00

(1968 - 1974 Firebird/TransAm) FITTING IS COMMONLY MISSING OR BROKEN. IT IS A NICE FINISHING TOUCH FOR YOUR RESTORATION

$19.00

FITS ALL HOLLEY CARBURETORS CORRECT STANDARD SCREW BLADED STYLE

(1967 - 1992 Firebird/TransAm) FUEL BOWL SCREW - SET OF 8

$16.00

(1967 - 2002 Firebird/TransAm) HOLLEY FUEL FITTING 2627 8-20 IN. MALE 5/16" INSIDE THREAD - USED ON MOST ALL FACTORY APPLICATIONS THAT USE 5/16" FUEL LINE. THESE HAVE BEEN DISCONTINUED FROM HOLLEY AND ARE SOLD EACH. DUAL FEED CARBURETORS REQUIRE TWO

$8.00

(1968 - 1974 Firebird/TransAm) INTAKE VACUUM FITTING - MOUNTS ON THE INTAKE MANIFOLD ON RUNNER #1. THIS WILL PROVIDE A STRONG VACUUM SOURCE TO OPERATE VACUUM ON RAM AIR AND NON RAM AIR CARS

$12.00

FACTORY STYLE

(1971 - 1974 Firebird/TransAm) THROTTLE CABLE BALL STYLE AT CARB - FITS ALL 350/400/455 HO OR RAM AIR MOTORS. IT HAS A BALL STUD TO ATTACH TO THE CARBURETOR AND MOUNTS TO THE THROTTLE CABLE BRACKET IN A SQUARE CLIP

$59.00

( - Firebird/TransAm) VACUUM HOSE (CORRECT WHITE STRIPE) 5/32" HOSE - SOLD PER FOOT

$3.00

(1967 - 1981 Firebird/TransAm) WING NUT

$2.00